Bauknecht WMT 612 Bedienungsanleitung

Bauknecht Waschmaschine WMT 612

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bauknecht WMT 612 (4 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

1 Programme selector

2 “Start/Pause“ button

3 “Reset/Drain“ button

4 “Temperature“ button

5 “Start delay“ button

6 Child lock combination

7 “Spin“ button

8 Time

9 Temperature

10 Washing phase

INDICATORS

Detergent over dosage

Lid open

Failure: Call Service

Failure: Water lter clogged

Failure: No wate

In the event of any failure, refer to the

“TROUBLESHOOTING“ section

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.bauknecht.eu/register

CONTROL PANEL

PROGRAMME CHART

PRODUCT DESCRIPTION

1. Lid handle

2. Lid

3. Control panel

4. Detergent dispenser

5. Drum

6. Water lter - behind the cover

7. Mobility lever (depending on model)

8. Adjustable feet (x2)

DETERGENT DISPENSER

Main wash compartment

Detergent for the main wash, stain remover or

water softener.

Prewash compartment

Detergent for the prewash.

Softener compartment

Fabric softener. Liquid starch. Bleach.

Pour in softener, starch or bleach solution

only up to the “max” mark.

Release button 

Press to remove tray for cleaning.



Quick guide

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bracket is removed.

For more detailed instructions on how to remove it, see the Installation Guide.

1 2 43 5 6

* After programme end and spinning with maximum selectable spin speed, in default

programme setting.

** The duration of the programme is shown on the display.

The sensor technology adapts water, energy and programme duration to your wash load.

Eco 40-60 - Test wash cycle in compliance with 2019/2014 regulation. The most ecient

programme in terms of energy and water consumption for washing normally soiled cotton

laundry. Display only: Spin speed values shown on the display can slightly diers from the

values stated in the table

For all Test Institutes

Long wash cycle for cottons: set wash cycle Cotton with a temperature of 40°C.

Synthetic program along: set wash cycle Synthetics with a temperature of 40°C.

This data may dier in your home due to changing conditions in inlet water temperature,

water pressure etc. Approximate programme duration values refer to the default setting of

the programmes, without options. The values given for programmes other than the eco 40-

60 programme are indicative only.

Max load 6,0 Kg

Power consumption in o-mode 0,11 W / in left-on mode 0,11 W Detergents and additives Recommended

detergent

Residual

dampness % *

Energy

consumption kWh

Total water lt

Laundry

temperature °C

Programme

Temperatures Max.

Spin

speed

(rpm)

Max

load

(kg)

Duration

(h : m)

Prewash Main

wash Softener

Powder Liquid

Setting Range

Mischwäsche Mixed 40°C 20 - 60°C 1200 3,0 ** –     – – – –

Eco 40–60 Eco 40–60 40°C 40°C

1151 6,0 3:15 –     53 0,71 52 40

1151 3,0 2:35 –     53 0,35 40 27

1151 1,5 2:20 –     53 0,22 30 25

Baumwolle Cotton 60°C 20 - 95°C 1200 6,0 2:30      57 1,04 48 55

Pegeleicht Synthetics 40°C 20 - 60°C 1200 3,0 1:40      40 0,52 50 42

Fein Delicates 40°C 20 - 40°C 1000 1,5 **    –– – – –

Wolle Wool 40°C 20 - 40°C 1000 1,0 ** –   –– – – –

Schleudern Spin – – 1200 6,0 ** – – – – – – – – –

Spülen &

Schleudern Rinse & Spin – – 1200 6,0 ** – – – – – – – –

Aqua saver Aqua saver 40°C 20 - 40°C 1200 2,5 ** – – – – – – –

Antiecken Anti stain 20°C 20°C 1200 4,0 ** –     – – – –

20°C 20°C 20°C 20°C 1200 6,0 1:50 –   –53 0,15 48 20

Sport Sport 30°C 20 - 30°C 1200 3,0 **     – – – – –

Kurz 30’ Rapid 30’ 30°C 20 - 30°C 1200 3,0 0:30    –62 0,25 42 26

Buntwäsche Colours 40°C 20 - 60°C 1000 4,0 **     – – – – –

  Dosing required Dosing optional

PROGRAMMES

For choosing the appropriate programme for your kind of

laundry, always respect the instructions on the care labels of

the laundry. The value given in the tub symbol is the maximum

temperature possible for washing the garment.

Mixed / Mischwäsche

For washing lightly to normally soiled resilient garments in cotton, linen,

synthetic fibres and mixed fibres.

Eco 40-60

For washing normally soiled cotton garments declared to be washable at 40

°C or 60 °C, together in the same cycle. This is the standard cotton programme

and the most efficient in terms of water and energy consumption.

