Binatone Icarus 2020 Bedienungsanleitung

Binatone Telefon Icarus 2020

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Binatone Icarus 2020 (2 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING

EMERGENCY TELEPHONE CALLS WHEN THE POWER

FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE

MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,

please read these instructions carefully.

USER GUIDE

Digital Cordless Telephone CLEANING AND CARE

Do not clean any part of your Icarus 2020 system with benzene, thinner or

other solvent chemicals this may cause permanent damage which is not

covered by the Guarantee.

When necessary, clean it with a damp cloth.

Keep your hot, humid conditions or strong

sunlight, don't let it get wet.and

Every effort has been made to ensure high standards of reliability for your

However, if something does go wrong, please

try to repair it yourself consult your supplier or the Helpline.

do not

Icarus 2020 system away from

Icarus 2020 system

GUARANTEE AND SERVICE

The

purchase shown on your sales receipt. This guaranteed o e s n o t c o v e r a n y

fa u lts or defects caused by accidents,misuse, fair wear and tear, neglect,

faults on the telephone line, lightning, tampering with the equipment, or any

attempt at adjustment or repair other than through approved agents.

Please keep your sales (till) receipt this is your guarantee.

You should also keep the original packaging material.

In the unlikely event that you need to return your

Repair Centre while it is under guarantee, there will be a 5 handling charge.

While the unit is under Guarantee

1. Disconnect the base unit from the telephone line and the mains electricity

supply.

2. Pack up all parts of your

3. Return the unit to the shop where you bought it, making sure you take your

sales receipt.

After the Guarantee has expired

Remember to include the mains adapter.

3. Call Helpline on 0845 345 9677 (for UK only) and ask for a quotation of the

repair charge and details of where to send your I rus 2020 system for repair.

4. Make sure you include with your

5 Return your

If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair

under Guarantee. Then...

¾Your name and address

¾A cheque or postal order for the value of the repair

* This do e s n o t a ffect your sta tutory rights.

Department.

Icarus 2020 system is guaranteed for 12 months from the date of

Icarus 2020 system to our

Icarus 2020 system.

Icarus 2020 system to the address given by the Service

Icarus 2020 system , using the original packaging.

TABLE OF CONTENTS

1 IMPORTANT SAFETY INSTRUCTIONS...........................................................4

2 INSTALLING YOUR PHONE ............................................................................5

2.1 CONNECTING THE BASE STATION .......................................................................... 5

2.2 INSTALLING AND CHARGING THE BATTERIES...................................................... 5

3 GETTING TO KNOW YOUR PHONE ................................................................6

3.1 H OANDSET VERVIEW ................................................................................................ 6

3.2 B SASE TATION ...

3. D I SISPLAY CONS AND YMBOLS............................................................................... 8

3. MENU STRUCTURE ....................................................................................................

3. T EXT AND D E TIGIT NTRY ABLE................................................................................ 9

3.5.1 HARACTER SET ......................................................................................... 10

4 USING YOUR PHONE ......................................................................................1

4.1 M CAKE A ALL ............................................................................................................. 1

4.1.1 P DREPARATORY IALING .........................................................................................1

4.1.2 D DIRECT IALING ....................................................................................................... 1

4.1.3 CALL FROM THE PHONEBOOK ............................................................................... 1 1

4.1.4 C C LALL FROM THE ALL IST..................................................................................... 1

4.1.5 CALL FROM THE REDIAL LIST(ONLY AVAILABLE WITH CALLER DISPLAY) ...... 1

4.1.6 CALL TIMER .............................................................................................................. 1

4.2 A CNSWER A ALL ....................................................................................................... 1

4.3 E CND A ALL ................................................................................................................ 1

4.4 A E VDJUST ARPIECE OLUME .................................................................................... 1

4.5 M CUTE A ALL .............................................................................................................1

4.6 S S MET THE ILENT ODE .............................................................................................1

4.7 T K LURN ON THE EYPAD OCK...................................................................................1

4.8 REDIAL THE LAST NUMBER .....................................................................................1

4.8.1 R N R LEDIAL A UMBER FROM THE EDIAL IST.........................................................1

4.8.2 S R N PTORE A EDIAL UMBER INTO THE HONEBOOK............................................1

4.8.3 D R NELETE A EDIAL UMBER ....................................................................................1

4.8.4 D E R LELETE THE NTIRE EDIAL IST .........................................................................1

4.9 HANDSET................................................................................................... 1

4.10 M I CAKE AN NTERNAL ALL(FOR MULTI-HANDSET VERSIONS ONLY )................ . 1

4.10.1 I A HNTERCOM NOTHER ANDSET ..........................................................................1

4.10.2 C A HALL LL ANDSETS ............................................................................................. 1

4.10.3 T E CRANSFER AN XTERNAL ALL TO ANOTHER HANDSET ................................1

4.10.4 M C CAKE A 3-WAY ONFERENCE ALL ....................................................................1

5 PRIVATE PHONEBOOK..................................................................................1

5.3 V P EIEW A HONEBOOK NTRY ..................................................................................17

5.4 E P EDIT A HONEBOOK NTRY ................................................................................... 17

5.5 D P EELETE A HONEBOOK NTRY ............................................................................. 17

5.6 D E P PELETE THE NTIRE RIVATE HONEBOOK ....................................................... 17

5.7 C P UHECK THE HONEBOOK SAGE .........................................................................17

6 CALLER DISPLAY (NETWORK DEPENDENT)..............................................1

6.1 V C LIEW THE ALL IST ................................................................................................ 18

6.2 S C L N PTORE A ALL IST UMBER INTO THE HONEBOOK....................................... 18

6.3 D C LELETE AN ENTRY IN THE ALL IST ................................................................... 19

6.4 D C LELETE THE ENTIRE LIST OF THE ALL IST ...................................................... 19

6.5 V D C L EIEW THE ETAILS OF THE ALL IST NTRY ....................................................19

7 PHONE SETTINGS ..........................................................................................19

7.1 D T SATE AND IME ETTINGS ..................................................................................... 19

7.1.1 C D FHANGE THE ATE ORMAT ................................................................................19

7.1.2 C T FHANGE THE IME ORMAT ................................................................................. 19

7.1.3 S TET THE IME.......................................................................................................... 19

7.1.4 S DET THE ATE ......................................................................................................... 20

7.2 A SLARM ETTINGS.....................................................................................................

7.2.1 T / AURN ON OFF THE LARM .................................................................................... 20

7.2.2 S A TET THE LARM IME ............................................................................................ 21

7.3 H SANDSET ETTINGS ................................................................................................

7.3.1 S R R I CET THE INGER INGTONE FOR NTERNAL ALLS ........................................

7.3.2 S R MELODY E CET THE INGER FOR XTERNAL ALLS ...........................................

7.3.3 S R VET THE INGER OLUME ....................................................................................

7.3.4 S A TET LERT ONES..................................................................................................

7.3.5 S H LET THE ANDSET ANGUAGE ............................................................................

7.3.6 R HENAME THE ANDSET .........................................................................................

7.3.7 C I D IHOOSE THE NFORMATION TO BE ISPLAYED IN DLE ..................................

7.3.8 S A AET THE UTO NSWER .......................................................................................

7.4 B SASE ETTINGS ....................................................................................................... 22

5.1 A N P EDD A EW HONEBOOK NTRY .......................................................................... 15

5.2 S P EEARCH A HONEBOOK NTRY............................................................................. 15

8 ANSWERING MACHINE ................................................................................ 25

8.1 T O A MURN N/OFF THE NSWERING ACHINE .......................................................... 25

8.2 L M A MISTEN TO THE ESSAGES IN THE NSWERING ACHINE ............................. 26

8.3 D A M A MELETE LL ESSAGES IN THE NSWERING ACHINE ...................................27

8.4 R M 27ECORD EMO ........................................................................................................

