Blomberg WNF 7300 WE20 Bedienungsanleitung

Blomberg Waschmaschine WNF 7300 WE20

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Blomberg WNF 7300 WE20 (68 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/68
Washing Machine
Waschmaschine
Πλυντήριο Ρούχων
Lavatrice
User‘s Manual
Bedienungsanleitung
Εγχειρίδιο Χρήστη
Manuale utente
WNF 7300 WE20
WNF 7361 SCE20
2EN
1 Important safety instructions
This section contains safety instructions that will help protect
from risk of personal injury or property damage. Failure to
follow these instructions shall void any warranty.
General safety
• 8yearsandolderchildrenandpeoplewithreduced
physical, sensory, and mental abilities as well as
unskilled or inexperienced persons can use this
appliance provided that they are supervised and
instructed on safe use of the appliance as well as to the
related dangers. Children should not play or tamper with
the appliance. Cleaning and user maintenance should
never be performed by children unless supervised by a
responsible adult.
• Neverplacetheproductonacarpet-coveredfloor;
otherwise, lack of airflow beneath the machine will
cause electrical parts to overheat. This will cause
problems with your product.
• Donotoperatetheproductifthepowercable/plugis
damaged. Call the Authorized Service Agent.
• Haveaqualifiedelectricianconnecta16-Amperefuse
to the installation location of the product.
• Iftheproducthasafailure,itshouldnotbeoperated
unless it is repaired by the Authorized Service Agent.
There is the risk of electric shock!
• Thisproductisdesignedtoresumeoperatinginthe
eventofpoweringonafterapowerinterruption.Ifyou
wish to cancel the programme, see "Cancelling the
programme" section.
• Connecttheproducttoagroundedoutletprotected
by a fuse complying with the values in the "Technical
specifications"table.Donotneglecttohavethe
groundinginstallationmadebyaqualifiedelectrician.
Our company shall not be liable for any damages that
will arise when the product is used without grounding in
accordance with the local regulations.
• Thewatersupplyanddraininghosesmustbesecurely
fastened and remain undamaged. Otherwise, there is
the risk of water leakage.
• Neveropentheloadingdoororremovethefilterwhile
there is still water in the drum. Otherwise, risk of
flooding and injury from hot water will occur.
• Donotforceopenthelockedloadingdoor.Theloading
door will be ready to open just a few minutes after the
washingcyclecomestoanend.Incaseofforcingthe
loading door to open, the door and the lock mechanism
may get damaged.
• Unplugtheproductwhennotinuse.
• Neverwashtheproductbyspreadingorpouringwater
onto it! There is the risk of electric shock!
• Nevertouchtheplugwithwethands!Neverunplugby
pulling on the cable, always pull out by grabbing the
plug.
• Usedetergents,softenersandsupplementssuitablefor
automatic washing machines only.
• Followtheinstructionsonthetextiletagsandonthe
detergent package.
• Theproductmustbeunpluggedduringinstallation,
maintenance, cleaning and repairing procedures.
• Alwayshavetheinstallationandrepairingprocedures
carried out by the Authorized Service Agent.
Manufacturer shall not be held liable for damages that
may arise from procedures carried out by unauthorized
persons.
Intended use
• Thisproducthasbeendesignedfordomesticuse.Itis
not suitable for commercial use and it must not be used
out of its intended use.
• Theproductmustonlybeusedforwashingandrinsing
of laundry that are marked accordingly.
• Themanufacturerwaivesanyresponsibilityarisenfrom
incorrect usage or transportation.
Children's safety
• Electricalproductsaredangerousforthechildren.Keep
childrenawayfromtheproductwhenitisinuse.Donot
letthemtotamperwiththeproduct.Usechildlockto
prevent children from intervening with the product.
• Donotforgettoclosetheloadingdoorwhenleavingthe
room where the product is located.
• Storealldetergentsandadditivesinasafeplaceaway
from the reach of the children.
2 Installation
Refer to the nearest Authorised Service Agent for installation
of the product. To make the product ready for use, review
the information in the user manual and make sure that the
electricity, tap water supply and water drainage systems are
appropriatebeforecallingtheAuthorizedServiceAgent.Ifthey
arenot,callaqualifiedtechnicianandplumbertohaveany
necessary arrangements carried out.
C Preparation of the location and electrical, tap water and
waste water installations at the place of installation is
under customer's responsibility.
B  Installationandelectricalconnectionsoftheproduct
must be carried out by the Authorized Service Agent.