! The cycle runs only at 40°C as per regulation.

Cotton / Baumwolle

Normally to heavily soiled and robust cottons .

Synthetics / Pflegeleicht

For washing soiled garments made from synthetic fibres (such as polyester,

polyacrylic, viscose, etc.) or cotton/synthetic blends.

Delicates / Fein

For washing particularly delicate garments. Preferably turn garments inside

out before washing.

Wool / Wolle

All wool garments can be washed using programme ‚ “Wool“ even those

carrying the “hand-wash only“ label. For best results, use special detergents

and do not exceed max kg declaration of laundry.

Spin / Schleudern

Spins the load then empties the water. For robust laundry.

Rinse & Spin / Spülen & Schleudern

Separate rinse and intensive spin programme. For robust

laundry.

Aqua saver

Lightly soiled laundry made of synthetic fifibres, or synthetics mixed with

cotton garments. Saving programme with a very low water consumption. Use

liquid detergent and the lowest recommended amount for 2.5kg laundry. Do

not use softener.

Antistain / Antiflecken

This programme ensures maximum stain removal capacity with no need for

pre-treatment at low temperatures, preserving fabrics and colours.

20 °C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Sport

Normally soiled and sweaty sportswear made of cotton jersey or microfi

bers. Includes a prewash cycle – you can add detergent also to the prewash

chamber. Do not use softener.

Rapid 30’ / Kurz 30’

For washing lightly soiled garments quickly. This cycle lasts only 30 minutes,

saving time and energy.

Colours / Buntwäsche

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use

heavy duty detergent, if necessary also stain removers or bleaches on oxygen

basis. Do not use liquid detergent.

FIRST TIME USE

To remove any manufacturing debris select the “Cotton“ programme at a

temperature of 95°C. Pour a small quantity of detergent powder into the

main wash compartment of the detergent dispenser (maximum 1/3 of the

quantity the detergent manufacturer recommends for lightly soiled laundry).

Start the programme without adding any laundry.

DAILY USE

Prepare your laundry according to the recommendations in the “HINTS

AND TIPS“ section. Load the laundry, close the drum door and check that

it is closed properly. Pour in the detergent and any additives. Observe the

dosing recommendations on the detergent pack. Close the lid. Turn the

programme selector to the desired programme and select any option if

needed. The display shows the duration of the selected programme (in hours

and minutes), and the indicator for the “Start/Pause“ button flashes. The

temperature and spin speed can be changed by pressing the “Temperature“

button or the “Spin“ button. Open the tap and press the “Start/Pause“ button

to start the wash cycle. The “Start/Pause“ indicator will lights up and the door

will be locked. Due to variations in load and temperature of inlet water, the

remaining time is newly calculated in certain programme phases. If this is the

case, an animation appears on the time display.

PAUSE OR CHANGE A RUNNING PROGRAMME

To pause the wash cycle, press the “Start/Pause“ button, the indicator light

blinks. Select any new programme, temperature, options or spin speed if

you wish to change those settings. Press the “Start/Pause“ button again to

start the wash cycle from the point at which it was interrupted. Do not add

detergent for this programme.

LID OPEN INDICATOR

Before starting and after the end of a programme, the “Lid open“

indicator lights to show that the lid can be opened. As long as a wash

programme is running, the lid remains locked and must on no account be

forced open. In case you have an urgent need to open it during a running

programme, for example to add more laundry, or to remove laundry which

was loaded by mistake, press the “Start/Pause“ button. If the temperature

is not too high, the “Lid open“ indicator light turns on. It may last a

while until you can open the lid. Press “Start/Pause“ to proceed with the

programme again.

PROGRAMME END

The “Lid open“ indicator lights up and the display shows . Turn the

programme selector to the “O“ position and close the water tap. Open the

lid and drum and unload the machine. Leave the Lid open for some time to

allow the interior of the machine to dry. After about a quarter of an hour,

the washing machine will switch off completely to save energy.

To cancel a running programme before the end of cycle, press the

“Reset/Drain“ button for at least 3 seconds. The water is drained out. It may

last a while until you can open the lid.

OPTIONS

! When the combination of programme and additional option(s) is not

possible, the indication lights switch o automatically.

! Unsuitable combinations of options are deselected automatically.

15 ° Green & clean

Saves energy used for water heating while maintaining a good wash

result. Supports colour maintenance when washing coloured laundry.

Recommendable for lightly soiled laundry without stains. Make sure that your

detergent is suitable for cold wash temperatures.

Rapid / Kurz

Enables quicker washing by shortening the programme duration.

Recommendable for small loads or only lightly soiled laundry.

