Black And Decker Matrix BDCMTTS Bedienungsanleitung
Black And Decker
Rasentrimmer
Matrix BDCMTTS
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Black And Decker Matrix BDCMTTS (32 Seiten) in der Kategorie Rasentrimmer. Dieser Bedienungsanleitung war fĂźr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
INSTRUCTION MANUAL
3-3/8â (86MM)
TRIMSAW
ATTACHMENT
Thank you for choosing BLACK+ ! DECKER
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+ DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you canât find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPA OL EN LA CONTRAPORTADA.N
INSTRUCTIVO DE OPERACIĂN, CENTROS DE SERVICIO Y PĂLIZA DE GARANTĂA.
ADVERTENCIA: LĂASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CATALOG NUMBER
BDCMTTS
To register your new product, visit
www.BlackandDecker.com/NewOwner
2
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, îre and/or serious injury.
Save all warnings and instructions for future reference.
WARNING: Read all safety warnings and all instructions provided with
your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using
this attachment. Failure to follow the warnings and instructions may result in
electric shock, îre and/or serious injury.
SPECIFIC SAFETY RULES
a)
DANGER: Keep hands away from cutting area and the blade. Keep your second hand
on auxiliary handle or motor housing. If both hands are holding the saw, they cannot be cut
by the blade.
b) Do not reach underneath the workpiece. The guard cannot protect you from the blade
below the workpiece.
c) Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the
blade teeth should be visible below the workpiece.
d) Never hold piece being cut in your hands or across your leg. Secure the workpiece to
a stable platform. It is important to support the work properly to minimize body exposure,
blade binding, or loss of control.
e) Hold power tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord. Contact with a âliveâ wire will
also make exposed metal parts of the power tool âliveâ and shock the operator.
f) When ripping always use a rip fence or straight edge guide. This improves the accuracy
of cut and reduces the chance of blade binding.
g) Always use blades with correct size and shape (diamond versus round) of arbour holes. Blades
that do not match the mounting hardware of the saw will run eccentrically, causing loss of control.
h) . Never use damaged or incorrect blade washers or bolt The blade washers and bolt
were specially designed for your saw, for optimum performance and safety of operation.
CAUSES AND OPERATOR PREVENTION OF KICKBACK
⢠Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an
uncontrolled saw to lift up and out of the workpiece toward the operator.
⢠When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the
motor reaction drives the unit rapidly back toward the operator.
⢠If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade
can dig into the top surface of the wood causing the blade to climb out of the kerf and jump
back toward the operator.
Kickback is the result of saw misuse and/or incorrect operating procedures or conditions and
can be avoided by taking proper precautions as given below:
a) Maintain a îrm grip with both hands on the saw and position your arms to resist
kickback forces. Position your body to either side of the blade, but not in line with
the blade. Kickback could cause the saw to jump backwards, but kickback forces can be
controlled by the operator, if proper precautions are taken.
b) When blade is binding, or when interrupting a cut for any reason, release the trigger
and hold the saw motionless in the material until the blade comes to a complete
stop. Never attempt to remove the saw from the work or pull the saw backward while
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL: DANGER, WARNING, OR CAUTION. Indicates
May be used in conjunction with other symbols or pictographs.
DANGER: Indicates hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a haz ard ous situation which, if not avoided, could result in minor or
mod er ate injury or property damage.
3
the blade is in motion or kickback may occur. Investigate and take corrective actions to
eliminate the cause of blade binding.
c) When restarting a saw in the workpiece, center the saw blade in the kerf and check
that saw teeth are not engaged into the material. If saw blade is binding, it may walk up
or kickback from the workpiece as the saw is restarted.
d) . Support large panels to minimize the risk of blade pinching and kickback Large
panels tend to sag under their own weight. Supports must be placed under the panel on
both sides, near the line of cut and near the edge of the panel.
e) Do not use dull or damaged blades. Unsharpened or improperly set blades produce
narrow kerf causing excessive friction, blade binding and kickback.
f) Blade depth and bevel adjusting locking levers must be tight and secure before
making cut. If blade adjustment shifts while cutting, it may cause binding and kickback.
g) Use extra caution when sawing into existing walls or other blind areas. The protruding
blade may cut objects that can cause kickback.
