Black Box LPH008A-R2 Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Black Box LPH008A-R2 (1 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war fĂĽr 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/1
Link eight 10-/100-/1000-Mbps PoE+ devices to
this tough, industrial-grade switch’s RJ-45
ports.
Delivers PoE+ power to remote powered devices, including IP
cameras, Wi-Fi access points, and VoIP phones.
8-Port Hardened Gigabit PoE+ Switch Quick Start Guide
LPH008A
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
call 724-746-5500) FREE technical support 24 hours a day, 7 days a
week: Call 724-746-5500 or fax 724-746-0746 Mailing address:
Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Customer
Support
Information
NOM Statement
724-746-5500 | blackbox.com
LPH008A
Chapter 3: Operation
724-746-5500 | blackbox.com
LPH008A
© Copyright 2014. Black Box Corporation. All rights reserved. Black Box
® and the Double Diamond
logo are registered trademarks of BB Technologies, Inc. UL is a registered trademark of
Underwriters Laboratories. Any third-party trademarks appearing in this manual are acknowledged
to be the property of their respective owners.
FREE! Live, 24/7 Tech Support is just 60 seconds away.
724-746-5500 | blackbox.com
LPH008A, version 1
FCC and IC RFI Statements; Trademarks
Chapter 1: Overview; Chapter 2: Hardware Installation
724-746-5500 | blackbox.com Page 2
LPH008A
1.3 Hardware Description
Figure 1-1 shows the Hardened Gigabit PoE+ Switch’s front panel. Table 1-1
describes its components.
Figure 1-1. Front panel.
Table 1-1. LPH008A components.
Component Description
(2) Power LEDs Link to 10-/100-/1000-Mbps Ethernet devices
(1) Power Fault LED s when power to the switch is onLight
(8) Link/Act. LEDs Lights when the port is operating
(8) Power Injected LEDs Lights when the port is using PoE+
(8) Gigabit LAN ports Link to PoE+ devices
Chapter 2: Hardware Installation
724-746-5500 | blackbox.com Page 3
LPH008A
Chapter 3: Operation
724-746-5500 | blackbox.com Page 4
LPH008A
Chapter 1: Overview
724-746-5500 | blackbox.com Page 1
LPH008A
1. Overview
1.1 Introduction
The Hardened Gigabit PoE+ Switch has eight 10/100/1000BASE-TX RJ-45
Ethernet ports and two Power LEDs. It supports Power over Ethernet, which
transmits electrical power, along with data, to remote devices over standard
twisted-pair cable in an Ethernet network. The switch uses a 5-pin terminal
block power connector.
NOTE: The switch should be mounted on a well-grounded place, such as a
metal panel.
1.2 What’s Included
Your package should include the following items. If anything is missing or dam-
aged, contact Black Box Technical Support at 724-746-5500 or info@blackbox.
com.
• (1) Hardened Gigabit PoE+ Switch
• (1) 5-pin terminal block for power input
• This user’s manual
Optional accessories:
• Wallmount kit (45.4" [2.3 cm] thick)
2. Hardware Installation
Step 1: Installing the Switch on a DIN Rail or Wall
Refer to the illustrations below to mount the switch on a DIN rail or wall.
DIN rail
installation
Wallmount
installation
Figure 2-1. DIN rail or wallmount installation.
Step 2: Connecting the Power
Refer to the illustration below to connect the power to the switch.
Step 3: Connecting the Network Devices
• Connect your devices using standard UTP/STP cable with RJ-45 connectors to the
switch. (For the cable wiring diagrams, refer to the pin assignment in Figure 3-2.)
• The corresponding RJ-45 LED will light if the Ethernet connection is linked
successfully.
• The LED will blink while the switch transfers data.
UL® Notice for Power Supply
Use a power supply marked with “LPS,” “Limited Power Source,” or “Class 2” with
output rate 24–36 VDC (5 A maximum at 24 VDC).