Manufacturer shall not be held liable for damages that
may arise from procedures carried out by unauthorized
persons.
A Prior to installation, visually check if the product has any
defectsonit.Ifso,donothaveitinstalled.Damaged
products cause risks for your safety.
C Make sure that the water inlet and discharge hoses
as well as the power cable are not folded, pinched or
crushed while pushing the product into its place after
installation or cleaning procedures.
Appropriate installation location
• Placethemachineonarigidfloor.Donotplaceitona
long pile rug or similar surfaces.
• Totalweightofthewashingmachineandthedryer-with
fullload-whentheyareplacedontopofeachother
reachestoapprox.180kilograms.Placetheproduct
on a solid and flat floor that has sufficient load carrying
capacity!
• Donotplacetheproductonthepowercable.
• Donotinstalltheproductatplaceswheretemperature
mayfallbelow0ºC.
• Placetheproductatleast1cmawayfromtheedgesof
other furniture.
3EN
Removing packaging reinforcement
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging reinforcement by
pulling the ribbon.
Removing the transportation locks
A  Donotremovethetransportationlocksbeforetaking
out the packaging reinforcement.
A Remove the transportation safety bolts before operating
the washing machine, otherwise, the product will be
damaged.
1. Loosenalltheboltswithaspanneruntiltheyrotate
freely (C).
2. Remove transportation safety bolts by turning them
gently.
3. AttachtheplasticcoverssuppliedintheUserManual
bag into the holes on the rear panel. (P)
C  Keepthetransportationsafetyboltsinasafeplaceto
reuse when the washing machine needs to be moved
again in the future.
C Never move the product without the transportation
safety bolts properly fixed in place!
Connecting water supply
C  Thewatersupplypressurerequiredtoruntheproduct
isbetween1to10bars(0.1–10MPa).Itisnecessary
tohave10–80litersofwaterflowingfromthefully
open tap in one minute to have your machine run
smoothly. Attach a pressure reducing valve if water
pressure is higher.
C  Ifyouaregoingtousethedoublewater-inletproduct
asasingle(cold)water-inletunit,youmustinstallthe
supplied stopper to the hot water valve before operating
the product. (Applies for the products supplied with a
blind stopper group.)
C  Ifyouwanttousebothwaterinletsoftheproduct,
connect the hot water hose after removing the stopper
and gasket group from the hot water valve. (Applies for
the products supplied with a blind stopper group.)
A Models with a single water inlet should not be
connectedtothehotwatertap.Insuchacasethe
laundry will get damaged or the product will switch to
protection mode and will not operate.
A  Donotuseoldorusedwaterinlethosesonthenew
product.Itmaycausestainsonyourlaundry.
1. Connectthespecialhosessuppliedwiththeproductto
thewaterinletsontheproduct.Redhose(left)(max.90
ºC)isforhotwaterinlet,bluehose(right)(max.25ºC)is
for cold water inlet.
A Ensure that the cold and hot water connections are
made correctly when installing the product. Otherwise,
your laundry will come out hot at the end of the washing
process and wear out.
2. Tighten all hose nuts by hand. Never use a wrench
when tightening the nuts.
3. Open the taps completely after making the hose
connection to check for water leaks at the connection
points.Ifanyleaksoccur,turnoffthetapandremove
the nut. Retighten the nut carefully after checking the
seal. To prevent water leakages and damages caused
by them, keep the taps closed when the machine is not
in use.
Connecting to the drain
• Theendofthedrainhosemustbedirectlyconnectedto
the wastewater drain or to the washbasin.
A Your house will be flooded if the hose comes out of
its housing during water discharge. Moreover, there is
risk of scalding due to high washing temperatures! To
prevent such situations and to ensure smooth water
intake and discharge of the machine, fix the end of the
discharge hose tightly so that it cannot come out.
• Thehoseshouldbeattachedtoaheightofatleast40
cm,and100cmatmost.
• Incasethehoseiselevatedafterlayingitonthefloor
levelorclosetotheground(lessthan40cmabovethe
ground), water discharge becomes more difficult and
the laundry may come out excessively wet. Therefore,
follow the heights described in the figure.


Produktspezifikationen

Marke: Blomberg
Kategorie: Waschmaschine
Modell: WNF 7300 WE20

Brauchst du Hilfe?

Wenn Sie Hilfe mit Blomberg WNF 7300 WE20 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Waschmaschine Blomberg

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung für -Kategorien-