8.5 A M SNSWERING ACHINE ETTINGS ......................................................................... 2

8.5.1 S A MET THE NSWER ODE ...................................................................................... 28

8.5.2 S O M L D )ET THE UTGOING ESSAGE (OGM) ANGUAGE (COUNTRY EPENDENT

................................................................................................................................. 28

8.5.3 R Y O O MECORD OUR WN UTGOING ESSAGE (OGM) ......................................... 28

8.5.4 P D O MLAYBACK AND ELETE THE UTGOING ESSAGE (OGM) ........................... 30

8.5.5 S A DET THE NSWER ELAY ..................................................................................... 30

8.5.6 S R T I MET THE ECORDING IME OF NCOMING ESSAGE ......................................

8.5.7 ..................................................................................................

8.5.8 C C RHANGE THE OMPRESSION ATE .................................................................... 31

8.5.9 A R ACTIVATE EMOTE CCESS ................................................................................ 31

TROUBLESHOOTING ..................................................................................3

DECLARATION OF CONFORMITY . ............................................................ 3

CALL SCREENING

3.5.

2PHLISH CHARACTER SET......................................................................................

NORWEGIAN CHARACTER SET............................................................................ 10

3.5. 11 4GREEK CHARACTER SET .....................................................................................

LATIN C

7.4. DE-REGISTER A HANDSET .................................................................................... 23

7.4. CHANGE THE DIAL MODE ......................................................................................

7.4. CHANGE THE F TLASH (RECALL) IME ....................................................................

7.4. C S CHANGE THE YSTEM PIN ODE ........................................................................ 24

7.5 REGISTRATION ......................................................................................................... 24

7.6 R Y PESET OUR HONE ............................................................................................... 25

FIND THE

1 IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of fire, electric shock and injury, including the

1) Read and understand all the instructions.

2) Follow all warnings and instructions marked on the product.

3) Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4) Do not use this product near water (for example, near a bath tub, kitchen

sink, swimming pool).

5) Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

6) Unplug this product from the wall outlet and refer servicing to our Repair

• When the power supply cord or plug is damaged or frayed.

• If the product does not operate normally by following the operating instructions.

• If the product has been dropped and the cabinet has been damaged.

• If the product exhibits a distinct change in performance.

7) Unless it is an emergency, avoid using the telephone during an electrical

storm.There may be a remote risk of electric shock from lightning.

8) Do not use the telephone to report a gas leak in the vicinity of the leak.

9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation

periods for the handsets are only applicable with the default battery capacities

10) The use of other battery types or non-rechargeable batteries/primary cells

can be dangerous. These may cause interference and/or damage to the unit

or surroundings. The manufacturer will not be held liable for damage arising

from such non-compliance.

11) Do not use third party charging bays. Damage may be caused to the batteries.

12) Please ensure the batteries are inserted in the correct polarity.

13) Dispose of batteries safely. Do not immerse them in water, burn them, or put

Package contents

The package contains the following items:

Single

• 1 Handset

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 2 rechargeable batteries

• 1 User manual

Twin

• 2 Handsets

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 4 rechargeable batteries

• 1 User manual

• 1 Charger pod with a connected

mains power adapter

them where they could get punctured.

Centre under the following conditions:

following:

3.2 Base Station with Telephone Answering Machine (TAM) Control

1. PAGE

Press the Page on the base station to page your

2. CHARGING CRADLE

3. CHARGING LED

Steadily on while the handset is charging.

4. TAM ON/OFF

Press to turn on the answering machine.

Press again to turn off the answering machine.

5. PLAY/STOP

Press to play the message

Press to stop the message playback

SKIP BACKWARD

Press to repeat playing the current message from the beginning.

Press twice to skip

SKIP FORWARD

Press to skip the current message and play the next message

VOLUME UP (+)

Increase (+) speaker volume during message playback

VOLUME DOWN (-)

Decrease (-) speaker volume during message playback

10. DELETE

Press once to delete the message during playback

Press and hold to delete all the messages

Note: New voice messages will not be deleted.

handset. It will ring for approximately

11. 7-SEG LED DISPLAY

- - When answering machine is OFF

00 Steadily ON: No voice messages in TAM

XX Flash: There are XX new voice messages received where XX is

from 01 to 59

Steadily ON: Playing the current XX incoming message

XX/FF Flashing XX alternatively with FF: There are XX new voice

messages received where XX is from 01 to 59 and the TAM

memory is full

Flashing FF only: TAM is full and only old voice messages are kept

in the TAM memory

- - /XX Flashing XX alternatively with - -: Time is not set and there are XX

new voice messages received where XX is from 01 to 59

Flashing – only: Time is not set and there are only old voice

messages in the TAM memory.

YY Steadily ON: There are YY old voice messages (no new voice

messages).

A1/A2 Steadily ON: Playing the current outgoing message (OGM) where

A1,A2 are the OGM of Answer & Record and Answer Only mode

respectively.

XX/An Flashing XX alternatively with An: XX incoming message is now

recording.

LA Flashing: Remote access is in progress

LX Steadily ON: Indicate the current volume level where X is from 1 to 8

3.3 Display Icons and Symbols

The LCD display gives you information on the current status of the telephone.

Scroll up / down the menu items / Phonebook list / Redial list / Call List

Steady when the handset is in range of the base. Flashes when out of

Steady when an intercom call is in progress.

Flashes when there is an incoming internal call.

Indicates a call is in progress on that handset.

Indicates when the telephone answering machine (TAM ) is turned on.

Flashes when new TAM messages are received or the TAM messages

Indicates that the ringer is switched off.

Steady when an alarm is set. Flashes when the alarm is sounding.

Indicates that the keypad is locked.

Indicates when you have a new Voice Mail message.

(This is a Caller Display service and is not usually available from

range of the base or not registered to the base.

UK network providers.)

are full.

Indicates when the battery is fully charged.

Whole icon flashes when the battery performs charging.

Internal block icon flashes when the battery is in final charging stage.

Indicates when the battery needs charging.

Flashes when low battery power level is detected.

(BACK)

(INT)

Indicates when there are more characters or numbers in front of those

Indicates when there are more characters or numbers after those being

Press the MENU/OK key to access the main menu.

Press the MENU/OK key to confirm the current selection.

Indicates new TAM message / new call in TAM message list / call list.

Press the C/MUTE key to start an intercom call.

Press the C/MUTE key to go back to the previous menu level or cancel

Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute

being displayed.

displayed.

the current action.

the microphone during a call.

3.4 Menu Structure

In idle mode, press <MENU/OK> to access the Call List menu. Refer to the

following for the menu structure.

Main

Menu CALL LIST PHONEBOOK

SETTINGS

SETTIN GS REGISTRATION DEFAULT ANS. MACHINE

Sub

Review Call

List Under

a selected

Call List

entry:

ADD TO PB

DELETE

DELETE ALL

DETAILS

Review

phonebook

listUnder a

phonebook

entry:

ADD

VIEW

EDIT

DELETE

DELETE ALL

PB STATUS

BS RINGER

RING VOLUME

DELETE HS

DIAL MODE

FLASH TIME

CHANGE PIN

ALARM

RING SETUP

TONE SETUP

LANGUAGE

RENAME HS

HS DISPLAY

AUTO ANSWER

DATE & TIME

PIN? - - - - MSG PLAYBACK

DELETE ALL

MEMO

TAM ON/OFF

TAM SETTINGS

ANSWER MODE

TAM LANGUAGE

OGM SETTINGS

ANSWER DELAY

RECORD TIME

REMOTE ACC

COMPRESSION

SCREENING

CHANGE

PIN? - - - -

Key Press <MENU> <UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

3.5 Text and Digit Entry Table

The following table shows you where each letter and punctuation character can

be found, by using repeated presses of the alphanumeric keypad. This will be

helpful when storing a name in the

phonebook and renaming your handset.

