Bosch AutoDome VG4-MCAM-22 Bedienungsanleitung

Bosch Sicherheitskamera AutoDome VG4-MCAM-22

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bosch AutoDome VG4-MCAM-22 (12 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 33 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

CCTV | AutoDome Modules and Accessories

The Bosch AutoDome modular camera system is a

revolutionary new concept in dome cameras. The entire

AutoDome system is based on five interchangeable

modules: the Central Processing Unit (CPU), camera,

housing, communications, and power supply. Simply swap

one of the AutoDome’s interchangeable modules and

quickly upgrade from analog to IP, color to day/night, or add

motion detection, and AutoTrack. Never before have you

had the ability to adapt a security system to your changing

needs this quickly or inexpensively.

The Bosch AutoDome also features a selection of power

supply and mounting accessories with clear or tinted

bubbles.

Interchangeable modules

Five interchangeable modules allow you to update camera

functionality quickly and cost-effectively. Using common

components lets you install a basic camera system today

and migrate to a more advanced version tomorrow –

without having to replace the entire dome, thus protecting

your initial investment.

By using the same housing components, all installations

have a consistent look, and observers have no idea which

type of camera (if any) is watching over them. This unique,

modular design also gives you the flexibility to move

cameras between different housings when special coverage

is needed, or as site plan requirements change. For

example, an 18x PTZ camera over a specific area could

easily be “hot-swapped” to a 26x day/night without

removing the power. AutoDome’s Ethernet communications

module allows you to add IP functionality while maintaining

connectivity to existing analog inputs and outputs.

Functions

CPU Modules

100 Series CPU Module

The 100 Series CPU module provides fixed camera

functionality, “hotswap” camera module replacement,

pluggable communications module upgrades, and built-in

surge suppression.

200 Series CPU Module

The 200 Series CPU module delivers fast 360° per second

pan/tilt/zoom speeds, “hotswap” camera module

replacement, pluggable communications module upgrades,

built-in surge suppression, advanced diagnostics, and

multilingual displays.

This module supports 64 pre-positions and a single preset

tour. The preset tour has the capacity for up to 64 pre-

positions with a configurable dwell time between pre-

positions.

AutoDome Modules and Accessories

▶Interchangeable Central Processing Unit (CPU),

Camera, Housing and Communications modules

▶Analog and Hybrid (analog/IP) Communications

module options

▶24 VAC, 120 VAC, and 230 VAC Power Supply Units

with an optional Fiber Optic Module

▶Roof, Pipe, and Pendant Arm Mounting Systems

▶Analog and IP Fiber Optic Communication Units

▶Rugged Polycarbonate and High-resolution Acrylic

Bubble Options

www.boschsecurity.com

2 | AutoDome Modules and Accessories

300 Series CPU Module

The 300 Series CPU module includes all of the features of

the 200 Series plus additional presets and tours, cable

compensation to extend cabling distances, and third-party

protocol support. The Advanced Series also supports

privacy masking and advanced alarm handling via a built-in

rules engine.

500i Series CPU Module

The 500i Series CPU module includes all of the features of

the 300 Series plus AutoTrackII motion tracking and video

motion detection.

Camera Modules

High-performance Fixed Camera

The high-performance fixed cameras have a 1/3-inch

interline CCD with Bosch’s unique 15-bit Dinion digital

imaging technology to deliver a 32-fold sensitivity

improvement and a full 540 horizontal lines of resolution.

Available in color and day/night versions, these cameras

incorporate a number of features not found in other fixed

dome cameras.

High-performance 18x PTZ Color Camera

The high-performance 18x PTZ color cameras have a 1/4-

inch color CCD. With 470/480 TVL (NTSC/PAL) horizontal

resolution and sensitivity down to 0.5 lux, this camera offers

exceptional performance at an affordable price. A rugged

motor with fewer moving parts mean that this camera uses

less power and is extremely reliable, making it ideal for high-

usage applications.

High-performance 18x and 26x PTZ Day/Night Camera

The high-performance PTZ day/night cameras have

470/480 TVL (NTSC/PAL) horizontal resolution. These

cameras are available with either an 18x or a 26x optical

zoom lens, and all cameras offer a full 12x digital zoom. The

AutoScaling (proportional zoom) and AutoPivot

(automatically rotates and flips the camera) features ensure

optimal control.

