Bosch GWX10-45E Bedienungsanleitung
Bosch
Winkelschleifer
GWX10-45E
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bosch GWX10-45E (88 Seiten) in der Kategorie Winkelschleifer. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/88
For English Version
See page 2
Version française
Voir page 30
Versión en español
Ver la página 59
IMPORTANT
Read Before Using
IMPORTANT
Lire avant usage
IMPORTANTE
Leer antes de usar
Operating / Safety Instructions
Consignes d’utilisation / de sécurité
Instrucciones de funcionamiento y seguridad
Call Toll Free for Consumer Information & Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
GWX10-45E
GWX10-45PE
GWX10-45DE
160992A4FG 06-19 GWX10.indd 1 6/3/19 10:33 AM
-2-
page headingContents
Safety Symbols 3 ............................................
General Power Tool Safety Warnings 3 ...........
Work Area Safety 3 .......................................
Electrical Safety 3 .........................................
Personal Safety 3 ..........................................
Power Tool Use and Care 4 ...........................
Service 4 .......................................................
Power Tool-Specific Safety Warnings 5 ...........
Safety Warnings Common
for Grinding, Sanding, Wire
Brushing, and Abrasive
Cutting-Off Operations 5 ..............................
Kickback and Related Warnings 6 .................
Safety Warnings Specific
for Grinding and Abrasive
Cutting-Off Operations 7 ..............................
Additional Safety Warnings
Specific for Abrasive
Cutting-Off Operations 7 ..............................
Safety Warnings Specific for
Sanding Operations 7 ...................................
Additional Safety Warnings 8 ..........................
Safety Warnings Specific for
Wire Brushing Operations 8 ..........................
Symbols 9 .......................................................
Functional Description and
Specifications 11 ............................................
Basic X-Lock Operation 14 ..............................
Assembly 15 ....................................................
Installing Side Handle 15 ..............................
Hand Shield 15 .............................................
Installing Wheel Guards
(Type 27 and Type 41/1A
Wheel Guards) 16 .........................................
Mounting and Removing
X-Lock Accessories 17 ..................................
Abrasive Type 27 Grinding
Wheel & Sanding Flap Disk
Assembly 19 ..................................................
Abrasive Type 41/1A
Cutting Wheel Assembly 19 ..........................
Sanding Assembly 20 ...................................
Wire Cup Brush Assembly 21 ........................
Wire Wheel Assembly 21 ...............................
Masonry Cutting Guard
Assembly 22 ..................................................
Installing Masonry Type 41/1A
Cutting Guard 23 ..........................................
Installing Dry Diamond Wheel..................23
Operating Instructions 24 ...............................
Paddle Switch (Fig. 21) 24 ...........................
Slide Switch (Fig. 23) 24 ..............................
Metal Grinding 25 .........................................
Metal Cutting 25 ...........................................
Masonry / Concrete Cutting 26 ....................
Sanding 27 ....................................................
Wire Brush (Wheels and Cups) 28 ................
Maintenance 28 ..............................................
Service 28 .....................................................
Tool Lubrication 28 .......................................
Carbon Brushes 29 .......................................
Cleaning 29 ...................................................
Accessory Storage &
Maintenance 29 ............................................
Extension Cords.........................................29
Accessories 29 ................................................
160992A4FG 06-19 GWX10.indd 2 6/3/19 10:33 AM
-3-
page heading
Safety Symbols
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
General Power Tool Safety Warnings
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or seri-
ous injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
▶ Work Area Safety
Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
▶ Electrical Safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is
an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for out-
door use reduces the risk of electric shock.
If operating a power tool in a damp loca-
tion is unavoidable, use a Ground Fault
Circuit Interrupter (GFCI) protected sup-
ply. Use of an GFCI reduces the risk of
electric shock.
▶ Personal Safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
160992A4FG 06-19 GWX10.indd 3 6/3/19 10:33 AM
Produktspezifikationen
| Marke: | Bosch |
| Kategorie: | Winkelschleifer |
| Modell: | GWX10-45E |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bosch GWX10-45E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Winkelschleifer Bosch
11 Oktober 2024
10 Juli 2024
6 Juli 2024
6 Juli 2024
4 Juli 2024
4 Juli 2024
Bedienungsanleitung Winkelschleifer
- Winkelschleifer Makita
- Winkelschleifer Flex
- Winkelschleifer Parkside
- Winkelschleifer AEG
- Winkelschleifer Black And Decker
- Winkelschleifer FERM
- Winkelschleifer Skil
- Winkelschleifer Topcraft
- Winkelschleifer Trotec
- Winkelschleifer Sparky
- Winkelschleifer Bort
- Winkelschleifer DeWalt
- Winkelschleifer Einhell
- Winkelschleifer Maktec
- Winkelschleifer Stayer
- Winkelschleifer Worx
- Winkelschleifer Tacklife
- Winkelschleifer Hikoki
- Winkelschleifer Hitachi
- Winkelschleifer Max
- Winkelschleifer Metabo
- Winkelschleifer Stanley
- Winkelschleifer Power Craft
- Winkelschleifer Scheppach
- Winkelschleifer Meec Tools
- Winkelschleifer Batavia
- Winkelschleifer Brüder Mannesmann
- Winkelschleifer Milwaukee
- Winkelschleifer Toledo
- Winkelschleifer Ozito
- Winkelschleifer Gamma
- Winkelschleifer Lux Tools
- Winkelschleifer Black Decker
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
14 Oktober 2024
13 Oktober 2024
27 August 2024
27 August 2024
24 August 2024
24 August 2024
24 August 2024
23 August 2024