Black Box INDRy II S LIG401A Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Black Box INDRy II S LIG401A (2 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war fĂĽr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
Page 5 Page 6
© Copyright 2016. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners.
Quick Start Guide
LIG401A has (4) RJ-45 and (1) SFP ports.
LIE401A has (4) RJ-45 PoE+ and (1) SFP ports.
Industrial Gigabit Ethernet Switches
LIG401A
LIE401A
LIG401A, LIE401A Quick Start Guide
1. What’s Included
Your package should contain the following items. If any-
thing is missing or damaged, contact Black Box Technical
Support at 724-746-5500 or info@blackbox.com.
• (1) Industrial Gigabit Ethernet Switch -
(4) RJ-45, (1) SFP (LIG401A)
OR
(1) Industrial Gigabit Ethernet PoE+ Switch - (4) RJ-45, (1)
SFP (LIE401A)
• (2) wallmount brackets
• (1) DIN-rail clip
• (4) M4 screws (for the wallmount brackets
or DIN-rail clip)
• (1) DC power terminal block
• This Quick Start Guide
2. Overview
The Industrial Gigabit Ethernet Switches support standard
industrial applications without complex setup to make the
network truly plug-and-play.
WARNING! When a connector is removed during
installation, testing, or servicing, or when an
energized fiber is broken, your eyes might be
exposed to to hazardous laser output power.
Mechanical
Connectors LIG401A:
(5) RJ-45, 10/100/1000 Mbps
speed auto-negotiation,
MDI-MDI-X auto-crossover
(1) 100/1000BASE-SFP
module slot;
LIE401A:
(5) RJ-45, IEEE 802.3at
PoE PSE ports,
10/100/1000 Mbps speed
auto-negotiation,
MDI-MDI-X auto-crossover;
(1) 100/1000BASE-SFP
module slot
Ingress protection IP30
Dimensions (without
DIN rail clip)
LIG401A: 4.4”H x 1.1”W x 3.5”D
(11.2 x 2.9 x 8.9 cm);
LIE401A: 5.4”H x 1.1”W x 4.2”D
(13.9 x 2.9 x 10.7 cm)
Weight LIG401A: 0.70 lb. (0.32 kg);
LIE401A: 1 lb. (0.46 kg)
Installation Options DIN-rail mounting;
Wallmounting
Power
PoE LIG401A: No;
LIE401A: Yes
Input Redundant input terminals, reverse power pro-
tection
Input Voltage LIG401A: 12–58 VDC;
LIE401A: 12–58 VDC, 54–58 V
for PoE+, 48–58 V for PoE
Environmental
Operating
Temperature
-40 to +167° F (-40 to +75° C), cold startup at
-40° C
Storage Temperature -40 to +185° F (-40 to +85° C)
Humidity 5 to 95% RH (non-condensing)
Specifications
LED Name Status Condition
PoE
(LIE401A only)
ON, Green PoE is working
OFF PoE is not working
P1 ON, Green P1 power line has power
OFF P1 power line is disconnected
or does not have power
P2 ON, Green P2 power line has power
OFF P2 power line is disconnected
or does not have power
Alarm ON, Red Power failure alarm occurs
OFF No power failure alarm
(4) Link/Act
LEDs for RJ-45
ports
On, Green Ethernet link is up but no
traffic is detected
OFF Ethernet link is down
(4) Speed LEDs
for RJ-45 ports
ON, Yellow 1000-Mbps connection is
detected.
OFF No link, a 10-Mbps or 100-
Mbps connection is detected
(1) Link/Act LED
for SFP port
ON, Green Ethernet link is up
OFF Ethernet link is down
(1) Speed LED
for SFP port
ON, Yellow SFP port speed 1000-Mbps
connection is detected
OFF No link, or an SFP port speed
100-Mbps connection is
detected
LIG401A, LIE401A Quick Start Guide
LED Indicators on the LIE401A and LIG401A
lig401a_lie401a_qsg_rev1
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 724-746-5500 or
fax 724-746-0746
Web site: www.blackbox.com
E-mail: info@blackbox.com
Customer
Support
Information
724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com
LIG401A, LIE401A Quick Start Guide LIG401A, LIE401A Quick Start Guide
Page 3Page 2 Page 4
3. Installation
3.1 Mounting the Switch on a DIN Rail
1. Screw the DIN rail bracket onto the switch with the included
bracket and screws.
2. Hook the switch-DIN-rail-bracket assembly over the DIN rail.
3. Push the bottom of the assembly towards the DIN rail until it
snaps into place.
