Black And Decker MFP200 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Black And Decker MFP200 (12 Seiten) in der Kategorie Küchenmaschine. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following.
Read all instructions.
To protect against risk of electrical shock, do not put base, cord, or plug in
water or other liquid.
Close supervision is necessary when any appliance is used by or near
children.
Turn unit off and unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning. To disconnect, grasp plug, and pull
from wall outlet. Never yank on cord.
Avoid contacting moving parts.
Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or is dropped or damaged in any manner. Return the
appliance to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment. Or, call the appropriate toll-free number
listed on the cover of this manual.
The use of attachments not recommended or sold by the appliance
manufacturer may cause fire, electric shock, or injury.
Do not use outdoors.
Do not let cord hang over edge of table or counter or touch hot surfaces.
Keep hands and utensils away from moving blades or Discs while
processing food to prevent the possibility of severe personal injury or
damage to the food processor. A scraper may be used, but it must be used
only when the food processor is not running.
Blades are sharp. Handle carefully.
Be sure to insert or remove Chopping Blade and Slice/Shred Disc by using
hubs to avoid injury.
To avoid injury, never place Chopping Blade or Slice/Shred Disc on Base
without first putting Bowl properly in place. Make sure motor, Disc, and/or
Chopping Blade have stopped completely before removing cover.
Be certain cover is securely locked in place before operating appliance.
Never feed food into Chute by hand. Always use Food Pusher.
Do not attempt to defeat the cover interlock mechanism.
Do not operate this appliance in the presence of explosive and/or flammable
fumes.
This appliance is intended for household use only, not for commercial or
industrial use. Use for anything other than intended will void the warranty.
SAVE THESE INSTRUCTIONS
Séries MFP100-MFP200 Series
SAVE THIS USE AND CARE BOOK
LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO
CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISATION
*
?
?
?
??
U.S.A./CANADA 1-800-231-9786
MEXICO 01-800-714-2499
http://www.applicaconsumerproductsinc.com
MiniProMini Food Processors (English, page 2)
Miniprocesador de alimentos MiniPro(Español, página 9)
Minirobot culinaire (Fran ais, ç à la page 16)
4
Using The Food Processor
IMPORTANT: For your protection this unit has
an Interlock System. When you slip the Bowl
over the post, turn it towards the Base so that
it locks into place. Be sure to turn the Cover
(or Chopping Lid, depending on use) towards
the Lock position so that the Tab locks into
the slot on the Base (A). This unit will not
operate unless the Cover (or Chopping Lid) is
locked into place.
How To Slice Or Shred
1. Slip the Bowl over the center Post and twist
it toward the Base so that the Bowl locks
into place.
2. Carefully grasp the Slice/Shred Disc by the
Hub or its edges with the desired side (Slice or Shred) up, and push it down onto the
top of the Discharge Disc. Slip the Discharge Disc (with Slice/Shred Disc) over the
center Post.
3. Place the Cover with Continuous Flow Chute onto the Bowl and twist it toward the
Base ( ) until you hear it click into place (A). Position a large, low
serving/preparation bowl under the Continuous Flow Chute to catch food and spatter.
Rimless bowls work better than bowls with a lip.
4. Plug the cord into an electrical outlet.
5. Use the Food Guide to help you prepare food for slicing or shredding. Fill the Food
Chute and position the Food Pusher over the food.
6. Push down with a light but steady pressure
on the Food Pusher while pressing the
desired speed: Hi, Low (MFP200) or On
(MFP100) (B), depending on your model.
Press and hold the Pulse position for short
processing tasks, such as slicing a
cucumber. The unit will stop when you
release the Pulse button. Use the Hi, Low,
(MFP200) or On (MFP100) position for
continuous, longer processing tasks, such
as shredding cabbage or carrots.
NOTE: Let the Processor do the work.
Heavy pressure will not speed up operation.
Do not use the Processor continuously for
more than 3 minutes at a time. Occasionally
turn the serving bowl during processing to prevent food build up in the Continuous
Flow Chute that could fall out of the bowl. Be sure the processor and bowl are far
enough back on the counter to prevent bits from falling on the floor.
7. After processing food, turn the unit “offby pressing on the elevated end of the
rocker “lever” so that it will be even with the top of the unit in the “Offposition or
release the Pulse button. Allow the Disc to stop spinning completely before you
remove the Cover with Continuous Flow Chute by turning it toward the ( )
position and lifting it off.
UNLOCK
LOCK
A
B
3
Food Pusher
Cover with Continuous Flow Chute
Slice/Shred Disc with Hub
Discharge Disc
Chopping Lid
Chopping Blade
2-Cup (480 ml) Bowl (MFP200)
112-Cup (360 ml) Bowl (MFP100)
Post
Base
High/Low/Off/Pulse Control (MFP200)
Off/On/Pulse Control (MFP100)
POLARIZED PLUG
This appliance has a polarized plug one blade is wider than the other. To reduce the
risk of electric shock, this plug will fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse it. If it still does not fit, contact an electrician.
Do not attempt to defeat this safety feature by modifying the plug in any way.
ELECTRICAL CORD
The cord length of this appliance was selected to reduce hazards that may occur with a
longer cord. If more cord length is needed, an extension cord with a polarized plug may
be used. It should be rated not less than 10 amperes, 120 Volts, and have Underwriters