3. Operation
3.1 LED Indicators
LED indicators are located on the front panel of the switch. See Table 1-1.
3.2 Configuration and Setting Methods
No configuration and setting methods are needed.
3.3 Network Connector Pin Assignments
Table 3-2. RJ-45 connector pinout.
Pin
MDI
(1000BASE-T)
MDI
(10/100BASE-T)
1 TP1+ TX+
2 TP1- TX-
3 TP2+ RX+
4 —TP3+
5 —TP3-
6 TP2- RX-
7 —TP4+
8 —TP4-
RJ-45 8-pin straight-through wiring RJ-45 8-pin crossover wiring
Switch PC (NIC) Switch Switch
3 1 ---------------------------- 3 3 ----------------------------
6 2 ---------------------------- 6 6 ----------------------------
1 3 ---------------------------- 1 1 ----------------------------
2 6 ---------------------------- 2 2 ----------------------------
4 7 ---------------------------- 4 4 ----------------------------
5 8 ---------------------------- 5 5 ----------------------------
7 4 ---------------------------- 7 7 ----------------------------
8 5 ---------------------------- 8 8 ----------------------------
Table 3-2. PoE pin definition.
Pin Pin10/100BASE-T(X) PSE RJ-45 port 1000BASE-T PSE RJ-45 port
1 1TD+ with PoE power input + BI_DA+ with PoE power input +
2 2TD- with PoE power input + BI_DA- with PoE power input +
3 3RD+ with PoE power input - BI_DB+ with PoE power input -
6 4RD- with PoE power input - BI_DC+
4 5Not used BI_DC-
5 6Not used BI_DB- with PoE power input
7 7Not used BI_DD+
8 8Not used BI_DD-
FEDERAL COMMUNICATIONS COMMISSION AND
INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used
properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio
communication. It has been tested and found to comply with the limits for a Class A computing device in
accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable
protection against such interference when the equipment is operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference, in which case the user at his own expense will
be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emis sion from digital apparatus set
out in the Radio Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par
Industrie Canada.
Warranty and Return Information
If you determine that your LPH008A is malfunctioning, do not attempt to alter or
repair the unit. It contains no user-serviceable parts. Contact Black Box Technical
Support at 724-746-5500 or info@blackbox.com.
Before you do, make a record of the history of the problem. We will be able to
provide more efficient and accurate assistance if you have a complete description,
including the nature and duration of the problem, when the problem occurs, and
any particular application that, when used, appears to create the problem or make
it worse.
RJ-45
connector
Figure 3-1. RJ-45 connector.
Figure 3-2. RJ-45 straight-through and
crossover wiring diagrams.
24–36 VDC 24–36 VDC
Produktspezifikationen
| Marke: | Black Box |
| Kategorie: | Schalten |
| Modell: | LPH008A-R2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Black Box LPH008A-R2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalten Black Box
4 Oktober 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
9 August 2024
8 August 2024
2 August 2024
Bedienungsanleitung Schalten
- Schalten Asus
- Schalten Belkin
- Schalten Hama
- Schalten HP
- Schalten LogiLink
- Schalten Manhattan
- Schalten Nedis
- Schalten Philips
- Schalten SilverCrest
- Schalten Panasonic
- Schalten Brennenstuhl
- Schalten Clas Ohlson
- Schalten Cotech
- Schalten Profile