In editing mode, a cursor is displayed to indicate the current text entry position.

It is positioned at the right of the last character entered.

Writing Tips:

1. Once a character is selected, the cursor will move to the next position after a

short pause.

2. You can move the cursor within the text with the <UP/DOWN> keys to

amend the text entry.

3. Press <C> to delete the last character.

4. Press and hold <C> to delete the entire text string.

3.5.1 Latin Character Set

Key

Press 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th

1 space - 1 1

2 A B C 2 2

3D E F 3 3

4 G H I 4 4

5 J K L 5 5

6 M N O 6 6

7 P Q R S 7 7

8 T U V 8 8

9 W X Y Z 9 9

0 0 0, or P (Pause) if press and hold

** ? / \ ( ) *

# # ‘,-.#

Alphanumeric Editing

(For phonebook name editing and renaming handset )

Number Editing (For phone

number editing,date/time editing)

3.5.

Key Press 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th

1 SP - 1 1

2 A B C 2 2

3 D E F 3 3

4 G H I 4 4

5 J K L 5 5

6 M N O 6 6

7 P Q R S 7 7

8 T U V 8 8

9 W X Y Z 9 9

0 0 0, P (Pause)

# #

Alphanumeric Editing

(For phonebook name editing and renaming handset)

Number Editing (For phone

editing, date/time editing)

Key Press 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th

1 SP - 1 1

3D E F 3 3

4 G H I 4 4

5 J K L 5 5

6 M N O 6 6

7 P Q R S 7 7

8 T U V 8 8

9 W X Y Z 9 9

0 0 0, P (Pause)

# #

Alphanumeric Editing

(For phonebook name editing and renaming handset)

Number Editing (For phone

editing, date/time editing)

2 Polish Character Set

3.5.3 Norwegian Character Set

Key

2 A Æ B C 2

Key

Press 1st 2 nd 3rd 4th 5th 6th 7th 8th 9th 10th

1 SP - 1 1

2 A B 2 2

3E 3 3

4 H I 4 4

5 K 5 5

6 6 6

7 7 7

8 8 8

9 9 9

0 0 0, P (Pause)

# #

Alphanumeric Editing

(For phonebook name editing and renaming handset)

Number Editing (For phone

editing, date/time editing)

Δ Ζ

Λ Μ

Ν Ξ Ο

Π Ρ Σ

Τ Υ Φ

Χ Ψ Ω

3.5.4 Greek Character Set

4 USING YOUR PHONE

4.1 Make a Call

4.1.1 Preparatory Dialing

Enter the phone number and press <TALK ON> / <SPEAKER PHONE> to

connect to the line and dial the number. When entering the number, if you

make a mistake, press <C> to delete digits.

4.1.2 Direct Dialing

Press <TALK ON> / <SPEAKER PHONE> to connect to the line and then

4.1.3 Call from the phonebook

Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to

Press <TALK ON> / <SPEAKER PHONE> to dial out the selected phonebook entry.

(Note: if you enter a wrong digit you cannot correct it with the <C> key.)

Note: You can also access the phonebook by pressing <MENU/OK>, <DOWN>,

<MENU/OK>.

select the desired phonebook entry.

4.1.4 Call from the Call List (only available with Caller Display)

Press <UP> to access the Call List and press <UP/DOWN> to select the desired

Press <TALK ON>/ <SPEAKER PHONE> to dial out the selected Call List entry.

Note: You can also access the Call List by pressing <MENU/OK> twice.

4.1.5 Call from the redial list

Press <DOWN> to access the redial list and press <UP/DOWN> to select the

Note: The alphanumeric keys provide a short-cut to find entries beginning with

the corresponding letters.

Call List entry.

desired redial number.

Press <TALK ON> / <SPEAKER PHONE> to dial out the selected redial number.

Note: You can also access the Redial List by pressing the <REDIAL> key.

enter the phone number.

4.1.6 Call timer

Your handset automatically times the duration of every call.

The call timer is displayed 15 seconds after dialling, and remains on the screen

for 5 seconds after the end of the call.It is shown in hours, minutes and seconds

4.2 Answer a Call

If the handset is not on the charging cradle:

When the phone rings, press <TALK ON> / <SPEAKER PHONE> to answer a call.

Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or

charger will answer the call automatically, and no buttons need to be

format (HH:MM:SS).

pressed.

4.3 End a Call

During a call press <TALK OFF> to end the call.

Put the handset on the base station or charger to end the call.

4.4 Adjust Volume

There are 5 levels (VOLUME 1 to VOLUME 5) to choose the earpiece or

During a call:

Press <UP/DOWN> to select volume 1-5. The current setting is shown.

When you end the call, the setting will remain at the last selected level.

4.5 Mute a Call

You can talk to someone nearby without letting the caller hear you during a call.

During a call:

Press <C> to mute the microphone and “MUTED” will display on the LCD.

Your caller cannot hear you. Press <C> again to unmute the microphone.

4.6 Set the Silent Mode

In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER

OFF”

speakerphone volume.

icon is displayed on the LCD.

Note: The display will still flash the Call icon and show CALL or the Caller Display

number, when there is an incoming call, even if the ringer is turned off.

To turn the ringer back on, press and hold <HASH/#> again.

4.7 Turn on the Keypad Lock

In idle, press and hold <STAR/*> to turn on the keypad lock. The “KEYPAD

4.8 Redial the last number

You can redial any of the 5 last numbers called. If you have stored a name in

the phonebook to go with the number, the name will be displayed instead.

4.8.1 Redial a Number from the Redial List

1. In idle mode, press <DOWN> to access the redial list.

Note: If the redial list entry shows a name, press <Hash/#> to view the number

2. Press <UP/DOWN> to browse the redial list.

3. Press <TALK ON> / <SPEAKER PHONE> to dial to the selected redial number.

Note: If there are no numbers in the redial list, the display shows

“EMPTY ”.

4.8.2 Store a Redial Number into the Phonebook

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select ADD TO PB.

3. Press <OK> and then enter the name you want to use in the phonebook.

4. Press <OK> and then modify the number, if necessary.

5. Press <OK> to show <MELODY 1>.

6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will

be played when browsing the ringtone list. (Note: the selected melody will

7. Press <OK> to confirm, and the entry will be stored.

Note: You can still use <TALK ON> to answer a call when / <SPEAKER PHONE>

To turn the keypad lock off, press and hold <STAR/*> again.

only be played if you subscribe to Caller Display and the incoming number

icon is displayed on the LCD.

The most recent last number will display at the top of the redial list.

of this entry.

matches the stored number.)

4.8.3 Delete a Redial Number

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE.

3. Press <OK> to confirm, and the entry will be deleted.

4.8.4 Delete the Entire Redial List

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE ALL

3. Press <OK> to display <CONFIRM?>.

4. Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

LOCK”

the handset is ringing.

4.9 Find the Handset

You can locate the handset by pressing <PAGE> on the base station. All the

handsets registered to the base will produce the paging tone and show

<TALK OFF> /<C> on any handset or <PAGE> on the base again.

Note: If there is an incoming call during paging, the phone will ring with the

4.10 Make an Internal Call (For Multi-handset Versions Only)

This feature is only applicable when there are at least two registered handsets

It allows you to make internal calls, transfer external calls from one handset to

incoming call instead of paging.