High-performance 36x PTZ Day/Night Camera

Bosch offers the industry-leading 36x optical zoom lens

with a full 12x digital zoom. The 36x camera provides a full

540 TVL of horizontal resolution for outstanding clarity and

image detail. The 36x camera also incorporates an

advanced backlight compensation technology that

dramatically improves the dynamic range by 128 times,

resulting in clear image reproduction in extreme high-

contrast environments.

Housing Modules

All housings feature recessed screws and latches for

increased tamper resistance.

AutoDome pendant housings (indoor and outdoor) are

rated to provide IP 66 protection. In addition, the pendant

housings come equipped with a low-impact, high-resolution

acrylic bubble for enhanced image clarity

AutoDome in-ceiling housings provide IP 54 protection and

are rated IK 8 (IEC 62262). These housings feature an

impact-resistant polycarbonate Rugged Bubble to protect

your camera from vandalism. The Rugged Bubble can

withstand impacts equivalent to a 4.5 kg (10 lb) weight

dropped from a height of 3 m (10 ft).

Outdoor EnviroDome housings provide an operating

temperature range down to -40°C (-40°F). The optional “XT”

extreme temperature kit allows an AutoDome to operate in

temperatures down to -60°C (-76°F), ensuring reliable

operation in even the harshest environments.

The Pressurized Environmental Housing is rated to provide

IP 67 protection for a VG4 Series AutoDome ® Modular

Camera System from the elements, both natural and

manmade. It is the ideal surveillance solution for

applications that require frequent wash-down, including

traffic, transit, bridges, tunnels and coastal installations

where salt, moisture, dust, insects and fumes threaten the

long-term operation of the camera.

Communications Modules

Fixed Communications Module

The Fixed Communications Module (standard on the

AutoDome 100 Series) supports a variety of standard video

and data transmission methods, including Bilinx (over coax

and UTP) remote control, configuration, and firmware

updates can also be performed over these cables, offering

you unparalleled control of your cameras.

Standard Analog Communications Module

The Standard Analog Communications Module (standard on

the AutoDome 200 and 300 Series) supports a variety of

data transmission methods, including Bilinx (over coax and

UTP) and fiber. Remote control, configuration, and

firmware updates can also be performed over these cables,

offering you unparalleled control of your cameras. Cable

compensation provides extended coaxial and UTP distance

runs while preventing the image quality degradation caused

by signal losses from long cable lengths.

Alternative Protocol Communications Module

The Alternative Protocol Module allows you to control a VG4

AutoDome from an American Dynamics Manchester or

Sensormatic RS-422 PTZ control device.

TCP/IP Communications Module

The TCP/IP Communications Module is an integral part of

Bosch’s AutoDome Modular Camera System, adding

network connectivity to any AutoDome 100, 200, 300 or

500i Series camera. The TCP/IP module provides complete

network-based control of all dome functionality including

pan/tilt/zoom operation, presets, tours, and alarms as well

as web-based configuration of all dome settings.

AutoDome Modules and Accessories | 3

AutoDome cameras equipped with the TCP/IP

Communications Module deliver true hybrid operation.

With both Ethernet and analog BNC connections, network-

enabled AutoDome cameras provide direct network

connection while simultaneously supporting existing analog

equipment. The TCP/IP Communications Module uses the

latest compression technology, bandwidth throttling, and

tri-streaming capabilities to efficiently manage bandwidth

and storage requirements while delivering outstanding

image quality.

Power Supplies

Bosch offers a variety of power supply units that are

available with 24 VAC, 120 VAC, or 230 VAC transformers,

come with an optional analog, multimode Fiber Optic video

transmitter/data receiver module, and are NEMA-rated.

Accessories

Fiber Optic Kits

The VG4-SFIBER-MM (multimode) is an analog, fiber optic

conversion kit for use with VG4 Series AutoDomes using

either the Fixed or the Standard Communications Modules.

This module is a video transmitter/data receiver modules

designed to be mounted directly into a VG4 AutoDome

power supply box.

The VG4-SFPSCKT is a unique media converter module for

use with VG4 series AutoDomes incorporating the Ethernet

(TCP/IP) Communications Module. This media converter

module is designed to accept any of the 10/100 Mbps SFP

modules described below.

The media converter module along with the SFP module is

user installed directly into the AutoDome's power supply

box to provide an integrated fiber optic solution.

Mounts

Bosch offers three mounting options for the AutoDomes:

roof, pipe, or pendant arm mounts. The pendant arm

mounts come with a connected power supply unit. In

addition, Bosch offers an accessory to mount a unit in an

upright position on a flat surface.