- Schalten ZyXEL
- Schalten Bosch
- Schalten Yamaha
- Schalten Powerfix
- Schalten CSL
- Schalten Eminent
- Schalten Linksys
- Schalten Netgear
- Schalten König
- Schalten PCE
- Schalten Renkforce
- Schalten Trotec
- Schalten Schneider
- Schalten Rex
- Schalten Kaiser
- Schalten Vivanco
- Schalten Abus
- Schalten Elro
- Schalten Smartwares
- Schalten Tesla
- Schalten Perel
- Schalten Nexa
- Schalten Tork
- Schalten GEV
- Schalten Goobay
- Schalten Lindy
- Schalten Tripp Lite
- Schalten Ansmann
- Schalten Mercusys
- Schalten Marmitek
- Schalten Honeywell
- Schalten TRENDnet
- Schalten TP-Link
- Schalten Kathrein
- Schalten Flamingo
- Schalten Alcatel
- Schalten Tiptel
- Schalten Alpine
- Schalten Techly
- Schalten Ebode
- Schalten Theben
- Schalten Vacmaster
- Schalten GAO
- Schalten Hager
- Schalten Behringer
- Schalten Omnitronic
- Schalten Monoprice
- Schalten Ecler
- Schalten Monacor
- Schalten Huawei
- Schalten JUNG
- Schalten Victron Energy
- Schalten Ei Electronics
- Schalten Edimax
- Schalten Totolink
- Schalten D-Link
- Schalten Sylvania
- Schalten Audiovox
- Schalten B-Tech
- Schalten QNAP
- Schalten SPC
- Schalten Speaka
- Schalten Digitus
- Schalten Sygonix
- Schalten DataVideo
- Schalten Lancom
- Schalten LevelOne
- Schalten Merten
- Schalten APC
- Schalten Eberle
- Schalten Cisco
- Schalten Delta Dore
- Schalten Grässlin
- Schalten Tenda
- Schalten CyberPower
- Schalten Boss
- Schalten IFM
- Schalten Intertechno
- Schalten Elation
- Schalten Ubiquiti Networks
- Schalten Kramer
- Schalten Aeon Labs
- Schalten Intellinet
- Schalten Eaton
- Schalten AV:link
- Schalten Hikvision
- Schalten Vemer
- Schalten PreSonus
- Schalten Planet
- Schalten EnGenius
- Schalten Finder
- Schalten Mikrotik
- Schalten Shimano
- Schalten Homematic IP
- Schalten Berker
- Schalten Dormakaba
- Schalten Emerson
- Schalten Generac
- Schalten Intermatic
- Schalten KlikaanKlikuit
- Schalten Mercury
- Schalten Paladin
- Schalten Provision ISR
- Schalten Robbe
- Schalten SEC24
- Schalten Steren
- Schalten Suevia
- Schalten AMX
- Schalten Triax
- Schalten WHALE
- Schalten Vimar
- Schalten Cudy
- Schalten Siig
- Schalten Electro Harmonix
- Schalten RGBlink
- Schalten Iogear
- Schalten StarTech.com
- Schalten Smart-AVI
- Schalten Dahua Technology
- Schalten PAC
- Schalten Gefen
- Schalten Avocent
- Schalten Legrand
- Schalten Atlantis Land
- Schalten CYP
- Schalten H-Tronic
- Schalten ATen
- Schalten Axing
- Schalten KanexPro
- Schalten SmartAVI
- Schalten Advantech
- Schalten Kraus & Naimer
- Schalten Chacon
- Schalten Juniper
- Schalten Fibaro
- Schalten Phoenix Contact
- Schalten Audac
- Schalten OSD Audio
- Schalten Wentronic
- Schalten SunBriteTV
- Schalten BZBGear
- Schalten Crestron
- Schalten Kemo
- Schalten ORNO
- Schalten Extron
- Schalten Atlona
- Schalten Equip
- Schalten Heitronic
- Schalten Hamlet
- Schalten STI
- Schalten Matrox
- Schalten Blustream
- Schalten Vivolink
- Schalten Mach Power
- Schalten Ernitec
- Schalten Cambium Networks
- Schalten ConnectPro
- Schalten Micro Connect
- Schalten Intelix
- Schalten ICasa
- Schalten Maclean Energy
- Schalten Cooking Performance Group
- Schalten Flic
- Schalten Liberty
- Schalten Noark
- Schalten 2USB
- Schalten KVM-TEC
- Schalten Setti+
- Schalten PureLink
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
12 Oktober 2024
11 Oktober 2024
8 Oktober 2024
8 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
2 Oktober 2024