"PAGING" on the display. You can stop the paging by pressing <TALKON>/

another handset and make conference calls. If the called handset is not in

answered with 60 seconds, the called handset will stop ringing and the calling

Note: If only one handset is registered to the base station, when <C/MUTE/INT>

is pressed, it will display “NOT POSSIBLE”

4.10.1 Intercom Another Handset

1. In idle mode, press <C/MUTE/INT> and all the other registered handset

2. Enter the number of the handset that you want to call, or enter "9" to call all

3. The called handset rings and <TALK ON> / <SPEAKER PHONE> must be

Note: If only two handsets are registered to the base station, pressing

<C/MUTE/INT> will call the other handset immediately.

numbers will display, along with a "9".

to establish the intercom call.

4.10.3 Transfer an External Call to another handset

During an external call:

1. Press <MENU> and <UP/DOWN> to select INTERCOM

2. Press <OK> to show all the other registered handset numbers, plus "9".

3. The external call is put on hold automatically and the called handset rings

4. Press <TALK ON> / <SPEAKER PHONE> on the called handset to establish

Enter the number for the handset you want to transfer the call to.

handset will return to standby mode.

handsets.

5. Press <TALK OFF> on the calling handset or put the calling handset on the

charging cradle to end the current call with the external party.

6. The external call is transferred to the called handset.

4.10.2 Call All Handsets

1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.

2. Press <KEY 9> to ring to all registered handsets

pressed on that handset

an internal call. the

4.10.4 Make a 3-way Conference Call

The conference call feature allows one external call to be shared with two

handsets (in intercom).

The three parties can share the conversation and no additional network

subscription is required.

During an external call:

1. Follow Steps 1 to 4 in section 4.10.3.

2. Press and hold <STAR> on the calling handset to establish the conference call

Either handset can exit the conference by pressing <TALK OFF>, leaving the

other handset still connected to the external call.

5 PRIVATE PHONEBOOK

Each handset can store up to 20 private phonebook entries with names and

numbers. Each phonebook entry can have a maximum of 20 digits for the

phone number and 12 characters for the name. You can also select different

ringtones for your phonebook entries. (Note: the different ringtones only play if

5.1 Add a New Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

Press <MENU> and <UP/DOWN> to select PHONEBOOK and then press

<OK> to access the phonebook.

2. Press <MENU> to show ADD.

3. Press <OK> and then enter the name.

4. Press <OK> and then enter the number.

5. Press <OK> and <UP/DOWN> to select the desired ringtone for your

6. Press <OK> to store the phonebook entry.

you subscribe to Caller Display and the incoming number matches the stored

number.) Phonebook entries are stored alphabetically by name.

phonebook entry.

5.2 Search a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Enter the first letter of the name using the alphanumeric keys, and then

<UP/DOWN> to scroll to the entry youwant.

Remote operation

Using a tone-dialling phone, dial your home number

You can also use the codes on the other side of this card

While your outgoing message is playing, press

Key in your remote security code

The default code is 0000. For details of how to set a new code,

see the User Guide 8.5.9.1 of page 31.

Note: Press <*> key after OGM playback cannot access your answering machine

remotely. If the 4-digit Remote Access PIN is entered incorrectly three times

consecutively, the line will be released automatically.

Note: If your answering machine is switched oﬀ, the phone will enter into

the remote access mode after 10 rings.

You can then enter the 4-digit remote access PIN

(Default Remote Access PIN is 0000) to activate the remote access feature.

Icarus 2020 system

12 3 4

10876

11 12 13 14 15

In a home with broadband, every telephone must have a micro-filter connected,

not just the one at the telephone point that your modem is connected to.

If you need more broadband micro-filters, contact your broadband supplier.

3 GETTING TO KNOW YOUR PHONE

3.1 Handset Overview

The maximum range between the base station and the handset is approximately

300 meters. Depending on the surrounding conditions as well as spatial and

struct ural factors, the range may be reduced.

2 INSTALLING YOUR PHONE

2.1 Connecting the base station

1) Plug the power supply & line cord into

2) Plug the power adapter into a 230Vac,

3) Always use the cables provided in the box

Warning: Use only the provided adaptor, using

other power supplies may cause a hazard.

Warning: The power adaptor should be installed

and the line cord into your telephone line socket.

the base station.

50Hz mains socket,

The range indoors is normally less than outdoors, typically being up to 50 meters.

near the equipment and should be easily accessible.

Triple

• 3 Handsets

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 6 rechargeable batteries

• 1 User manual

• 2 Charger pods with

connected mains

power adapters

• 4 Handsets

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

•

• 1 User manual

• 3 Charger pods with

connected

mains power adapters

Quad

2.2 Installing and charging the batteries

1) Place the 2 batteries as indicated, ensuring their

2) Slide the battery compartment cover back.

3) Put the handset on the base and charge for

15 hours first time. A beep indicates that the handse

polarity is correct.

is properly placed on the base or charger.

If y ou h a ve a Br oadb and l i ne

If you connect your telephone to a line with

insert a micro-filter between the telephone

and the telephone line, otherwise you may get

interference between the telephone and the broadband,

which could cause problems.

a broadband connection, you will need to

Use only NiMH rechargeable batteries.

rechargeable batteries

WITH TELEPHONE ANSWERING MACHINE(TAM)CONTROL

RECALL(also called FLASH)

In idle / predialing mode:

Press to insert a recall

During a call:Press to dial

a recall

TALK ON

In idle / predialing mode:

Press to make a call

In Redial list / Call List /

Phonebookentry:

Press to make a call to the

selected entry in the list

During ringing:

Press to answer a call

LEFT SOFT KEY(MENU/OK)

In idle mode:Press

to access the main menu

In sub-menu mode:

Press to confirm the selection

During a call: Press to access

Intercom/Phonebook/ Redial

List/ Call List

TALK OFF

During a call: Press to end a call and go

back to idle screen

In menu / editing mode: Press to go back

to previous menu

In idle mode:

Press and hold to power off the handset

In idle mode (when the handset is powered

off): Press and hold to power

DOWN

In idle mode:Press to access the redial list

In menu mode:

Press to scroll down the menu items

In Phonebook list / Redial list / Call List:

Press to scroll down the list

During a call:

Press to decrease the earpiece volume

During ringing:

Press to decrease the ringer volume

In idle mode:

Press to access the call list

In menu mode:

Press to scroll up the menu items

In Phonebook list / Redial list /

Call List:

Press to scroll up the list

During a call:

Press to increase the

earpiece volume

During ringing:

Press to increase the ringer volume

RIGHT SOFT KEY(CLEAR/BACK/MUTE/INTERCOM)

n main menu mode: Press to go back to idle screen

In sub-menu mode: Press to go back to previous level

In sub-menu mode: Press and hold to go back to idle screen

In editing / predialing mode: Press to clear a character / digi

In editing / predialing mode:

Press and hold to delete all the characters / digits

During a call: Press to mute/ unmute the microphone

In idle mode:Press to intercom another handset

SPEAKERPHONE

During a call:

Press to turn on / off the speakerphone.

Call List / Phonebook entry :

Press to make a call with speakerphone

During ringing:

Press to answer a call with speakerphone

During answering machine message playback /

call screening: Press to play message via speaker

7.4.

SET THE BASE RINGER MELODY .....................................................

SET THE RINGER VOLUME .................................................................................... 23

12. IN USE LED

Steadily ON: During a call

Flashing: During ringing or new TAM message is received.

...................... 22

Icarus 2020 system

5.4 Edit a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select EDIT.

4. Press <OK> to display the current name.

5. Edit the name and press <OK>.

6. Edit the number and press <OK>

7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm.

