Bogen HTA250A Bedienungsanleitung

Bogen Empfänger HTA250A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bogen HTA250A (8 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

Specifications subject to change without notice.

HTA125A/250A

Power Amplifiers

Installation & Use Manual

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

NOTICE: Every effort was made to ensure that the information in this guide was complete

and accurate at the time of printing. However, information is subject to change.

WARNING: To reduce the risk of Fire or Electric Shock, Do Not Expose this apparatus

to rain or moisture.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases shall be placed on the apparatus.

WARNING: Only connect unit to AC mains outlet providing protective earthing connection.

NOTE: Mains plug is used as disconnect device from the mains and shall remain readily

accessible and operable.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the

risk of electric shock, do not perform any servicing other than that contained in the operating

instructions unless you are qualified to do so.

CAUTION: DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET, OR IN

ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT THE RISK

OF SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

Always follow these basic safety precautions when installing and using the unit:

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean unit with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong.

The wide blade, or the third prong, are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when not used for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

CAUTION: TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE ANY FRONT/BACK COVERS

OR PANELS. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

The exclamation point within an equilateral triangle is in-

tended to alert the user to the presence of important

operating and maintenance (servicing) instructions.

The lightning flash with arrowhead symbol, within an equi-

lateral triangle, is intended to alert the user to the presence of

uninsulated "dangerous voltage" within the product's enclo-

sure that may be of sufficient magnitude to constitute a risk

of electric shock to persons.

Panel Diagrams

HTA125A

HTA125A/250A

HTA250A

1. Power Cord:

Ground Pin Connected to Chassis

2. 120V AC Outlet

(Not Switched)

3. AC Line Fuses

4. Output Connections

5. Balanced Input

(Accessory Transformer Required)

6. Unbalanced Input

7. Input Level Adjustment

1. Overload Shut Down Indicator 2. ON/OFF Power Switch

FRONT PANEL

REAR PANELS

Produktspezifikationen

Marke:	Bogen
Kategorie:	Empfänger
Modell:	HTA250A
Breite:	483 mm
Tiefe:	279 mm
Gewicht:	22700 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Höhe:	133 mm
AC Eingangsspannung:	100-127 V
AC Eingangsfrequenz:	50 - 60 Hz
Lautstärkeregler:	Drehregler
Betriebsanleitung:	Ja
LED-Anzeigen:	Ja
Audio Kanäle:	- Kanäle
THD, totalklirren:	0.5 %
Rauschverhältnis (SNR):	90 dB
Frequenzbereich:	20 - 20000 Hz
Benutzerhandbuch:	Ja
Leistungshöhepunkt pro Kanal:	250 W
Rack-Kapazität:	1U
Output Widerstand:	8 Ohm