Figure 3-1. Din-rail mounting.
3.2 Mounting the Switch on a Wall
Screw the wall mount brackets on using the included M4 screws.
Figure 3-2. Wallmounting.
3.3 Connecting to Ground
The switch must be properly grounded for optimum system
performance.
FIgure 3-3. Grounding points on the LIG401A and LIE401A.
3.4 Connecting the Ethernet Interface
3.4.1 Connecting the RJ-45 Electrical Interface
To connect to a PC, use a straight-through or crossover Ethernet cable.
To connect the switch to an Ethernet device, use unshielded
twisted-pair (UTP) or shielded twisted-pair (STP) Ethernet cables.
The RJ-45 connector’s pinout is shown in Table 3-1.
Table 3-1. RJ-45 connector pinout.
Pin Assignment PoE Assignment (LIE401A only)
1, 2 TX/RX+, TX/RX- Positive Vport
3, 6 TX/RX+, TX/RX- Negative Vport
4, 5 TX/RX+, TX/RX- Not used
7, 8 TX/RX+, TX/RX- Not used
3.4.2 Connecting the Fiber SFP Interface
To connect to a fiber port, install a fiber SFP module into the SFP
slot on the switch. Compatible SFP modules are listed in Table 4-2.
DANGER! Do not look directly into the optical beam emitted
from the fiber connectors. Your eyes might be damaged!
Table 3-2. Compatible SFP modules.
Part Number Description
LSP421 10GBASE-SR SFP+ Extended Diagnostics, LC
multimode 850 nm, 300 m
LSP422 10GBASE-LR, SFP+ Extended Diagnostics, LC
single-mode, 1310 nm, 10 km
LFP411 SFP/1250 Extended Diagnostics, LC multimode, 850
nm, 550 m
LFP412 SFP/1250 Extended Diagnostics, LC multimode, 1310
nm, 2 km
LFP413 SFP/1250 Extended Diagnostics, LC
single-mode, 1310 nm, 10 km
LFP414 SFP/1250 Extended Diagnostics, LC
single-mode, 1310 nm, 40 km
LFP401 SFP/155 Extended Diagnostics, LC multimode, 850 nm,
2 km
LFP403 SFP/155 Extended Diagnostics, LC single-mode, 1310
nm, 30 km
LFP404 SFP/155 Extended Diagnostics, LC single-mode, 1310
nm, 60 km
LFP402 SFP/155 Extended Diagnostics, LC multimode, 1310
nm, 2 km
LFP418 SFP/1250 Extended Diagnostics, LC single-mode, 1550
nm, 80 km
LFP420 Simplex SFP/1250, Extended Diagnostics, single-mode,
1550 nm TX, 1310 nm RX
Table 3-2 (continued). Compatible SFP modules.
Part Number Description
LFP421 Simplex SFP/1250, Extended Diagnostics, single-mode,
1310 nm TX, 1550 nm RX
3.5 Connecting the Power
The switch is powered by redundant power supplies. To install,
insert the positive and negative wires into V+ and V- contacts on
the terminal block and tighten the wire-clamp screws to prevent
the wires from loosening.
NOTE: Input power for the LIE401A ranges from 54–58 VDC for
PoE+ and 48–58 VDC for PoE.
3.6 Connecting the Alarm Relay (LIG401A only)
The alarm relay output contacts are in the middle of the DC
terminal block connector as shown in Figure 3-4.
Figure 3-4. Alarm relay output contacts on the LIG401A.
Insert the wires and set the DIP switch of the respective port alarm
to ON. The relay output will detect if a port fails, and form a short
circuit. The alarm relay out is “Normal Open.”
4. DIP Switch Settings
Table 4-1. DIP switch settings on the LIG401A.
DIP Switch Status Description
1 ON
OFF
ON enables the power alarm;
OFF disables the power alarm.
2 ON
OFF
ON enables broadcast storm limit;
OFF disables broadcast storm limit
Table 4-2. DIP switch settings on the LIE401A.
