BOYA BY-BM3032 Bedienungsanleitung

BOYA Mikrofon BY-BM3032

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BOYA BY-BM3032 (1 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
BY-BM3032 13
8
12
10
9
11
7
Thanks for choosing BOYA!
TheBOYA BY-BM3032is a supercardioid on-camera shotgun
microphone oering directional audio capture, adjustable gain
(-10dB, 0, +20dB), High Pass Filter (0Hz, 75Hz, 150Hz) and broad
device compatibility for video production, vlogging, YouTubers,
and sound recordists.It also features the safety channel option on
right channel which helps you select wanted sound level
when you are not sure how loud the audio be captured or some
unexpected screeched might be.
And a selectable 5dB boost button for high frequency can allow
to used in some situation, such as using microphone outside with
fur windscreen.
With 3.5mm TRS jack, the microphone can be used to capture
audio for camcorders, DSLR, and portable recorders, It can run
for approximately 30 hours on two AA batteries.
1. Power Indicator
2. Mic ON/OFF
- Long press power button to power ON
- Short press power button to power OFF
3. High Pass Filter (0Hz, 75Hz, 150Hz)
4. Three position level control (-10dB, 0, +20dB)
5. High Frequency Boost LED
6. Safety Channel Indicator
7. 3.5 mm (1/8") Headphone Jack
8. Foam windscreen
9. Battery Compartment
10. Shock Mount
11. Camera Shoe Mount with 1/4” Thread
12. 3.5 mm (1/8") TRS Audio cable
Cable in illustrations is shown shorter for clarity. Note:
The actual cable is longer than the one pictured.
13. Fur windscreen
1. Press the button of battery compartment lid down and lift it up.
2. Insert the 2pcs of AA batteries. Make sure that the + and – signs
match the symbols in the compartment.
3. Replace the battery compartment lid.
INSTALLING THE BATTERY
SETTING UP YOUR MICROPHONE
To attach your microphone to a camera:
To attach your microphone to a tripod:
High-Pass Filter
The safty Channel
Automatic Power Function
High Frequency Boost
Sound Gain Level
• Microphone
• Foam windscreen
• Fur windscreen
• Carrying pouch
• Quick Setup Guide
1. Loosen the locking knob, then slide your microphone’s shoe
mount onto your camera.
2. Tighten the locking knob to secure your microphone.
3. Connect the 3.5 mm audio cable to your camera.
- Long press (dB±) button to make the output of the right channel of
the dual-mono signal lower by 10dB, the LED (dB±) will stay blue.
- Long press (dB±) button again to cancel this function, the LED (dB±)
will be o.
- If you're not sure how loud the audio you're capturing or
unexpected spikes might be, you can set the right channel
to record at a lower 10dB for safety.
- Short press low-cut ter switch ( ) to
select lter settings (0Hz, 75Hz, 150Hz).
- Long press High-Pass Flter switch ( )
to boost high frequency by 5dB.
When this function activate, the ( )
LED will stay blue.
- Long press High-Pass Flter switch ( )
again to cancel this function, the LED
will be o.
- Short press (dB±) button to select settings(-10dB, 0, +20dB)
1. Tighten the microphone to the 1/4" screw on a tripod or tripod plate.
See the instructions that came with your tripod for more information.
2. Connect the 3.5 mm audio cable to your camera.
1/4" mounting threads
- Long press power botton ( ) for 1 seconds to activate automatic
Power ON/OFF.
When plug microphone into a DSLR camera or portable recorder’s
3.5mm microphone input, the microphone can be automatically
power ON/OFF when equipment (DSLR camera or portable recorder)
is ON/OFF.
- Long press power botton ( ) for 1 seconds to cancel automatic
Power ON/OFF.
Status
The automatic Power ON/OFF
function is activate.
The automatic Power ON/OFF
function is cancelled.
The Power LED indicator ashes 3 times.
The Power LED indicator ashes 1 time.
PACKAGE CONTENTS
Directional On-camera Microphone
Instruction Manual
INSTRUCTURE
HOW TO USE
3 4
6
1
2
5
• For DSLR, Camcorder, Audio recorder
• Excellent O-Axis Signal Rejection
• Super-cardioid Polar Pattern
• Low Noise and Distortion
• 20 Hz to 20 kHz Frequency Response
• Features the Safety Channel function for Right Channel
• Automatic Power Function
• Three-step High Pass Filter (0Hz, 75Hz, 150Hz)
• Three position level control (-10dB, 0, +20dB)
• 3.5mm (1/8") Mini-Jack Output
• Includes fur Windjammer
• 2*1.5V Battery Powered
Acoustic Principle:
Polar Pattern:
Frequency Response:
Sensitivity:
Output Impedance:
S/N:
Gain Control:
High Pass Filter:
Output Connector:
Power Requirement:
Operating time with battery:
Size:
Weight:
Line gradient
Super-cardioid
20 – 20,000 Hz
-30±3dB (0dB=1V/Pa @ 1KHz)
200Ω
85dB
-10dB, 0dB, +20dB
0Hz, 75Hz, 150Hz
3.5 mm (1/8") stereo mini-jack
1.5V*2AA
30H
209.7 x 103.3 x 50mm (8.2” x 4” x 2”)
180g (6.3 oz)
FEATURES:
USING YOUR MICROPHONE
SPECIFICATION
www.boya-mic.com
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by
Shenzhen Jiayz Photo Industrial., Ltd.
COPY RIGHT 2010-2020
Email: sales@boya-mic.com
www.boya-mic.com / www.jiayz.com
105x178
深圳市长丰影像器材有限公司
品牌
子件名称 版本
材质
比例
审核 暂无
吴蒙蒙
2019-6-26 核准/日期 赵宏亮
单位1:1 mm尺寸
子件编号
设计/日期
长丰型号
8
变更日期 变更担当变更内容版本修改名称
7
1 2
BY-BM3032说明书
BOYA BY-BM3032
1F0300300203
V00
105g双铜纸 双面印刷 4折
吴蒙蒙
长丰影像
2019-6-26
技术要求:
1、表面无色差
2、无正负公差
3、包装标注尺寸为内尺寸


Produktspezifikationen

Marke: BOYA
Kategorie: Mikrofon
Modell: BY-BM3032

Brauchst du Hilfe?

Wenn Sie Hilfe mit BOYA BY-BM3032 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon BOYA

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-