Caliber Crossover CXQ 3 Bedienungsanleitung
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r Caliber Crossover CXQ 3 (11 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war fĆ¼r 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/11
Thank you for choosing a Caliber product. In doing so youāve demonstrated a
desire to own the ļ¬nest in Car Audio Technology. Caliber strives to provide you
with the ļ¬nest products possible, and is always looking for ways to please our
customers even more.
Properly installed, your Caliber ampliļ¬er will provide years of high quality sonic
reproduction. Before installing this electronic bassdriver in your vehicle, please
read this entire manual carefully, in order to protect your vehicle, and get the
maximum performance of your mobile sound system.
Caliber Warranty
Due to the complexity of our products, we strongly recommend that this bass-
driver is installed and connected by your authorized Caliber dealer. If properly
installed and connected by your dealer, we provide a warranty for 12 month
from the date of purchase.
If you install and connect this bassdriver yourself, we wish you lots of fun and suc-
ces in doing so. If you follow our guidelines, youāll get the best result. Our warran-
ty, however, will be limited to, and not exceed 30 days from the date of purchase.
Caliber Accessories
To r ealize the exceptional performance of which this bassdriver is capable, it is
necessary that power sources, signal sources, speakers and interconnects are of
the highest quality. Remember that Caliber is not just an equalizer manufacturer.
We also manufacture everything needed for the āoptimalā Car Audio System
(except the car). So be sure to āGet Connectedā with Caliber and ask your local
Caliber dealer for our accessories.
Contents
Before you start your installation . . . . . . . . . . . . . . . . . . . . . .This page
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing and adjusting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Manuel de propriƩtaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Bedienungsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
BEFORE YOU START
F
D
A. Center Frequency
This knob is to be used to locate the correct resonance-frequency of the
subwoofer-enclosure you use.This is the frequency on which your subwoofer
will play the loudest. The center Frequency can be adjusted between 30Hz
and 400Hz, so the correct resonance for all types of subwooferenclosures is
within reach.
The Center Frequency knob can also be used to locate the frequencies that
sound a bit weaker or come on to strong. By changing the band-width (B)of
these frequencies, and adjusting the (output-)Level (C) you can adjust the
sound to your likings.This can be done directly for every new song, because
the remote control-unit must be mounted in-dash, so it can be adjusted from
the driversseat.
B. āQā-adjustment
This Q-knob allows you to narrow or
widen the band-width of the frequency
you found with your Center Frequency
knob. The band-width runs between
Q2 (very broad) to Q20 (very small).
The band-width Q2 is very broad.
This means that at both sides of the
set Center Frequency a greater area
of frequencies will be ampliļ¬ed or
weakened.A band-with of Q20 is very
small,so only the set Center Frequency
will be ampliļ¬ed or weakened (see
drawing).
This gives you complete control over the set frequency-area, without interfering
with the other (low-pass-)frequencies.
C. Level Control
No doubt that this will be the most used knob of your remote control. By
adjusting the Level between min. and max. you can amplify or weaken the set
frequency and band-width, and thus the volume.
A warning has to be made:Take care in using the level control. It can, in itās
max. position, amplify up to 24dB, which is a lot. Not every ampliļ¬er or
woofer will have the capability to handle such a lot of power. But if the
Center Frequency and band-width are well adjusted, a woofer can handle
quiet a lot of power,especially if the Center Frequency matches the resonance-
frequency of you sub-wooferenclosure.
Due to our effort to innovate and improve our products, this modern high per-
formance electronic bassdriver offers you the following features:
ā¢Delay remote output.
ā¢Input Level Control (0dB - 24dB)
ā¢Low-pass reversable phase (0Ā° - 90Ā° - 180Ā°).
ā¢Variable input sensitivity 250mV to 7V.
ā¢Low-pass stereo / mono mode
ā¢Output Level 15V/RMS
ā¢Channel Separation 65dB.
ā¢Signal to Noise Ratio 96dB.
ā¢Thermal, Overload and Short-circuit protection.
ā¢Excellent muting circuitry assures no turn on/off āpopsā.
ā¢Remote control with triple function.
ā¢Center Frequency tuning from 30Hz - 400Hz.
ā¢Adjustable band-width (Q2 - Q20).
ā¢Variable Output Level Control.
ā¢Fuse rating: 1A.
ā¢Dimensions: 180 x 160 x 33mm.
ā¢European design and engineering.
ā¢Superb Sonic performance for your āDream Machineā on wheels.
ā¢Years and years of acoustic pleasure.
The remote control shows you 3 knobs to play with.