5.5 Delete a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select DELETE

4. Press <OK> to confirm, and the entry will be deleted.

5.6 Delete the Entire Private Phonebook

1. Press <PHONEBOOK> to access the phonebook.

Press <MENU> and <UP/DOWN> to select DELETE ALL.

Press <OK> to display <CONFIRM?>.

Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

5.7 Check the Phonebook Usage

You can check how many phonebook entries are stored in your handset and

how many phonebook entries are available for you to store in the phonebook.

1. Press <PHONEBOOK> to access the phonebook.

2. Press <MENU> and <UP/DOWN> to select PB STATUS.

3. Press <OK> to display how much of the phonebook is being used,

for example <14/20 USED> means 14 entries are stored out of the total of 20

available spaces.

6 CALLER DISPLAY (NETWORK DEPENDENT)

This feature is available if you have subscribed to the Calling Line Identification

service with your network service provider. Your phone can store up to 10

received calls with date/time information in the Call List. The number will be

shown on the handset display when the phone is ringing. If the number matches

with one of the entries in your Private Phonebook, the caller’s name stored in the

private phonebook will be displayed alternately with the number, and the handset

will ring with the ringtone associated with that phonebook entry.

If the call is from someone who withheld their number, e.g. by dialling 141,

“WITHHELD” will display.

If the call is from someone whose number is unavailable, e.g. an international

call or from a private exchange, will display. “OUT OF AREA”

If you've got new Caller Display records, the handset will display "X NEW

6.1 View the Call List

All received calls are saved in the Call List with the latest call at the top of the list.

When the call list is full, theoldest call will be replaced by a new call. Any

unanswered calls which have not been viewed are marked with a

<*> icon at the

CALLS" in standby mode. The New Calls indication will remain until all the new

call records have been viewed.

centre of the bottom line of the display.

1. Press <UP> to access the call list.

OR Press <MENU> and <UP/DOWN> to show CALL LIST , .then press OK

2. Press <UP/DOWN> to select the desired entry.

3. Press <#> to view the caller’s number if applicable.

6.2 Store a Call List Number into the Phonebook

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU> and <UP/DOWN> to show ADD TO PB.

3. Press <OK> and then enter the name.

4. Press <OK> and the selected call list number is displayed.

5. Edit the number if necessary.

6. Press <OK> and <UP/DOWN> to select the ringtone.

7. Press <OK> to store the phonebook entry and return to the calls list.

4. Press <MENU>, <UP/DOWN> to show DETAILS, and then <OK> to display

the date and time of the call. Press <OK> to go back to the previous screen.

5.3 View a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select VIEW.

4. Press <OK> and <UP/DOWN> to review the name, number and ringtone

of the selected phonebook entry.

Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or

<RIGHT SOFT KEY> to view the remaining digits.

6.3 Delete an entry in the Call List

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU> and <UP/DOWN> to select DELETE.

3. Press <OK> to confirm.

6.4 Delete the entire list of the Call List

1. Follow Steps 1 and 2 in Section 6.1

2. Press <MENU> and <UP/DOWN> to select DELETE ALL.

3. Press <OK> to display <CONFIRM?>.

4. Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

7 PHONE SETTINGS

Your phone comes with a selection of settings that you can change to

personalise your phone the way you like it to work.

7.1 Date and Time Settings

If you subscribe to Caller Display the time and date settings will be automatically

updated by the

The Caller Display service only sends the month and date, not the year, so you

may need to set the year. (This is used to calculate the day for the time stamp

7.1.1 Change the Date Format

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select DATE FORMAT.

4. Press <OK> and <UP/DOWN> to select your desired date format

(DD-MM-YYor MM-DD-YY ).

5. Press <OK> to confirm.

7.1.2 Change the Time Format

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select TIME FORMAT

4. Press <OK> and <UP/DOWN> to select your desired time format

5. Press <OK> to confirm.

(12 HR or 24 HR).

network when you receive an incoming call.

on answering machine models only).

7.1.3 Set the Time

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select SET TIME.

4. Press <OK> and then enter the time information in 24 hour format.

5. Press <OK> to confirm.

Note: If time has been set before, the current time will display, otherwise,

“HH:MM” will display.

7.1.4 Set the Date

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select SET DATE.

4. Press <OK> and then enter the date information. The date entered will be in

5. Press <OK> to confirm.

Note: If date has been set before, the current date will display, otherwise,

the date entered will be in the format you set in Section 7.1.1.

“DD-MM-YY ” will display.

7.2 Alarm Settings

You can set an alarm time on this phone. When an alarm is set, the <ALARM

Icon> is shown on the handset display.When the alarm time is reached, the

<ALARM icon> and “ALARM ON” flash on the handset display, and the alarm

tone rings for 45 seconds. You can press any key to disable the alarm. If the

snooze function is activated, the alarm will sound again at the end of the snooze

period of seven minutes. You can also press and hold <TALK OFF> to , while

Note:

a. A key press will still disable the alarm even if the handset keypad is locked

b. The alarm volume level is the same as the settings of the handset ringer

volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds

at VOLUME 1

level.

when the alarm rings.

the alarm is sounding,the snooze function.

c. During an external call or internal call, if an alarm is set and when the alarm

time is reached, the <ALARM icon> and “ALARM ON” will still flash. An

alarm tone will be emitted from the earpiece to alert the user the alarm time

is reached. Once the user presses any key or presses and holds

d. During paging or ringing, the alarm will not sound when the alarm time is

reached. However, if the snooze function is enabled and there is no paging

7.2.1 Turn on/off the Alarm

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select ALARM

4. Press <OK> to confirm.

Note: If ON is selected, you will be asked to set the alarm time.

7.2.2 Set the Alarm Time (If Alarm time is set to be ON)

1. Follow Steps 1 to 4 in Section 7.2.1.

2. Enter the alarm time in 24 hour format.

3. Press <OK> to display "SNOOZE".

4. Press <OK> and <UP/DOWN> to select snooze ON or OFF.

5. Press <OK> to confirm.

7.3 Handset Settings

7.3.1 Set the Ringer Melody for Internal Calls

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP.

3. Press <OK> and <UP/DOWN> to select INT RING.

4. Press <OK> and <UP/DOWN> to select the melody you want to hear for

Note: The respective melody will be played while browsing the ringtone list.

5. Press <OK> to confirm.

3. Press <OK> and <UP/DOWN> to select ON/OFF.

<TALK OFF> to disable the alarm, the display will revert to the call duration.

or ringing, the alarm will sound again at the end of the snoo

internal calls.

7.3.2 Set the Ringer Melody for External Calls

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP.

3. Press <OK> and <UP/DOWN> to select EXT RING.

4. Press <OK> and <UP/DOWN> to select melody you want to hear for external

Note: The respective melody will be played while browsing the ringtone list.

5. Press <OK> to confirm.

7.3.3 Set the Ringer Volume

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP.

3. Press <OK> and <UP/DOWN> to select RING VOLUME.

4. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of

6 ringer volume levels including VOLUME OFF).

Note: The respective ringer volume will be played during your selection.

If VOLUME OFF is selected, the <Ringer Off> icon will be displayed.

5. Press <OK> to confirm.

7.3.4 Set Alert Tones

Three different alert tones are set on by default, but can be turned off, if desired.

Key Tone - a single beep is emitted when you press a key.

you need to charge the handset batteries.

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select TONE SETUP.

3. Press <OK> and <UP/DOWN> to select KEY TONE / BATTERY TONE /

4. Press <OK> and <UP/DOWN> to turn on or off these tones.

5. Press <OK> to confirm.

Out of Range Tone - emitted while you are talking on the phone to alert you to

move loser to the base unit, before the call is lost.

Low Battery Tone - emitted while you are talking on the phone to alert you that

OUT OF RANGE.

7.3.5 Set the Handset Language

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select LANGUAGE.

