Behringer NR300 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Behringer NR300 (32 Seiten) in der Kategorie Gitarre. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
NOISE REDUCER NR300
Ultimate Noise Reduction Eects Pedal
Thank you for showing your condence in us by purchasing the Behringer
NOISE REDUCER NR300. This ultimate eects pedal is specically designed
to eliminate unwanted noise and hum without altering your tone. Thanks
to its high-performance features it preserves the original attack and
envelope while leaving your playing and dynamics intact.
1. Controls
(1) This MODE switch allows you to chose between MUTE
and mode. Pressing the pedal in MUTE mode REDUCTION
results in muting the whole input signal, to reduce noises
in during pauses for example. In REDUCTION mode,
quiet passages (when noise or hum would get obvious
to the listener) are eectively reduced. Adjustments
to threshold and decay settings are necessary in this case
(see below).
(2) Use the (old) control to dene a level threshold THRESH
in REDUCTION mode. When the input signal falls below
this value, the unit starts reducing the signal.
(3) The DECAY control determines how fast the signal reduction
is released when the input signal exceeds the threshold
value again.
(4) The MUTE/BATT LED illuminates when the eect is activated.
It also serves as a battery level indicator.
(5) The LED illuminates when the input level falls REDUCTION
below the threshold and starts getting reduced.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS connector to plug in the instrument cable.IN
V 2.0
(1)
(8)
(9)
(4)
(3)
(5)
(7)
(10)
(6)
(2)
2NOISE REDUCER NR300
(8) The ¼" TS connector sends the signal to your amp.OUT
(9) Use this ¼" TS connector to connect it to the input SEND
of an external eect unit. This way you can feed in an eect
signal while simultaneously eliminating noises from the unit.
(10) The ¼" TS connector is used to feed in the external RETURN
eect signal.
Use the connection to plug in a 9 V power supply (not included). DC IN
The is located underneath the pedal cover. BATTERY COMPARTMENT
To install or replace the 9 V battery (not included), press the hinges
with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
◊
◊
◊
◊ ◊ ◊ The NR300 has no on/o switch. As soon as you insert the
jack into the in connector, the NR300 begins running.
When not using the NR300, remove the jack from the in
connector. This extends the life of the battery.
The is located at the bottom.SERIAL NUMBER
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Limited Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at community.musictribe.com/pages/
support#warranty.
4. Specications
In
Connector ¼" TS
Impedance 500 kΩ
Out
Connector ¼" TS
Impedance 1 kΩ
Send
Connector ¼" TS
Impedance 1 kΩ
Return
Connector ¼" TS
Impedance 50 kΩ
3NOISE REDUCER NR300
Power Supply
9 V , 100 mA DC regulated
Behringer PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs/0.33 kg
Behringer is constantly striving to maintain the highest professional standards. As a result
of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may therefore differ from those listed or shown.
Produktspezifikationen
| Marke: | Behringer |
| Kategorie: | Gitarre |
| Modell: | NR300 |
| Breite: | 70 mm |
| Tiefe: | 123 mm |
| Gewicht: | 330 g |
| Höhe: | 54 mm |
| Typ: | Effektpedal |
| Vorgesehene Verwendung: | Konzert / Studio |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Behringer NR300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gitarre Behringer
4 Oktober 2024
29 September 2024
24 September 2024
22 September 2024
12 September 2024
16 August 2024
15 August 2024
14 August 2024
13 August 2024
11 August 2024
Bedienungsanleitung Gitarre
- Gitarre Yamaha
- Gitarre Pyle
- Gitarre Sennheiser
- Gitarre Peavey
- Gitarre Fender
- Gitarre Boss
- Gitarre Chord
- Gitarre Line 6
- Gitarre Gibson
- Gitarre Orange
- Gitarre Bugera
- Gitarre Ibanez
- Gitarre Gretsch Guitars
- Gitarre AER
- Gitarre Gallien-Krueger
- Gitarre Ultrasound Amplifiers
- Gitarre Epiphone
- Gitarre Gretsch
- Gitarre Warwick
- Gitarre Cordoba
- Gitarre Aria
- Gitarre Traveler Guitar
- Gitarre Carlsbro
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
3 Oktober 2024
9 September 2024
5 September 2024
3 September 2024
2 September 2024
2 September 2024
2 September 2024
1 September 2024
31 August 2024