Bubbles

All housings feature recessed screws and latches for

increased tamper resistance. AutoDome in-ceiling models

feature an impact-resistant rugged polycarbonate bubble to

protect your camera from vandalism. Designed to meet

stringent strength standards without compromising optical

clarity, the Rugged Bubble can withstand impacts

equivalent to a 10 pound (4.5 kilograms) weight dropped

from a height of 10 feet (3 meters). AutoDome pendant

cameras come equipped with a low-impact, high-resolution

acrylic bubble for enhanced image clarity, but can easily be

upgraded to the Rugged Bubble when needed.

Both the rugged polycarbonate and the high-resolution

acrylic bubbles are available in clear, tinted (smoke), gold

and chrome. The clear bubble offers maximum sensitivity by

allowing as much light through as possible. The tinted, gold

and chrome bubbles offer covertness by making it difficult

to see the direction the camera is looking from the outside.

Certifications and Approvals

Region Certification

Europe CE VG4-1ab-cdefgh, VG4-2ab-cdefgh,

VG4-3ab-cdefgh, VG4-5ab-cdefgh, VG4-

A-PAxx, VG4-A-PSUxx

Electromagnetic Com-

patibility (EMC)

Complies with FCC Part 15, ICES-003, and CE

regulations

Product Safety Complies with CE regulations, UL, CSA, EN, and

IEC Standards

Technical Specifications

Central Processor Unit Modules

VG4-MCPU-100 Unity Pass-through CPU, 100 Series

VG4-MCPU-200 Basic CPU, 200 Series

VG4-MCPU-300 Standard CPU, 300 Series

VG4-MCPU-500 Advanced CPU with Video Content Analysis, 500 Ser-

ies

Camera Modules

2.7–13.5 mm Fixed Color Camera

Availability 100 Series only

VG4-MCAM-51 PAL

VG4-MCAM-61 NTSC

Imager 1/3 in. Interline CCD

(752 x 582 PAL)/(768 x 492 NTSC)

Lens

Iris Automatic

Field of View 78.3° to 18.5°

Video Output 1.0 Vp-p, 75 Ohm

Gain Control Off, auto (with adjustable limit), and manual

Synchronization Line-Lock (0° to 358° vertical phase adjust) or

internal crystal

Aperture Correction Horizontal and vertical

Horizontal Resolution 540 TVL (NTSC)/540 TVL (PAL)

Sensitivity 30 IRE 50 IRE (typical)

SensUp Off 0.29 lx 0.9 lx

SensUp On (15x) 0.029 lx 0.09 lx

www.boschsecurity.com

Produktspezifikationen

Marke:	Bosch
Kategorie:	Sicherheitskamera
Modell:	AutoDome VG4-MCAM-22

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bosch AutoDome VG4-MCAM-22 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Sicherheitskamera Bosch

Bosch AutoDome VG4-61 Bedienungsanleitung

18 April 2024

Bosch NTC-255-PI Bedienungsanleitung

13 April 2024

Bosch AutoDome VG4-313 Bedienungsanleitung

8 April 2024

Bosch VOT-320 Bedienungsanleitung

22 Februar 2024

Bosch AutoDome VG4-MCAM-22 Bedienungsanleitung

22 Februar 2024

Bosch NTE-3503-F03L Bedienungsanleitung

13 Februar 2024

Bosch WZ16 Bedienungsanleitung

4 Februar 2024

Bosch KBE-485 Bedienungsanleitung

11 Januar 2024

Bosch AutoDome IP Starlight NDP-5512-Z30-P Bedienungsanleitung

20 Dezember 2023

Bosch Dinion KBE-455V55 Bedienungsanleitung

15 Dezember 2023

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung für -Kategorien-

ZKTeco BL-34F26L Bedienungsanleitung

11 August 2024

Dahua Technology A42BJA2 Bedienungsanleitung

18 April 2024

Mobotix MX-D16A-F-6D6N061 Bedienungsanleitung

18 April 2024

Axis Q6125-LE 50HZ Bedienungsanleitung

17 April 2024

ACTi A23 Bedienungsanleitung

17 April 2024

Pelco Sarix Enhanced IME839-1ERS Bedienungsanleitung

16 April 2024

HiLook IPC-T120-D Bedienungsanleitung

16 April 2024

Smartwares HA32S Bedienungsanleitung

16 April 2024

Hikvision DS-2CE5582P-VFIR3 Bedienungsanleitung

16 April 2024

AirLive MD-3025 Bedienungsanleitung

16 April 2024