3. Press <OK> and <UP/DOWN> to select the desired language.

4. Press <OK> to confirm.

7.3.6 Rename the Handset

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS

2. Press <OK> and <UP/DOWN> to select RENAME HS.

3. Press <OK> and change the name of your handset, using <C/MUTE> to delete

4. Press <OK> to confirm.

letters and the alphanumeric keys to enter up to 10 letters for the name.

7.3.7 Choose the Information to be Displayed in Idle

You can choose to display time or handset name in your idle screen.

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select HS DISPLAY.

3. Press <OK> and <UP/DOWN> to select HANDSET NAME or TIME.

4. Press <OK> to confirm.

7.3.8 Set the Auto Answer

If you turn on the Auto Answer, you can answer a call automatically by just lifting

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select AUTO ANSWER.

3. Press <OK> and <UP/DOWN> to turn on or off the auto answer feature.

4. Press <OK> to confirm.

the handset off the base or charger, without having to press any key.

calls.

7.4 Base Settings

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.

2. Press <OK> and <UP/DOWN> to select BS RINGER.

3. Press <OK> and <UP/DOWN> to select the desired ringer melody (a total of

for your selection)

Note: The respective ringer melody will be played while browsing the melody list.

Press <OK> to confirm.

7.4.1 Set the Base Ringer Melody

5 melodies

7.4.4 Change the dial mode

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS

2. Press <OK> and <UP/DOWN> to select DIAL MODE.

3. Press <OK> and <UP/DOWN> to select TONE PULSE or

(The current setting is indicated by an asterisk to the right).

4. Press <OK> to confirm.

You should normally leave the dialling mode at its default setting of TONE (also

called DTMF) unlessthe phone is connected to an old exchange that only

Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling

recognises PULSE dialling.

for the rest of that call.

7.4.5 Change the Flash (Recall) Time

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.

2. Press <OK> and <UP/DOWN> to select FLASH TIME.

3. Press <OK> and <UP/DOWN> to select your desired flash time (SHORT,

4. Press <OK> to confirm.

You may need to change the recall (flash) time if your phone is connected to a

PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM

the right).

(250ms) or LONG (600ms).

MEDIUM,SHORT, MEDIUM, LONG, with the current setting indicated by

7.4.6 Change the System PIN Code

A 4-digit system PIN code is used for changing the system settings of the base

station. It is used to protect your phone against unauthorized use. The default

system PIN code is 0000.

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.

2. Press <OK> and <UP/DOWN> to select CHANGE PIN.

3. Press <OK> and you are requested to enter the 4-digit system PIN.

4. Enter the old system PIN.

5. Press <OK> and enter the new system PIN.

6. Press <OK> and enter the new system PIN again.

Note: If the new PIN entered in Step 6 is not the same as the new system PIN

entered in Step 5, you must enter the new system PIN at step 5 again.

7. Press <OK> to confirm

an asterisk to

7.5 Registration

If you have a multi-handset system, you already have more than one handset

registered to your base unit.

You can register additional handsets to have up to five handsets per base unit,

shown on its display. (Note: each handset

1. Press and hold <PAGE> on the base station for more than five seconds, to

mode. It will stay in registration mode

To register a new handset to your base:

with in this time.

2. Press <MENU> and <UP/DOWN> to select REGISTRATION.

3. Press <OK> and you are requested to enter the 4-digit system PIN.

4. Enter the 4-digit system PIN.

5. Press <OK> to confirm, and the display will show SEARCHING.

If the handset registration is successful, you will hear a confirmation tone and the

<antenna icon> will stop flashing.

The handset will automatically be allocated the next available handset number.

This handset number is shown in the handset display in standby mode. If the

tion is unsuccessful, the <antenna icon> will still flash.

7.6 Reset Your Phone

You can reset your phone to the default settings . After a reset, all

your

personal settings and call list entries will be deleted, but your phonebook

1. Press <MENU> and <UP/DOWN> to select

DEFAULT.

2. Press <OK> and you are requested to enter the 4-digit system PIN.

3. Enter the 4-digit system PIN.

4. Press <OK> to display CONFIRM?

5. Press <OK> to confirm, and the phone will be reset to its default settings.

8 ANSWERING MACHINE

7.4.3 De-register a Handset

This operation should only be necessary if one of your handsets becomes faulty

or lost and needs to be replaced.

You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to

Note: You cannot de-register the handset that you are currently using.

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS .

2. Press <OK> and <UP/DOWN> to select DELETE HS.

3. Press <OK> and the display shows "PIN?".

the antenna icon flashing and "REGISTER" on the display.

de-register a handset from the base station.A de-registered handset will have

4. Enter the 4-digit system PIN.

5. Press <OK> and the first handset number is displayed.

6. Press <UP/DOWN> to scroll through the list of registered handsets and

7. Press <OK> to confirm, and the chosen handset will be de-registered.

select the number of the handset you want to de-register.

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING VOLUME.

3. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of

volume levels including VOLUME OFF).

Note: The respective ringer volume will be played during your selection.

4. Press <OK> to confirm.

7.4.2 Set the Ringer Volume

Your phone includes a telephone answering machine that records unanswered

calls when it is on The LED message counter (two digits se.ven segment display)

on the base will show the number of the messages when the answering machine

is on. The answering machine can store up to 59 messages within the maximum

recording time of approximately 15 minutes. As well as recording incoming

messages, you can record memos for other users of your phone. If the answering

machine memory is full, the Handset will display TAM FULL and the handset

name alternatively in standby, or display TAM FULL and the date/time

information in standby which depends on which kind of information (Handset

name or Date/Time – See Section 7.3.7) is selected to display in Standby.

8 1.Turn On/Off the Answering Machine

You can turn on or off the answering machine through the base or handset.

When the answering machine is set to ON, calls will be answered after the set

answer delay and the caller can then leave you a message. When the answering

machine is set to OFF, calls will be answered after 10 rings and the answer only

message will be played to your callers. They will not be able to leave you a

message.

Through the Base:

1. Press <TAM ON/OFF> on the base station.

¾ If answering machine is set to ON, <TAM ON icon> displays on the handset

LCD and the 7-seg LED on the base station will display the number of

¾ If answering machine is set to OFF, <TAM ON icon> will disappear from the

handset LCD and the 7-seg LED on the base station will display - -.

incoming messages.

Through the Handset:

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM ON/OFF

3. Press <OK> and <UP/DOWN> to select ON or OFF.

4. Press <OK> to confirm.

6 ringer

with each handset's number (1 to 5)

can only be registered to one base.)

put the base station into registration

for about 1 minute, so the following handset sequence must be completed

handset registra

remains unchanged.

Note: If there are no messages, the handset display will briefly show

then return to MSG PLAYBACK.

4. During message playback, press <UP> or <DOWN> to increase or decrease

the message playback volume respectively.

5. Press <MENU> and <UP/DOWN> to select STOP, FORWARD, PREVIOUS,

DELETE to perform the following functions during message playback.

STOP: Stop the current message playback and return to the ANS. MACHINE

menu.

FORWARD: Skip to play the next message. The date and time information

of the next message will display if there is another message.

PREVIOUS: Repeat playing the current message from the beginning.

The date and time information of the current message will display.

"00-00 00-00"

DELETE: Delete the current message and the next message will be played.

Note: Alternatively, you can use the following shortcut keys to control different

Press <Key 5> to stop message playback.

Press <Key 4> once to skip to repeat playing the current message from the

Press <Key 6> to skip to play next message.

Press <Key 2> to delete the current message playback.

beginning.Press twice to skip backward to play the previous message.

operations during message playback.