A. Center Frequency (30Hz - 400Hz).
B. Q (band-width between Q2 - Q20).
C. Level (min. - max.)
CXR 3
CENTER FREQ.
30Hz 400Hz
CXR 3
Q
2 20
LEVEL
Min Max
Power
A B C
30Hz 400HzFreq.
Q20
Q2
1 With the stereo / mono selector switch, you can choose whether the output
signal will be in stereo or in mono.We advice you to put this switch in the
mono-position, especially if you have mounted more than one woofer in an
enclosure. Even if the ampliļ¬ers are used in a stereo mode, the mono posi-
tion of the CXQ 3 is adviced. In this way you will be sure that both channels
will get the exact same signal and that the woofers perform in an optimal way.
Also by the use of only one woofer the mono-position is adviced, allthough
it wouldnāt make much difference if the stereo-position is used.The only situation
in which the stereo-position is adviced and required, is when you use the CXQ 3
to drive a couple of mid-bass woofers. In that case there is a need for the stereo
sound, because frequencies above the 200Hz are very well hearable in stereo.
2 With the phase reversal switch it is possible to alter the phase of the signal by
0Ā°, 90Ā° or even 180Ā°.This can give a great advantage, especially if the woofers are
located on a great distance from the full-range speakers. This can give the
impression that the bass is a bit too late, compared to the full-range sound.
This is logical,because often the distance the bass-sound has to travel from the
back of the car, is twice the distance the full-range has to go in the front. By
shifting the phase with 90Ā° or 180Ā° this problem can be solved, however this
will not always be the case.
3 With the input level control you can amplify the input signal up to 24dB.This can
cause the output signal to become very powerfull, up to 15V.Therefore caution
must be taken by adjusting this inputlevel. It has a direct relation to the Level
Control on your remote control.The best way to get a correct adjustment for
your input level is to take it slowly,step by step. First put all the leveladjustments
in your system (also the ampliļ¬ers input) to a minimum.Then turn the volume
of your head-unit to 80% of the maximum. Now slowly start increasing the
input level on your CXQ 3. Keep turning up the input level until the clipping
LED (5) starts to ļ¬icker. Now the signal is adjusted correctly, and in most
cases, you wonāt even have to adjust the signal on your ampliļ¬er anymore.
4 The power LED illuminates when the CXQ 3 is turned on.When this LED is
not burning, there will be no power on the remote-signal, the +12V- or
ground cable.Also check if the fuse is still intact.
5 The clipping LED illuminates constantly when the output signal is clipping.This
can seriously damage your audio system. The clipping is caused by a too
strongly adjusted input level, and this input level should be turned down imme-
diately.When the clipping LED is ļ¬ickering, it indicates that the output signal is
around 7V, which is a safe value for most ampliļ¬ers and woofers.When you
have just insalled your CXQ 3, it is adviced to monitor this clipping LED regu-
lairy, in order to get a good adjustment for all your types of music.
Mounting your Caliber CXQ 3 BassDriver
Before mounting your Caliber CXQ 3 you must carefully choose the place
where it can be installed. Be sure that the power and signal cables can enter and
leave the CXQ 3 in a straight line, to avoid the risk of malfunction.
The CXQ 3 should be protected from exposure to moisture and direct sunlight.
If youāve decided where to place your Caliber CXQ 3, and youāve convinced
yourself there is enough protection from unusual hazards, mark the mounting
surface using the CXQ 3 as a template (Placing masking tape on these surfaces
ļ¬rst will make your markings more visible).
Drill 2.5 mm (1/8ā) diameter holes at the marked locations and mount the
ampliļ¬er using the supplied self-tapping screws.
Note: Do not drill any holes while using the CXQ 3 as a template.You
can easily damage the CXQ 3ās coating in this manner.
Installing and adjusting the CXQ 3
There are 10 points of attention that need explaining on the CXQ 3. Once you
have read this, you will ļ¬nd this BassDriver very easy to operate, and lots of fun
to play with.
1 Stereo / mono selector switch.
2 Phase recersal switch.
3 Input Level Control 0dB-24dB.
4 Power on LED.
5 Clipping LED.
6 Power and remote terminals.
7 Equalizer on/off switch.
8 Telephone jack for remote
control.
