Black And Decker CS100 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Black And Decker CS100 (7 Seiten) in der Kategorie LaubblĂ€ser. Dieser Bedienungsanleitung war fĂŒr 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
2
3
Use appropriate tool
The intended use is described in this instruction manual.
Do not force small tools or attachments to do the job of a
heavy-duty tool. The tool will do the job better and safer at the
rate for which it was intended. Do not force the tool.
Warning! The use of any accessory or attachment or
performance of any operation with this tool other than those
recommended in this instruction manual may present a risk of
personal injury.
Check for damaged parts
Before use, carefully check the tool for damage. Check for
misalignment and seizure of moving parts, breakage of parts,
damage to guards and switches and any other conditions that
may affect its operation. Ensure that the tool will operate
properly and perform its intended function. Do not use the tool
if any part is damaged or defective. Do not use the tool if the
switch does not turn it on and off. Have any damaged or
defective parts repaired or replaced by an authorised repair
agent. Never attempt any repairs yourself.
Remove the battery
Where the design permits, remove the battery when the tool
is not in use, before changing any parts of the tool,
accessories or attachments and before servicing.
Avoid unintentional starting
Do not carry the tool with a ïŹnger on the on/off switch.
Be sure that the tool is switched off when inserting the battery
into the tool.
Do not abuse cord
Never carry the charger by its cord or pull it to disconnect from
the socket. eep the co d a ay fK r w rom heat, oil and sha p edgesr .
Store idle tools
When not in use, tools, batteries and chargers should be
sto ed in a dr ry, locked up o high place, out of each of child enr r r .
Maintain tools with care
Keep cutting tools sharp and clean for better and safer
performance. Follow the instructions for maintenance and
changing accessories. Keep handles and switches dry, clean
and free from oil and grease.
Repairs
This tool complies with relevant safety requirements. Repairs
should only be carried out by quali ed persons using original ïŹ
spare parts; otherwise this may result in considerable danger
to the user.
Additional safety instructions for Australia and
New Zealand.
Intended use
Your Black & Decker cordless blower has been designed for
blowing leaves and debris. This tool is intended for consumer
and outdoor use only.
Your Black & Decker charger has been designed for charging
Black & Decker batteries of the type supplied with this tool.
Safety instructions
 Warning! When using battery-powered tools, basic safety
precautions, including the following, should always be
followed to reduce the risk of re, leaking batteries, ïŹ
personal injury and material damage.
 Read all of this manual carefully before operating the tool.
 Retain this manual for future reference.
Keep work area clean
Cluttered areas and benches can cause accidents.
Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp or
wet conditions. Keep the work area well lit. Do not use the tool
where there is a risk of causing re or explosion, e.g. in the ïŹ
presence of ïŹ‚ammable liquids and gases.
Keep children away
Do not allow children, visitors or animals to come near the
work area or to touch the tool.
Dress properly
Do not wear loose clothing or jewellery, as these can be
caught in moving parts. Preferably wear rubber gloves and
non-slip footwear when working outdoors. Wear protective
hair covering to keep long hair out of the way.
Personal protection
Always use safety glasses. Use a face or dust mask whenever
the operations may produce dust or ying particles. ïŹ‚
Hearing protection should be worn.
Do not overreach
Keep proper footing and balance at all times.
Stay alert
Watch hat you a e doing. se common sense. o not opew r U D rate
the tool when you are tired.
Secure workpiece
Use clamps or a vice to hold the workpiece. It is safer and it
frees both hands to operate the tool.
Connect dust extraction equipment
If devices are provided for the connection of dust extraction
and collection facilities, ensure that these are connected and
properly used.
Remove adjusting keys and wrenches
Always check that adjusting keys and wrenches are removed
from the tool before operating the tool.
Young children and the infirm. This appliance is not
intended for use by young child en or infirm persons withoutr
supervision. Young children should be supervised to ensure
that they do not play with this appliance.


Produktspezifikationen

Marke: Black And Decker
Kategorie: LaubblÀser
Modell: CS100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Black And Decker CS100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung LaubblÀser Black And Decker

Bedienungsanleitung LaubblÀser

Neueste Bedienungsanleitung fĂŒr -Kategorien-