LOWER GUARD SAFETY INSTRUCTIONS
a) Check lower guard for proper closing before each use. Do not operate the saw if lower
guard does not move freely and close instantly. Never clamp or tie the lower guard
into the open position. If saw is accidentally dropped, lower guard may be bent. Raise the
lower guard with the retracting handle and make sure it moves freely and does not touch
the blade or any other part, in all angles and depths of cut.
b) Check the operation of the lower guard spring. If the guard and the spring are not
operating properly, they must be serviced before use. Lower guard may operate
sluggishly due to damaged parts, gummy deposits, or a buildup of debris.
c) Lower guard should be retracted manually only for special cuts such as âplunge cutsâ
and âcompound cuts.â Raise lower guard by retracting handle and as soon as blade
enters the material, the lower guard must be released. For all other sawing, the lower guard
should operate automatically.
d) Always observe that the lower guard is covering the blade before placing saw down
on bench or îoor. An unprotected, coasting blade will cause the saw to walk backwards,
cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch
is released.
ADDITIONAL SAFETY INSTRUCTIONS
⢠Use clamps or another practical way to secure and support the workpiece to a stable
platform. Holding the work by hand or against your body leaves it unstable and may lead to loss
of control.
⢠Keep your body positioned to either side of the blade, but not in line with the saw
blade. KICKBACK could cause the saw to jump backwards (see Causes and Operator
Prevention of Kickback and KICKBACK).
⢠Avoid cutting nails. Inspect for and remove all nails from lumber before cutting.
⢠Always make sure nothing interferes with the movement of the lower blade guard.
⢠Accessories must be rated for at least the speed recommended on the tool warning
label. Wheels and other accessories running over rated speed can îy apart and cause
injury. Accessory ratings must always be above tool speed as shown on tool nameplate.
⢠Always make sure the saw is clean before using.
⢠Stop using this saw and have it properly serviced if any unusual noise or abnormal operation
occurs.
⢠Always be sure all components are mounted properly and securely before using tool.
⢠Always handle the saw blade with care when mounting or removing it or when removing the
diamond knockout.
⢠Always wait until the motor has reached full speed before starting a cut.
⢠Always keep handles dry, clean and free of oil and grease. Hold the tool îrmly with both
hands when in use.
⢠Always be alert at all times, especially during repetitive, monotonous operations. Always be
sure of position of your hands relative to the blade.
⢠Stay clear of end pieces that may fall after cutting off. They may be hot, sharp and/or heavy.
Serious personal injury may result.
⢠Replace or repair damaged cords. Make sure your extension cord is in good condition. Use
only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole receptacles
that accept the toolâs plug.
⢠An extension cord must have adequate wire size (AWG or American Wire Gauge) for
safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that
Produktspezifikationen
| Marke: | Black And Decker |
| Kategorie: | Rasentrimmer |
| Modell: | Matrix BDCMTTS |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Black And Decker Matrix BDCMTTS benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Rasentrimmer Black And Decker
