Black And Decker VP510T Bedienungsanleitung
Black And Decker
Sander
VP510T
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Black And Decker VP510T (18 Seiten) in der Kategorie Sander. Dieser Bedienungsanleitung war fĂźr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/18
EN G L I S H
1
WARNING: IMPORTANT SAFETY WARNINGS
AND INSTRUCTIONS
TO REDUCE RISK OF INJURY:
⢠Before any use, be sure everyone using this tool reads and understands all
safety instructions and other information contained in this manual.
⢠Save these instructions and review frequently prior to use and in instructing
others.
â˘WARNING: When using electric tools, basic safety precautions should
always be followed to reduce risk of fire, electric shock, and
personal injury, including the following.
READ ALL INSTRUCTIONS
GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL TOOLS
NOTE: Refer to battery and/or charger manual for battery and charger safety and
usage information.
â˘KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
â˘CONSIDER WORK AREA ENVIRONMENT. Keep work area well lit. Do not use
tool in presence of flammable liquids or gases. Motors in these tools normally
spark, and the sparks may ignite the fumes.
â˘GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces. For example; pipes, radiators, ranges, and refrigerator enclosures. Do
not contact any exposed electrical terminals with the tool. Use extreme caution
when drilling, driving or cutting into walls, floors ceilings or other areas or
wherever live electrical wires may be encountered, DO NOT TOUCH ANY
METAL PARTS OF THE TOOL. Hold the tool only by the plastic handle to
prevent electric shock.
â˘KEEP CHILDREN AWAY. Do not permit children and visitors to contact the tool.
All children and visitors should be kept away from work area.
â˘STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or
locked-up place â out of reach of children.
â˘DONâT FORCE TOOL. It will do the job better and safer at the rate for which it
was intended.
â˘USE RIGHT TOOL. Donât force small tool or attachment to do the job of a heavy-
If you have any questions, call 1-800-54-HOW-TO
KEY INFORMATION YOU SHOULD KNOW:
⢠Charge batteries before first use.
â˘Charger may hum; batteries or charger may become warm
while charging (batteries and charger sold separately).
⢠Not for use on drywall or plaster.
⢠Ensure sandpaper is correctly installed before using.
VEA EL ESPAĂOL EN LA CONTRAPORTADA.
POUR LE FRANĂAIS, VOIR LA COUVERTURE ARRIĂRE.
1-800-762-6672
INSTRUCTION
MANUAL
7.2 Volt Cordless Detail
Sander
VP510
SAVE THIS
MANUAL FOR
FUTURE REFERENCE.
If you have any questions,
call 1-800-762-6672
R
INSTRUCTIVO DE OPERACIĂN, CENTROS DE SERVICIO Y PĂLIZA DE
GARANTĂA. ADVERTENCIA: LĂASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
380850/VP510 5/1/02 11:00 AM Page 1
3
Sandpaper
Papier abrasif
Papel de lija
Platen
Plaque
Platina
4
5
Release Buttons
Boutons de dĂŠgagement
Botones de liberaciĂłn
380850/VP510 5/1/02 11:00 AM Page 2
3
duty tool. Donât use tool for purpose not intended â for example â donât use
circular saw for cutting tree limbs or logs.
â˘DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught
in moving parts. Rubber gloves and non-skid footwear are recommended when
working outdoors. Wear protective hair covering to contain long hair.
â˘USE SAFETY GLASSES. Also use face or dust mask if tool operation is dusty.
â˘SECURE WORK. Use clamps or a vise to hold work. Itâs safer than using your
hand and it frees both hands to operate tool.
â˘DONâT OVERREACH. Keep proper footing and balance at all times.
â˘MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories.
Inspect tool periodically and if damaged, have repaired by authorized service
facility only. Keep handles dry, clean, and free from oil and grease.
â˘DISCONNECT/LOCK OFF TOOLS when not in use, before servicing, and when
changing accessories, such as blades, bits, cutters.
â˘REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see
that keys and adjusting wrenches are removed from tool before turning it on.
â˘AVOID UNINTENTIONAL STARTING. Donât carry tool with finger on switch. Be
sure switch is in the off position (lock off if available) when carrying.
â˘STAY ALERT. Watch what you are doing. Use common sense. Do not operate
tool when you are tired or otherwise impaired.
â˘CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that is damaged should be
properly repaired or replaced by an authorized service center unless otherwise
indicated elsewhere in this instruction manual. Have defective switches replaced
by authorized service center. Do not use tool if switch does not turn it on and off.