8.4 Record Memo

You can record your memo message for another user. When you record a memo,

the message counter will increase by one and the message can be played back

in the same way as answering machine messages. Memo recording can still

function even when the answering machine is turned off.

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select

MEMO.

3. Press <OK> to start memo recording and “ RECORDING

” is displayed.

4. Press <OK> to stop memo recording and save the memo.

4. Press <C> to stop memo recording without saving and return back to

ANS. MACHINE menu.

8.5 Answering Machine Settings

You can use the TAM SETTINGS menu through the handset to change the

settings of your answering machine.

8.5.1 Set the Answer Mode

By default, the answer machine is set in

ANS & REC mode which allows callers

to leave a message. This mode can be changed to ANSWER ONLY which does

not allow callers to leave a message. In that case, your callers will be prompted

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select ANSWER MODE.

4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <OK> to confirm.

8.5.2 Set the Outgoing Message (OGM) Language.

The answering machine announces the outgoing message when it answers a call.

There is a pre-set OGM for each of ANS & REC mode or ANSWER ONLY

to call back later.

8.5.3 Record Your Own Outgoing Message (OGM)

You can record your own OGM for ANS & REC mode or ANSWER ONLY mode.

When you record your own OGM, it will be used when the answering machine

answers the call. If your personalised OGM is deleted, the pre-set OGM will be

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select OGM SETTINGS.

4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <OK> and <UP/DOWN> to select RECORD MESS.

restored automatically.

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select TAM LANGUAGE.

4. Press <OK> and <UP/DOWN> to select your desired OGM language.

5. Press <OK> to confirm.

6. Press <OK> to start recording your personalised OGM and “RECORDING”

7. Press <OK> to stop and save your personalised OGM. Your newly saved

OGM will playback automatically.

Alternatively, press <BACK> to return to previous screen without saving the

is displayed on the screen.

personalised OGM.

¾ If answering machine is set to ON, <TAM ON icon> displays on the handset

LCD and the 7-seg LED on the base station will display the number of

¾ If answering machine is set to OFF, <TAM ON icon> will disappear from the

handset LCD and the 7-seg LED on the base station will display - -.

incoming messages.

8 3.Delete All Messages in the Answering Machine

Delete all messages through the Base:

In idle:

1. Press and hold <DELETE> on the base station.

2. All the old messages will be deleted.

Note: New messages will not be deleted. If there are no more messages in the

answering machine,

“00’’ will display on the base station.

Delete all messages through the Handset:

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

Press <OK> and <UP/DOWN> to select DELETE ALL.

2. Press <OK> to confirm.

3. Press <OK> to delete all old messages.

Note: If there are no more messages in the answering machine, “EMPTY” will

ANS. MACHINE menu.

display and return back to

Listen to the Messages in the Answering Machine

When new messages are recorded on the answering machine, <TAM Icon>

flashes on the handset display and the message counter on base flashes with

played after all new messages are

mpletely. The message counter LED stays steady to indicate the

ages stored in the answering machine.

Listen new messages through the Base:

1. Press <PLAY> on the base station.

8.2

in the answering machine until all the new

2. The new messages are played from the loudspeaker on the base station in

the sequence they are recorded.

3. Press <+> or <-> to increase or decrease the volume during message

playback respectively.

Note: If there are no new messages, “00” will display steadily in the message

counter on the base. Press <PLAY> will have no effect and an alert tone is emitted.

Listen new messages through the Handset:

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select MSG PLAYBACK.

3. Press <OK> to start message playback and the screen displays the date and

time information of the message received.

Note: <STAR icon> is placed at the centre of the bottom of the LCD to indicate

message. If this message has been read or

<STAR icon> will disappear and will be reflected next time when you listen to

that it is a new listened, the

this message again.

the number of new messages

messages are played. Old messages will be

played co

number of old mess

mode,which can only be in English on this model.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select

RECORD TIME (Available options:

60S, 120S, 180S, or UNLIMITED)

4. Press <OK> and <UP/DOWN> to select your desired recording time.

5. Press <OK> to confirm.

8.5.7 Call Screening

When the answering machine is set to ON and when there is an incoming

Functions

Keys

While message is playing

Delete the current message playback

Repeat playing the current message

Play the message Stop the current message playback

Skip to play the next message

Stop the current message playback

Turn off the answering machine

Enter the 4-digit remote access PIN

from the beginning. Press twice to

skip backward to play the previous

message.

Turn on the answering machine

8.5.7.1 Turn Base Screening On or Off

You can listen via the base speaker to callers leaving a message, before deciding

whether to take a call or to leave the answering machine to record a message. The

SETTINGS menu on your handset.

message, At any time if you want to pick up the call, you can press <TALK ON>

on the handset

and the message recording will be

stopped automatically. If the answering machine is in the process of recording,

the message already stored will be saved.

call screening can be turned on or off using the

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select SCREENING.

4. Press <OK> and <UP/DOWN> to select ON or OFF.

5. Press <OK> to confirm.

8.5.8 Change the Compression Rate

Three different compression rates (HIGH, MEDIUM and LOW) are provided for

rate, the higher the recording quality level attained.

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select COMPRESSION.

4. Press <OK> and <UP/DOWN> to select your desired compression rate.

5. Press <OK> to confirm.

8.5.9 Activate Remote Access

Your phone lets you check your messages, or otherwise operate your answering

machine,by calling the answering machine when you are away from home by

entering a 4-digit remote access PIN on a tone-dialing phone. Use the 4-digit

remote access PIN code to prevent other people from unauthorized access of

8.5.7.2 Handset Screening

You can listen via the base speaker to callers leaving a message, before deciding

whether to take a call or to leave the answering machine to record a message. The

SETTINGS menu on your handset.

8.5.9.1 Change the 4-Digit Remote Access PIN

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS

While message is not playing

call screening can be turned on or off using the

you to select different quality levels of recording incoming message. The lower

8.5.4.1 Playback the OGM

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select OGM SETTINGS.

4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <OK> and <UP/DOWN> to select PLAYBACK.

6. Press <OK> to playback your current OGM and

the screen.

7. Press <OK> to stop the OGM playback and return to the previous menu.

Note: If a personalised OGM has not been recorded, the pre-set OGM will be played.

8.5.4.2 Delete the Personalised OGM

1. Repeat Steps 1 to 6 in Section 8.5.4.1

2. Press <C> while the OGM is playing to delete your personalised OGM and

return to the previous menu and the pre-set OGM is restored automatically.

Note: If the pre-set OGM is playing, you are not allowed to delete it, so pressing

<C> will just stop the playback and return to the previous menu.

8.5.5 Set the Answer Delay

You can set the number of rings before the answering machine answers and

starts playing your OGM. You can set the answering machine to answer after

two to eight rings or TIME SAVER.If Time Saver is set the answering machine

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select ANSWER DELAY (Available options:

2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER)

4. Press <OK> and <UP/DOWN> to select your desired answer delay.

5. Press <OK> to confirm.

will answer after 5 rings if there are no new messages, or after 2 rings if there is

a new message, so if on call charges. you call in and you don't get an answer

after 2 or 3 rings, you can hang up and save on call charges.

"PLAYING OGM"

8.5.6 Set the Recording Time of Incoming Message

You can set the maximum length of the recording time of the incoming messages.

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE

Please note that pre-set OGM cannot be deleted.

8.5.4 Playback and Delete the Outgoing Message (OGM)

You can playback your own personalised OGM or the pre-set OGM for ANS &

mode or ANSWER ONLY mode and choose to delete your personalised

is displayed on

REC

OGM during playback and record a new one whenever you want.

/ <SPEAKER PHONE>

the compression

your answering machine.

