Blaupunkt GTA 475 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Blaupunkt GTA 475 (8 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 39 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
POWER AMPLIFIER
GTA 475
Operating and Installation Instructions
1
General Safety Notes
Observe the following to protect yourself against injuries :
The supply voltage requirement is 12V DC with
grounded negative connection. Unauthorised
dismantling or modifying may void the warranty of the
device. Blaupunkt is not liable for any loss or damaged
caused or resulting from unauthorized reparation or
modification to the device. Refer to a Blaupunkt
specialist in case of any installation or reparation
required.
The device’s core components may be damaged when
the car is driven on bumpy roads for a prolonged period
of time or if it is used to play non-standard volume level.
Please do not operate the car radio under extreme
temperature conditions (extremely high temperature
or extremely low temperature); ensure the temperature
within the car ranges from -10°C to 85°C (Storage
temperature : 5°C to 35°C) before connecting to the
power supply.
For abnormalities, please refer to TROUBLESHOOTING.
Consult a specialist if the problem persist.
Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care products may
contain materials which can damage the surface and
screen of the device. Use only dry or slightly moistened
cloth to clean the device.
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time without
any notice. Visit www.blaupunkt.com for more info.
Proper system planning is vital in order to maximize the
device’s performance and road safety. Plan your
installation carefully to avoid compromising performance
reliability of the system. Consult an authorized Blaupunkt
delaler for installation or reparation. Read the manual
carefully before operating the device for the first time.
Safety Notes
Ensure to follow below safety notes during installation
and wiring connection: -
Disconnect the negative terminal of the battery. Refer
to the safety notes of the vehicle manufacturer.
Ensure positions of the holes are nowhere near the
vehicle component to avoid any damage during
drilling.
Ensure cross section of the cable is no less than
2.5mm2 if the positive and negative cables are too long.
Incorrect installation may result in malfunction of the
device or the car sound system.
Installation and Connection Instructions
Select a dry and well-ventilated location to install the
device.
The device must not be installed in overly exposed
location such on therear shelf, rear seat etc.
The installation location must be suitable for screw
holes and have stable ground support.
Integrated Fuse
The integrated fuse in the device protects the output
voltage and the entire electrical system in case of malfunc-
tion. Do not replace damaged fuse with higher current.
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages to property or life and whatsoever arising out of
or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in
the United States and Canada. If purchased in the U.S. or
Canada, this product is purchased on as-is basis. No
warranty, whether expressed or implied is provided in the
U.S. or Canada.
INTRODUCTION
2
Amplifier Class : Class AB
No of Channel : 4/3/2
No of PCB Layer : 2
Max Total Power : 160W x 4
RMS Power (4 ohms) : 75W x 4
RMS Power (2 ohms) : 120W x 4
Frequency Response : 10Hz - 50kHz
Signal-To-Noise Ratio : ≥ 96dB
Voltage Supply : 11- 16V DC
Idling Current : 0.8A
Gain Adjust : 200mV - 6V
Crossover Type : Variable LPF
Crossover Slope : -12dB/oct
Max Total Power Bridged (4 ohms) : 240W x 2
Crossover Frequency (Low Pass Filter) : 32Hz - 250Hz
Crossover Frequency (High Pass Filter) : 20Hz - 250Hz
Hi-Volt Input Level Control : 3V
Lo-Volt Input Level Control : 200mV - 6V
Total Harmonic Distortion : ≤ 0.05%
RCA Input : 4 Channel
Speaker Input : Yes
Fuse : 40A x 1
Power/Ground Terminal : Screw-Type
Speaker Terminal : Screw-Type
Net Weight : 2.85kg
Dimension (W x H x D) : 260 x 165 x 58.5mm
SPECIFICATION
INPUT FUNCTION
11. POWER
12. PRO/PWR Indicator
13. CH3/CH4 Output
14. CH1/CH2 Output
1. CH3/CH4 Gain Control
2. HPF OFF/ON
3. HPF Control
4. LPF OFF/ON
5. LPF Control
6. CH1/CH2 Gain Control
7. 2CH/4CH Input Mode
8. 4 Channel RCA Input Jack
9. CH3/CH4 High Level Input
10. CH1/CH2 High Level Input
1
2
4 5 6 7
8
9 10
11 12 13 14
3


Produktspezifikationen

Marke: Blaupunkt
Kategorie: Empfänger
Modell: GTA 475

Brauchst du Hilfe?

Wenn Sie Hilfe mit Blaupunkt GTA 475 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Blaupunkt

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-