â˘REPAIRS AND SERVICE. Repairs, maintenance and adjustment should be
performed by authorized service centers or other qualified service organizations,
always using identical replacement parts.
â˘THE USE OF OTHER ACCESSORIES. The use of any other accessory not
recommended for use with this tool could be hazardous.
IMPORTANT SAFETY INSTRUCTIONS (FOR BATTERY AND CHARGER)
WARNING: When using electric tools, basic safety precautions should
always be followed to reduce risk of fire, electric shock, and personal injury,
including the following:
READ ALL INSTRUCTIONS
⢠Do not store or carry battery so that metal objects can contact exposed metal end
shown in Figure 1. For example, do not place battery in aprons, pockets, tool
boxes, drawers etc. with loose nails, screws, keys, etc. without battery cap.
Battery could short circuit causing fire or burns or damage to battery.
⢠Battery caps are provided for use when carrying batteries or while battery is
stored in a pocket, tool box, etc. Remove cap before placing battery in charger or
tool (see Figure 2).
⢠Never attempt to open the battery for any reason. If the housing of the battery
breaks or cracks, immediately discontinue use and do not recharge.
⢠Do not incinerate the batteries. They can explode in a fire. A small leakage of
liquid from the battery cells may occur under extreme usage, charging or
temperature conditions. This does not indicate a failure. However, if the outer
seal is broken and this leakage gets on your skin:
a. Wash quickly with soap and water.
b. Neutralize with a mild acid such as lemon juice or vinegar.
c. If the battery liquid gets in your eyes, flush them with clean water for a minimum
of 10 minutes and seek immediate medical attention.
MEDICAL NOTE: The liquid is a 25-35% solution of potassium hydroxide.
STORAGE &
CARRYING
CAP
STORAGE &
CARRYING
CAP
Battery Cap
Metal End
If you have any questions, call 1-800-54-HOW-TO
EN G L I S H
1
380850/VP510 5/1/02 11:00 AM Page 3
Produktspezifikationen
| Marke: | Black And Decker |
| Kategorie: | Sander |
| Modell: | VP510T |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Black And Decker VP510T benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sander Black And Decker
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
10 September 2024
14 August 2024
12 August 2024
12 August 2024
9 August 2024
8 August 2024
6 August 2024
Bedienungsanleitung Sander
- Sander Makita
- Sander Bosch
- Sander Flex
- Sander Parkside
- Sander Vonroc
- Sander AEG
- Sander Arendo
- Sander Gastroback
- Sander Cocraft
- Sander FERM
- Sander Ryobi
- Sander Skil
- Sander Topcraft
- Sander Trotec
- Sander Hilti
- Sander Bort
- Sander DeWalt
- Sander Einhell
- Sander Elu
- Sander Festool
- Sander Mafell
- Sander Maktec
- Sander Worx
- Sander Tacklife
- Sander Hikoki
- Sander Hitachi
- Sander Hyundai
- Sander Hazet
- Sander Kinzo
- Sander Kress
- Sander Max
- Sander Metabo
- Sander Stanley
- Sander GĂźde
- Sander Power Craft
- Sander Scheppach
- Sander Probuilder
- Sander Workzone
- Sander Biltema
- Sander Meec Tools
- Sander Dremel
- Sander Fieldmann
- Sander King Craft
- Sander Proxxon
- Sander Westfalia
- Sander Dedra
- Sander DURO
- Sander Far Tools
- Sander Silverline
- Sander Holzmann
- Sander Stomer
- Sander Batavia
- Sander Matrix
- Sander Bavaria
- Sander BrĂźder Mannesmann
- Sander Milwaukee
- Sander Toolcraft
- Sander Fein
- Sander Craftsman
- Sander Powerplus
- Sander Rupes
- Sander Alpha Tools
- Sander Toledo
- Sander Ozito
- Sander Ridgid
- Sander Porter-Cable
- Sander VARO
- Sander Duro Pro
- Sander Gamma
- Sander Global
- Sander Protool
- Sander Toolson
- Sander Wagner SprayTech
- Sander Meister Craft
- Sander Truper
- Sander RIKON
- Sander Einhell Bavaria
- Sander Tryton
- Sander FIXIT
- Sander Ribimex
- Sander Black Decker
- Sander Pevec
- Sander Handwerk
- Sander TAURUS Titanium
- Sander Stalco
Neueste Bedienungsanleitung fĂźr -Kategorien-
15 Oktober 2024
8 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
1 Oktober 2024
30 September 2024
22 September 2024
22 September 2024