9 RCAās Signal in
10 RCAās Signal out
Input EQ
L R
Sub-Woofer
Remote Ctrl
+Output
L R
Sub-Woofer
MonoStereo
180Ā°0Ā°90Ā°
Sub-Woofer
Phase
Input Level
0dB +24dB
-R D/R
Power
Oļ¬
On
Clipping
+24dB
Q 2
Q 20
Fuse 1A
HIGH PERFORMANCE
ELECTRONIC BASSDRIVER
CXQ 3
CXQ 3
1
2
3
8 7 6
4 5
9 10
Produktspezifikationen
| Marke: | Caliber |
| Kategorie: | Autoradio |
| Modell: | Crossover CXQ 3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Caliber Crossover CXQ 3 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Autoradio Caliber
12 Oktober 2024
7 Oktober 2024
7 Oktober 2024
28 September 2024
11 September 2024
4 September 2024
3 September 2024
30 August 2024
30 August 2024
23 August 2024
Bedienungsanleitung Autoradio
- Autoradio Clatronic
- Autoradio Sanyo
- Autoradio Manta
- Autoradio Medion
- Autoradio Nedis
- Autoradio Philips
- Autoradio SilverCrest
- Autoradio Sony
- Autoradio Tevion
- Autoradio Panasonic
- Autoradio LG
- Autoradio AEG
- Autoradio Maginon
- Autoradio Technaxx
- Autoradio Denver
- Autoradio ECG
- Autoradio MarQuant
- Autoradio Renkforce
- Autoradio Telefunken
- Autoradio Trevi
- Autoradio Blaupunkt
- Autoradio Grundig
- Autoradio Kenwood
- Autoradio Daewoo
- Autoradio Pyle
- Autoradio Telestar
- Autoradio Aiwa
- Autoradio Auna
- Autoradio Lenco
- Autoradio Pioneer
- Autoradio JBL
- Autoradio JVC
- Autoradio KrĆ¼ger And Matz
- Autoradio Muse
- Autoradio Vieta
- Autoradio Hifonics
- Autoradio Akai
- Autoradio Dual
- Autoradio Hyundai
- Autoradio MT Logic
- Autoradio Orava
- Autoradio Orion
- Autoradio Skoda
- Autoradio Varta
- Autoradio Elta
- Autoradio Sencor
- Autoradio Biltema
- Autoradio OneConcept
- Autoradio Mercedes-Benz
- Autoradio Boston Acoustics
- Autoradio Harman Kardon
- Autoradio Magnat
- Autoradio XOMAX
- Autoradio Parrot
- Autoradio Smart
- Autoradio Alpine
- Autoradio Ford
- Autoradio Volkswagen
- Autoradio Volvo
- Autoradio Opel
- Autoradio MB Quart
- Autoradio Overmax
- Autoradio Rockford Fosgate
- Autoradio Crunch
- Autoradio Pure
- Autoradio NextBase
- Autoradio Norauto
- Autoradio AXTON
- Autoradio Clarion
- Autoradio Mac Audio
- Autoradio Conceptronic
- Autoradio Scott
- Autoradio Audiovox
- Autoradio Becker
- Autoradio ESX
- Autoradio Zenec
- Autoradio VDO
- Autoradio SPC
- Autoradio Roadstar
- Autoradio TokaĆÆ
- Autoradio Audison
- Autoradio Macrom
- Autoradio Phonocar
- Autoradio Xblitz
- Autoradio Autovision
- Autoradio Boss
- Autoradio Hertz
- Autoradio Renault
- Autoradio Fiat
- Autoradio Kicker
- Autoradio Jensen
- Autoradio DLS
- Autoradio Eclipse
- Autoradio Eltax
- Autoradio Emphaser
- Autoradio Focal
- Autoradio Fusion
- Autoradio Ground Zero
- Autoradio Helix
- Autoradio Impulse
- Autoradio Lanzar
- Autoradio Mtx Audio
- Autoradio Naxa
- Autoradio Revo
- Autoradio Rodek
- Autoradio RTO
- Autoradio Sevic
- Autoradio Sirius
- Autoradio Soundstream
- Autoradio Spectron
- Autoradio Stinger
- Autoradio Tamashi
- Autoradio Toxic
- Autoradio Twister
- Autoradio Ultimate
- Autoradio US Blaster
- Autoradio VDO Dayton
- Autoradio Voxx
- Autoradio VW
- Autoradio Watssound
- Autoradio RetroSound
- Autoradio Kunft
- Autoradio Shuttle
- Autoradio Multilaser
- Autoradio Brigmton
- Autoradio Lark
- Autoradio Majestic
- Autoradio SoundMAX
- Autoradio Scion
- Autoradio Raveland
- Autoradio Planet Audio
- Autoradio Adcom
- Autoradio Sendai
- Autoradio Cartronix
- Autoradio Dension
- Autoradio Mystery
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
16 Oktober 2024
16 Oktober 2024
12 Oktober 2024
8 Oktober 2024
6 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
3 Oktober 2024