DIP Switch Status Description
1 ON
OFF
ON enables broadcast storm limit
OFF disables broadcast storm limit
2 NOT USED NOT USED
LIG401A, LIE401A Quick Start Guide
LIG401A LIE401A
Produktspezifikationen
| Marke: | Black Box |
| Kategorie: | Schalter |
| Modell: | INDRy II S LIG401A |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Black Box INDRy II S LIG401A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter Black Box
10 Juni 2024
28 Mai 2024
22 Februar 2024
17 Februar 2024
7 Januar 2024
31 Dezember 2023
17 Dezember 2023
10 Dezember 2023
14 September 2023
15 Juni 2023
Bedienungsanleitung Schalter
- Schalter Asus
- Schalter Basetech
- Schalter Belkin
- Schalter Hama
- Schalter HP
- Schalter Manhattan
- Schalter Nedis
- Schalter SilverCrest
- Schalter Brennenstuhl
- Schalter Cotech
- Schalter Profile
- Schalter Quigg
- Schalter ZyXEL
- Schalter Bosch
- Schalter Buffalo
- Schalter Yamaha
- Schalter Velleman
- Schalter Powerfix
- Schalter Linksys
- Schalter Netgear
- Schalter Alecto
- Schalter Gira
- Schalter Renkforce
- Schalter Trotec
- Schalter Schneider
- Schalter Worx
- Schalter Pyle
- Schalter Kaiser
- Schalter Jabra
- Schalter One For All
- Schalter Sennheiser
- Schalter Abus
- Schalter Elro
- Schalter Perel
- Schalter Wago
- Schalter Nexa
- Schalter Tork
- Schalter GEV
- Schalter Goobay
- Schalter Lindy
- Schalter Tripp Lite
- Schalter Ansmann
- Schalter Marmitek
- Schalter Honeywell
- Schalter TRENDnet
- Schalter Globaltronics
- Schalter TP-Link
- Schalter Kathrein
- Schalter Flamingo
- Schalter Techly
- Schalter Theben
- Schalter GAO
- Schalter Kopp
- Schalter Hager
- Schalter Monoprice
- Schalter Monacor
- Schalter Toolcraft
- Schalter Chamberlain
- Schalter Huawei
- Schalter JUNG
- Schalter Ei Electronics
- Schalter Edimax
- Schalter Totolink
- Schalter D-Link
- Schalter QNAP
- Schalter Digitus
- Schalter DataVideo
- Schalter Lancom
- Schalter LevelOne
- Schalter APC
- Schalter Grandstream
- Schalter Grässlin
- Schalter EVE
- Schalter Comet
- Schalter Elektrobock
- Schalter Tenda
- Schalter CyberPower
- Schalter IFM
- Schalter Intertechno
- Schalter Ubiquiti Networks
- Schalter Unify
- Schalter Kramer
- Schalter Intellinet
- Schalter AV:link
- Schalter Hikvision
- Schalter Vemer
- Schalter Planet
- Schalter EnGenius
- Schalter Finder
- Schalter Mikrotik
- Schalter Shimano
- Schalter Homematic IP
- Schalter Heidemann
- Schalter Berker
- Schalter Emerson
- Schalter Intermatic
- Schalter Inverto
- Schalter Mercury
- Schalter Merlin Gerin
- Schalter Paladin
- Schalter Suevia
- Schalter AMX
- Schalter Triax
- Schalter Ubiquiti
- Schalter UPM
- Schalter Adder
- Schalter Vimar
- Schalter Siig
- Schalter Iogear
- Schalter StarTech.com
- Schalter Smart-AVI
- Schalter Shelly
- Schalter Dahua Technology
- Schalter PAC
- Schalter Gefen
- Schalter Avocent
- Schalter Legrand
- Schalter Eltako
- Schalter CYP
- Schalter H-Tronic
- Schalter ATen
- Schalter Noble
- Schalter SmartAVI
- Schalter Rule
- Schalter Kraus & Naimer
- Schalter Chacon
- Schalter Phoenix Contact
- Schalter OSD Audio
- Schalter BZBGear
- Schalter Crestron
- Schalter ORNO
- Schalter Atlona
- Schalter Krone
- Schalter Lightware
- Schalter Roline
- Schalter Wallair
- Schalter Adviti
- Schalter MFA
- Schalter Matrox
- Schalter Blustream
- Schalter Vivolink
- Schalter IB Connect
- Schalter Ernitec
- Schalter Raritan
- Schalter Seuthe
- Schalter Gigahertz Solutions
- Schalter ConnectPro
- Schalter SEADA
- Schalter IPGARD
- Schalter Doepke
- Schalter Micro Connect
- Schalter Epiphan
- Schalter Baco
- Schalter Pizzato Elettrica
- Schalter Upvel
Neueste Bedienungsanleitung fĂĽr -Kategorien-
20 August 2024
12 Juli 2024
11 Juli 2024
9 Juli 2024
8 Juli 2024
5 Juli 2024
4 Juli 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024