BeamZ 160.571 Bedienungsanleitung

BeamZ Lichteffektmaschine 160.571

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für BeamZ 160.571 (12 Seiten) in der Kategorie Lichteffektmaschine. Dieser Bedienungsanleitung war für 38 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

BUBBLE MACHINE

160.571

INSTRUCTION MANUAL

HANDLEIDING

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUGSANVISNING

WARNING

- Read the instruction manual thoroughly prior to using the unit.

- Keep this manual for future reference.

- Keep out of the reach of children.

- For indoor use only in dry rooms.

- Do not block the fan or the bubble wheel.

- Do not block the ventilation holes.

- Use good quality bubble oil.

- Do not use inﬂammable chemicals.

- Do not use the unit at room temperatures of more than 40°C.

- Switch the unit oﬀ before you reﬁll the tank.

- If the unit I ﬁtted with an earthed plug, this must be connected to an earthed outlet.

- The unit does not contain any user replaceable parts other than those speciﬁed in this

manual.

- If the plug and/or mains lead are damaged, they need to be repaired by a qualiﬁed

technician.

- During installation, make sure that nobody is standing in the mounting area.

- The unit contains voltage carrying parts. Do NOT open the housing.

- Unplug the unit from the mains prior to repairs or maintenance.

- Never plug or unplug the unit with wet hands.

- If the unit is damaged to an extent that you can see internal parts, do not plug the unit

into a mains outlet.

- Only connect this unit to an earthed mains outlet of 220- Vac/50Hz and 10-16A. 240

- When you unplug the unit from the mains always pull the plug, never the lead.

- In order to prevent dropping of the unit, a safety fastening needs to be installed. This

- In order to avoid accidents in public premises, the local legal requirements and safety

regulations/warnings must be fulﬁlled.

Use

- Place the unit on a ﬂat, stable surface which must not be tilted more than 10° (see

drawing)

- Fill the tank up to the marking with a good quality bubble ﬂuid ( order nr.160.575).

- Switch the unit on via the On/Oﬀ switch on the rear side.

- Switch the unit oﬀ after use and unplug it from the mains if it will not be used for a long

period of time.

- Rinse the unit regularly with clean water.

101010

PLEASE DON'T FILL OVER THE LINE!

Speciﬁcations

Power supply: ............................................................. 22 2400- VAC / 50 Hz

Rotation speed: ................................................................................ 24 rpm

Dimensions: ................................................................ 250 x 240 x 272 mm

Weight: ............................................................................................... 3,8 kg

 Speciﬁcations and design subject to changes without prior notice

Do not attempt to make any repairs yourself. This would invalid your warranty.

Do not make any changes to the unit. This would also invalid your warranty.

The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual.

Tronios cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and

warnings. This is also applicable to all damages in whatever form.

Produktspezifikationen

Marke:	BeamZ
Kategorie:	Lichteffektmaschine
Modell:	160.571
Gewicht:	3000 g
Stromverbrauch (Standardbetrieb):	40 W
Eingangsspannung:	220-240 V
Eingangsfrequenz:	50 Hz
Abmessungen Gerät (B x H x T):	210 x 235 x 250 mm