16 Oktober 2024
11 September 2024
9 September 2024
17 August 2024
17 August 2024
15 August 2024
8 August 2024
5 August 2024
5 August 2024
4 August 2024
Bedienungsanleitung Rasentrimmer
- Rasentrimmer Medion
- Rasentrimmer Philips
- Rasentrimmer Cotech
- Rasentrimmer Makita
- Rasentrimmer Adler
- Rasentrimmer Camry
- Rasentrimmer Bosch
- Rasentrimmer Parkside
- Rasentrimmer Vonroc
- Rasentrimmer OK
- Rasentrimmer Cocraft
- Rasentrimmer FERM
- Rasentrimmer Ryobi
- Rasentrimmer Skil
- Rasentrimmer Topcraft
- Rasentrimmer Braun
- Rasentrimmer Alpina
- Rasentrimmer DeWalt
- Rasentrimmer Einhell
- Rasentrimmer Worx
- Rasentrimmer Pyle
- Rasentrimmer GAM
- Rasentrimmer MACH
- Rasentrimmer Olympia
- Rasentrimmer Hikoki
- Rasentrimmer Hitachi
- Rasentrimmer Hyundai
- Rasentrimmer Fuxtec
- Rasentrimmer Kress
- Rasentrimmer Kärcher
- Rasentrimmer Atika
- Rasentrimmer GĂźde
- Rasentrimmer Levita
- Rasentrimmer LĂźmme
- Rasentrimmer Meec Tools
- Rasentrimmer Fieldmann
- Rasentrimmer BaByliss
- Rasentrimmer Remington
- Rasentrimmer Husqvarna
- Rasentrimmer Stihl
- Rasentrimmer Graphite
- Rasentrimmer Pattfield
- Rasentrimmer Snow Joe
- Rasentrimmer Honda
- Rasentrimmer Silverline
- Rasentrimmer Florabest
- Rasentrimmer Germania
- Rasentrimmer Grouw
- Rasentrimmer Hecht
- Rasentrimmer Stiga
- Rasentrimmer Greenworks
- Rasentrimmer Robust
- Rasentrimmer Batavia
- Rasentrimmer Dolmar
- Rasentrimmer Milwaukee
- Rasentrimmer Toolcraft
- Rasentrimmer AL-KO
- Rasentrimmer EGO
- Rasentrimmer Gardena
- Rasentrimmer CMI
- Rasentrimmer Royal Sovereign
- Rasentrimmer Innoliving
- Rasentrimmer HSM
- Rasentrimmer Verto
- Rasentrimmer Wolf Garten
- Rasentrimmer Craftsman
- Rasentrimmer Defort
- Rasentrimmer Powerplus
- Rasentrimmer SereneLife
- Rasentrimmer Echo
- Rasentrimmer McCulloch
- Rasentrimmer Ozito
- Rasentrimmer Sun Joe
- Rasentrimmer Draper
- Rasentrimmer Solo
- Rasentrimmer Texas
- Rasentrimmer VARO
- Rasentrimmer Spear & Jackson
- Rasentrimmer Efco
- Rasentrimmer ELECTROLUX FLYMO PARTNER McCULLOCH
- Rasentrimmer ELECTROLUX McCULLOCH
- Rasentrimmer Eurogarden
- Rasentrimmer Ferrex
- Rasentrimmer Fiskars
- Rasentrimmer Fleurelle
- Rasentrimmer Flymo
- Rasentrimmer Gamma
- Rasentrimmer Garden Feelings
- Rasentrimmer Gardenline
- Rasentrimmer Gardol
- Rasentrimmer Goon
- Rasentrimmer Grizzly
- Rasentrimmer HammerSmith
- Rasentrimmer Lux Tools
- Rasentrimmer Mac Allister
- Rasentrimmer McGregor
- Rasentrimmer Mr Gardener
- Rasentrimmer MTD
- Rasentrimmer Partner
- Rasentrimmer Plantiflor
- Rasentrimmer Qualcast
- Rasentrimmer Shindaiwa
- Rasentrimmer Sterwins
- Rasentrimmer Tanaka
- Rasentrimmer Top Garden
- Rasentrimmer Toro
- Rasentrimmer Troy-Bilt
- Rasentrimmer Wingart
- Rasentrimmer Powerworks
- Rasentrimmer Sovereign
- Rasentrimmer Challenge
- Rasentrimmer Truper
- Rasentrimmer Palmera
- Rasentrimmer MacAllister
- Rasentrimmer Jonsered
- Rasentrimmer G-Technology
- Rasentrimmer Gute Wahl
- Rasentrimmer Proviel
- Rasentrimmer Budget
- Rasentrimmer Anova
- Rasentrimmer Yellow Garden Line
- Rasentrimmer LawnMaster
- Rasentrimmer Ergotools Pattfield
- Rasentrimmer IKRA
- Rasentrimmer Bestgreen
- Rasentrimmer Central Park
- Rasentrimmer Krausmann
- Rasentrimmer Maruyama
- Rasentrimmer Maxbear
Neueste Bedienungsanleitung fĂźr -Kategorien-
14 Oktober 2024
14 Oktober 2024
12 Oktober 2024
11 Oktober 2024
10 Oktober 2024
1 Oktober 2024
1 Oktober 2024
24 September 2024
23 September 2024
20 September 2024