Buffalo TeraStation 4200D Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Buffalo TeraStation 4200D (4 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/buffalo/terastation-4200d/html/bg1.png)
The TS4000 series will not work without disks. Please prepare 1 or more un-partitioned
HDDs for the setup process. Use either new HDD(s) or delete all partitions (and
therefore all data) with a partition editor before you start with existing HDD(s).
Step by step
1. Mount one or more HDDs to a frame and insert it in the TeraStation™.
2. Prepare the MicroSD and the USB adapter and insert the USB
adapter into a USB 2.0 port, connect power and network.
3. Move the boot switch to USB position.
4. Boot the TeraStation™.
Now the unit gives after some minutes a tone, the display
goes red and it says “push function button to start”.
5. Push the function button until beep sounds.
The display status color will be blue and sequence through these messages:
Recovery Preparing
System Recovering
FW/Updating
Recovery Finished, “Change Boot SW”
Setup Guide
TeraStation™ 4000
www.buffalo-technology.com
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/buffalo/terastation-4200d/html/bg2.png)
Setup Guide
TeraStation™ 4000
www.buffalo-technology.com
6. The TeraStation™ will shut down and the Power button will no
longer be lit green. The display and Info light stay on.
7. Remove the USB adapter, move the switch on the
back to HDD, press the power button
If you use just one drive you will have a brief warning for missing
HDDs and afterwards the TeraStation™ will operate normally.
If you use more than one drive: The first HDD is mounted and will work normally
and the other HDDs are mounted but not yet formatted. The display will therefore
turn red and the status LEDs of all unformatted drives will show red as well.
The warning, red display, and red LEDs will remain until you finish formatting all HDDs.
8. Now please install the NAS Navigator on your computer and click
‘Refresh’ to reveal your new TeraStation™ 4000. Right click on it and select
‘Settings’. A browser window will launch the admin interface. It’s also
possible to access the admin interface by entering the TS4000 series IP
address (shown on the TS’s display) directly into a browser window.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/buffalo/terastation-4200d/html/bg3.png)
Setup Guide
TeraStation™ 4000
www.buffalo-technology.com
9. Format all unformatted HDDs via the admin interface. Once formatting
is completed the status in the admin page will change to ‘Formatted’
please wait to see this before continuing, depending on HDD
capacity this could take approximately 8 minutes per drive.
Produktspezifikationen
Marke: | Buffalo |
Kategorie: | Server |
Modell: | TeraStation 4200D |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Buffalo TeraStation 4200D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Server Buffalo
![Buffalo](/images/pdf_free.png)
3 August 2024
![Buffalo](/images/pdf_free.png)
1 August 2024
![Buffalo](/images/pdf_free.png)
29 Juli 2024
![Buffalo](/images/pdf_free.png)
28 Juli 2024
![Buffalo](/images/pdf_free.png)
26 Juli 2024
![Buffalo](/images/pdf_free.png)
26 Juli 2024
![Buffalo](/images/pdf_free.png)
24 Juli 2024
![Buffalo](/images/pdf_free.png)
20 Juli 2024
![Buffalo](/images/pdf_free.png)
20 Juli 2024
![Buffalo](/images/pdf_free.png)
15 Juli 2024
Bedienungsanleitung Server
- Server Acer
- Server Asus
- Server Gigabyte
- Server HP
- Server Medion
- Server Sony
- Server Allnet
- Server Linksys
- Server Netgear
- Server Fantec
- Server Megasat
- Server Toshiba
- Server Lindy
- Server Dell
- Server Lenovo
- Server Tripp Lite
- Server TRENDnet
- Server Western Digital
- Server AVerMedia
- Server Veritas
- Server Black Box
- Server Supermicro
- Server SilverStone
- Server NEC
- Server Monacor
- Server Seagate
- Server Fujitsu
- Server Maxdata
- Server Revox
- Server Conceptronic
- Server D-Link
- Server QNAP
- Server Digitus
- Server LevelOne
- Server APC
- Server Cisco
- Server Freecom
- Server Synology
- Server Intellinet
- Server Eaton
- Server Hikvision
- Server FLIR
- Server Planet
- Server Asustor
- Server Blackmagic Design
- Server Dane Elec
- Server GeoVision
- Server Ibm
- Server Iomega
- Server LaCie
- Server Provision ISR
- Server Quantum
- Server AMX
- Server ACTi
- Server Vimar
- Server Siig
- Server Moxa
- Server StarTech.com
- Server Smart-AVI
- Server SEH
- Server Gefen
- Server Avocent
- Server Atlantis Land
- Server Hanwha
- Server ATen
- Server Axis
- Server Advantech
- Server B&B Electronics
- Server Infortrend
- Server Areca
- Server Promise Technology
- Server Matrox
- Server Origin Storage
- Server C2G
- Server Chenbro Micom
- Server Lantronix
- Server Valcom
- Server TAIDEN
- Server NETSCOUT
Neueste Bedienungsanleitung für -Kategorien-
![Synology](/images/pdf_free.png)
8 September 2024
![APC](/images/pdf_free.png)
8 September 2024
![Valcom](/images/pdf_free.png)
6 September 2024
![Supermicro](/images/pdf_free.png)
6 September 2024
![Supermicro](/images/pdf_free.png)
6 September 2024
![Supermicro](/images/pdf_free.png)
6 September 2024
![Supermicro](/images/pdf_free.png)
5 September 2024
![Blackmagic Design](/images/pdf_free.png)
4 September 2024
![Blackmagic Design](/images/pdf_free.png)
4 September 2024
![Blackmagic Design](/images/pdf_free.png)
4 September 2024