3. Press <OK> and <UP/DOWN> to select CHANGE PIN

4. Press <OK> to enter the Old PIN. (Default Remote Access PIN is 0000).

5. Press <OK> to enter the New PIN.

6. Press <OK> to enter the New PIN again.

Note: If the new PIN entered in Step 6 is not the same as the new system PIN

entered in Step 5, you must enter the new system PIN at step 5 again.

7. Press <OK> to reconfirm.

4. Press <OK> and <UP/DOWN> to select ON or OFF to turn the remote

5. Press <OK> to confirm.

8.5.9.3 Access Your Answering Machine Remotely

You can ring your phone from another tone-dialing phone to switch the

answering machine on or off, and/or listen to your messages remotely.

1. Place a call from a tone-dialing phone to your phone.

2. When the answering machine playing the OGM, answers the call and starts

Note: The * must be entered while the OGM is still playing, and the 4-digit PIN

3. Enter the 4-digit Remote Access PIN (default PIN is 0000).

Note: If the 4-digit Remote Access PIN is entered incorrectly three times

consecutively, the line will be released automatically.

4. Press the following keys to carry out your desired function.

access on or off respectively.

press <KEY *>.

should be follow without any delays.

Functions

Keys While message is not playing While message is playing

2 Delete the current message playback

4 Repeat playing the current message

from the beginning.Press twice to skip

backward to play the previous message.

5 Play the message Stop the current message playback

6 Skip to play the next message

7 Turn on the answering machine

8 Stop the current message playback

9 Turn off the answering machine

* Enter the 4-digit remote access PIN

Note: If your answering machine is switched off, the phone will enter into the

remote access mode after 1 rings.

You can then enter the the <KEY *> and the 4-digit remote access PIN (Default

Remote Access PIN is 0000) to activate the remote access feature.

8.5.9.2 Activate or Deactivate the Remote Access

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select REMOTE ACC

When your answering machine memory is full and the answer mode is in ANS &

change to ANS & RECORD mode automatically after some messages have

RECORD ANSWER ONLY ,the answer mode will change to automatically. It will

been deleted.

Problem Cause Solutions

No dialing tone when

pressing <TALK ON>

a.The connection cord of

the base station is not

plugged in.

b.The adapter cord is not

plugged in correctly in

the base station.

c. Another handset is using

the base to make a call.

d. Wrong telephone line cord

a.Check the connections. Unplug

and plug back in the mains.

Check that the telephone cord

has been plugged into the base

station and the phone socket.

b.Check the base station plug and

the 230V plug (remove and plug-in).

c.Wait until the line is unoccupied.

d.Use the original telephone line

cord supplied

When connect to a PBX,

no and/or wrong connection

after dialing.

Dialing prefix is needed. Insert the dialing prefix

"SEARCHING" is displayed. a. Base station out of range.

b. Base station not

connected to mains.

Reduce the range.

Connect base station to mains.

The call does not work. Service not activated or

wrong operator or wrong

setting

Check your Subscription with

network or change the dial mode.

No display. Empty battery Recharge battery

Answering Machine

The unit does not record

new messages.

The answering machine is

turned off.

Turn on the answering machine.

The caller cannot leave a

message.

a. The answering machine

is turned off.

b. Message memory is full.

a. Turn on the answering machine.

b. Erase unnecessary messages.

I cannot operate the

answering machine

remotely.

a. You are entering the

wrong remote access code

b. You are pressing the dial

keys too quickly.

c. The answering machine

is turned off.

d. You are using a pulse

telephone.

a. If you forget the remote maccess

code, reset to the default settings.

b. Press each key firmly.

c. Turn on the answering machine.

d. Try again using a touch tone phone

While recording an outgoing

message or listening to

messages, the unit rings

and recording stops.

A call is being received. Answer the incoming call

and try again to record your

out going message later.

Technical Support

If the fault persists...

Disconnect all other instruments connected to the same line as the

Disconnect the base unit from the telephone line and plug a different phone into

the master telephone socket.

Try making a call. If this works, the line is OK.

If the cal

l does not work, and you are

using a two-way

socket adapter, remove

it and plug a telephone directly into the socket. If the call now works, the adapter

may be faulty.

If you cannot

make a call, the fault may be on the

exchange line. Contact the

service provider (the BT engineers on 151 for UK only, or your cable company).

If you still cannot identify the cause of the problem, please read out the serial

number of this telephone to the Binatone Customer Service Center. The serial

number can be found in the battery compartment after having the batteries

For technical support, call Binatone Customer Service at 0845 345 9677(UK only).

10 DECLARATION OF CONFORMITY

The conformity to the requirements is validated by the symbol.

removed.

Please contact the technical support of the network provider for further information.

This telephone is not equipped with a grounding function! Therefore some of the

functions may be limited when used in PBX systems.

NO T E: In compliance with Directive 2002/96/EC, when you purchase a product

that comes with the symbol shown on the right, you are required to dispose of

electrical and electronic equipment by separate waste collection and you

cannot dispose of the product as normal waste.

This equipment and all its components, subsystems and consumable materials

formed an

integral part of this product and when you decide to dispose

takethem to the local recycling centres for

appropriate waste disposal, in compliance with the current regulations.

Details about the location of these centres can be obtained from

your local authority.

9 TROUBLESHOOTING

UK (B TP) V e r 1 , May 2 0 0 8

We the manufacturer / Importer : Binatone Telecom Plc,

1 Apsley Way London, NW2 7HF.

Declare under our sole responsibility that the following product

Type of equipment: Digital cordless telephone

Model Name:

Country of Origin: China

Brand:

complies with the essential protection requirements of R&TTE Directive 1999/5/EC on

the approximation of the laws of the Member States relating to Radio Spectrum Matters,

the Council Directive 89/336/EEC on the approximation of the laws of the Member

Statesrelating to electromagnetic compatibility (EMC) and the European Community

Directive 2006/95/EC relating to Electrical Safety.

Assessment of compliance of the product with the requirements relating to the

essential requirements according to Article 3 R&TTE was based on Annex III of the

Directive 1999 5/ /EC and the following standard:

Radio Spectrum: : V1.5.1EN 301406 :2003 ;

EMC: EN 301489-1:V1.5.1:2005 ;

EN 301489-6:V1.2.1;2002;

Electrical Safety: EN 60950-1:2006.

Manufacturer / Importer

(signature of authorized person)

Apr 2008

Date Signature

of them you have to

key <SPEAKER PHONE>

I rus 2020 system and try to make a call.

Icarus 2020

Binatone

17 18 19 20 21 22

282726252423

30 31 32 33 34

Produktspezifikationen

Marke:	Binatone
Kategorie:	Telefon
Modell:	Icarus 2020
Freisprecheinrichtung:	Ja
Anrufer-Identifikation:	Ja
Produktfarbe:	Schwarz
Akku-/Batterietechnologie:	Nickel-Metallhydrid (NiMH)
Befestigungstyp:	Tisch/Bank
Eingebautes Display:	Ja
Gleichstrom-Anschluss (DC):	Ja
Mikrofon Stummschaltung:	Ja
Telefonbuch Kapazität:	20 Eintragungen
Anrufbeantworter:	Ja
Wahlwiederholung:	Ja
Display:	LCD
Typ:	DECT-Telefon
Mac-Kompatibilität:	Nein
Anzahl Melodien:	5
Gesprächszeit:	10 h
Bereitschaftszeit:	100 h
Anzahl unterstützter Akkus/Batterien:	2
Farbe der Hintergrundbeleuchtung:	Grün
Drahtlose Verbindung:	Nein
Uhr mit Kalender:	Ja
Anruftimer:	Ja
Anruferlisten:	10
Multi-Function Hörer:	2
Aufnahmezeit:	15 min
Polyphoner Klingelton:	Nein