Laboratories or appropriate agency-approved listing. When using a longer cord, be sure
it does not drape over a working area or dangle where it could be pulled on or tripped
over. Handle cord carefully for longer life; avoid jerking or straining it at outlet and
appliance connections.
Before First Use
When unpacking the product and removing packing material, handle the Chopping
Blade and Slice/Shred Disc carefully; they are very sharp. Wash all parts except the
Base before first use.
NOTE ABOUT USAGE: Do not attempt to chop ice in this food processor; it will damage
the Bowl and dull the Chopping Blade. This unit will not whip cream, beat egg whites to
a desirable volume, grind coffee beans or spices with a high oil content, or slice/shred
raw meat, marshmallows or soft cheeses.
6
Food Guide
FOOD ATTACHMENT COMMENTS
APPLES Disc, Slicing Side Stack 2 quarters horizontally in chute.
Use moderate pressure.
BANANAS Disc, Slicing Side Peel and cut in half; use light pressure.
CABBAGE Disc, Shredding Side Cut to fit chute; shred into bowl. Add slaw ingredients
(mayo, vinegar, salt, etc.)
CARROTS Disc, Slicing Side Cut into 4 (10.2 cm) lengths and pack in chute,
(Sliced, shredded) alternating thick and thin ends.
Shredding Side Position in chute & shred.
CELERY, CHOPPED Chopping Blade Up to 1 cup cut into 12 (1.27 cm) lengths. Pulse to
Chopping Lid desired texture.
CUCUMBER Disc, Slicing Side Cut to fit chute; use light pressure.
CHEESE, PARMESAN Chopping Blade Cut into 12 (1.27 cm) cubes and pulse up to 12cup
Chopping Lid at a time.
CHEESE, CHEDDAR Disc, Shredding Side Cut chilled cheese to fit chute/shred.
EGGS (HARD COOKED) Chopping Blade Quarter up to 3 eggs and pulse to desired texture. Add
Chopping Lid mayo, salt, and seasoning for egg salad.
NUTS, CHOPPED Chopping Blade Add up to 1 cup; pulse to desired fineness.
Chopping Lid
ONIONS Chopping Blade Quarter or cut large onions into 8 pieces. Add to bowl.
Chopping Lid Pulse. For even, coarse results, only chop 2 quarters
at a time.
BREAD Chopping Blade Use up to 2 slices/broken into pieces. Pulse speed.
Chopping Lid
PARSLEY, OTHER Chopping Blade Add up to 1 cup; pulse to desired fineness.
HERBS Chopping Lid
PEPPERONI Disc, Slicing Side Cut into 4 (10 cm) lengths. Slice 1 piece at a time
using firm pressure.
POTATOES Disc, Shredding Side Cut to fit chute. After shredding, place in cold water
to prevent darkening before frying.
SQUASH (SHREDDED) Disc, Shredding Side Cut to fit chute; shred, salt and drain. Fries well in
butter or oil.
Need Help?
For service, repair, or any questions regarding your appliance, call the appropriate
“ ”800 number on the cover of this book. Do NOT return the product to the place of
purchase. Do NOT mail the product back to the manufacturer nor bring it to a service
center. You may also want to consult the website listed on the cover of this manual.
5
Chopping Blade
The Chopping Blade speeds up many everyday tasks and is designed to chop, crumb,
grind, mince and mix quickly.
1. Slip the Bowl over the center Post and twist it toward the Base to be sure the Bowl
locks into place.
2. Grasp the Chopping Blade by its center hub
and slide it down onto the Post (C).
3. Use the Food Guide to help you prepare food
for chopping/mincing/mixing and crumbing,
then place the food into the Bowl. Place the
Chopping Lid onto the Bowl and twist it toward
the Base until you hear it click into place.
4. Plug the cord into an electrical outlet.
5. Use the continuous On (MFP100), Hi or Low
(MFP200) for longer processing tasks to make
salad dressing, dips, or baby food. Use the
Pulse position for short processing like
chopping nuts or crumbing bread. Hold the
Pulse position for about 2-3 seconds: check results; repeat for desired consistency. It
is better to use several short pulses rather than a single long one unless mixing
ingredients that require longer processing times.
6. After processing food, turn the unit by pressing on the elevated end of theoff
rocker lever Off“ ” so that it will be even with the top of the unit in the “ ” position or
release the Pulse button. Let the Chopping Blade stop spinning before you twist the
Chopping Lid off.
7. Grasp the Chopping Blade by its hub and remove. Unlock the Bowl by twisting it off
the Base. Empty the processed food.
Care and Cleaning
NOTE: Do not attempt to sharpen the cutting edges of the Chopping Blade or the
Reversible Slice/Shred Disc. They are permanently sharpened at the factory and will be
ruined by attempted sharpening.
Cleaning
1. Before cleaning, be sure the unit is Off and unplugged.
2. Rinse parts immediately after processing for easy cleanup. Removable parts can be
washed by hand or in a dishwasher, top rack.
If washing by hand, use warm soapy water, rinse, and dry thoroughly. If necessary,
use a small bristle brush to thoroughly clean the Bowl, Cover with Continuous Flow
Chute, Chopping Blade, and Slice/Shred Disc.
In a dishwasher, place removable parts on the top rack only not in or near the
utensil basket.
3. Wipe the Base with a damp sponge or cloth and dry thoroughly. Remove stubborn
spots with a damp cloth and a mild, non-abrasive cleaner. Do not immerse the Base
in liquid.
4. Do not use rough scouring pads, abrasives, or cleansers on any parts.
5. Do not fill the Bowl with boiling water or place any parts in boiling water. Some foods,
such as carrots, may temporarily stain the Bowl. To remove stains, make a paste of 1
tablespoon baking soda and two tablespoons warm water. Apply the paste to the
stains and rub with a cloth. Rinse in sudsy water and dry.
C


Produktspezifikationen

Marke: Black And Decker
Kategorie: Küchenmaschine
Modell: MFP200

Brauchst du Hilfe?

Wenn Sie Hilfe mit Black And Decker MFP200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Küchenmaschine Black And Decker

Bedienungsanleitung Küchenmaschine

Neueste Bedienungsanleitung für -Kategorien-