Temperature / Temperatur

Every programme has a predefined temperature. If you want to change

the temperature, press the “Temperature“ button. The value appears on

the display.

FreshFinish

Select this option if you cannot unload the laundry soon after

programme end, or if you tend to forget the laundry in your washing

machine. It will help to keep your laundry fresh. The washing machine

will start to tumble the laundry periodically after programme end. The

light of the “FreshFinish“ button will blink while this function is active,

and the display will show an animation. The periodic tumbling will last up

to approximately 6 hours after the end of your wash programme, and you

can stop it at any time by pressing the “FreshFinish“ button. It will last a

while until you can open the door. After the “FreshFinish“ period has run

out, the display indicates .

Start delay / Startvorwahl

To set the selected programme to start at a later time, press the “Start

delay“ button to set the desired delay time. The lamp for the

“Start delay“ option button lights up, and it goes off when the programme

starts. Once having pressed the “Start/Pause“ button, the countdown of

the time delay begins. Number of hours pre-selected can be reduced by

pressing the “Start delay“ button again. Do not use liquid detergent when

activating this option. To cancel the “Start delay“ turn the programme

selector to another position.

Prewash / Vorwäsche

Only for heavily soiled loads (for example sand, granular dirt). Increases

the cycle time by approximately 15 min. Do not use liquid detergent for

the main wash when activating the Prewash option.

Intensive rinse / Intensiv spülen

Helps to avoid detergent residues in the laundry by extending the rinse

phase. Particularly suitable for washing baby laundry, for people suffering

from allergies and for areas with soft water.

Soil Level / Fleckenstopp

It is an option working on 3 different levels (lightly soiled, normaly soiled,

heavily soiled) that are specially designed to set the right washing action,

depending on your cleaning needs:

Heavily soiled : this option is designed for high levels of dirtiness,

removing most stubborn stains.

Normaly soiled : this option is designed to remove everyday stains.

Lightly soiled : this option is designed to remove lightly soiled stains.

Spin (incl. Rinse hold )

Every programme has a predefined spin speed. Press the button to set

another spin speed. If you select spin speed “0” , the final spinning is

cancelled and the water is drained out only. However, intermediate spin

phases remain during the rinse.

If you select “Rinse hold” , the laundry remains in the last rinse water

without progressing to the final spin cycle, to avoid creasing and prevent

colours from changing. To activate the “Rinse hold” , press the “Spin/

Rinse hold” button repeatedly until the “Rinse hold” symbol on the

display lights up. The wash programme stops to “Rinse hold” when

the “Rinse hold” symbol on the display blinks; the light of “Start/

Pause” button also blinks. To terminate the “Rinse hold” by spinning

the laundry, press “Start/Pause” - the laundry will be spun with the default

spin speed. You can also select another spin speed with the “Spin/ Rinse

hold” button before you start the spin cycle by pressing “Start/Pause” . To

terminate the “Rinse hold” by draining the water without spinning,

press the “Spin/ Rinse hold” button until spin speed “0” appears on the

display; then press “Start/Pause” to start the draining. Do not leave the

laundry to soak for too long in the “Rinse hold” (especially silk).

CHILD LOCK

You can lock the buttons of the control panel against improper use (e.g. by

children). Press both of the child lock buttons simultaneously and hold them

for at least 3 seconds. The key symbol on the display lights up. To

unlock the buttons again proceed in the same way.

BLEACHING

Wash your laundry in the desired programme, Cotton or Synthetics , adding

an appropriate amount of chlorine bleach to the Softener chamber (close

the lid carefully). Immediately after the end of the programme, turn the

“Programme selector” and start the desired programme again to eliminate

any residual bleach smell; if you want, you can add softener. Never put both

chlorine bleach and softener into the softener chamber at the same time.

HINTS AND TIPS

Sort your laundry according to

Type of fabric/care label (cotton, mixed fifibres, synthetics, wool, handwash

items). Colour (separate coloured and white items, wash new coloured items

separately). Delicates (wash small items – like nylon stockings – and items

with hooks – like bras – in a cloth bag or pillow case with zip).

Empty all pockets

Objects like coins or lighters can damage your laundry as well as the drum.

Appliance interior

If you never or seldom wash your laundry at 95°C, we recommend to

occasionally run a 95°C programme without laundry, adding a small amount

of detergent, to keep the interior of the appliance clean.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus

detergent in your laundry and it saves money by avoiding waste of surplus

detergent

Use low temperature and longer duration

The most efficient programmes in terms of energy consumption are generally

those that perform at lower temperatures and longer duration.

Observe the load sizes

Load your washing machine up to the capacity indicated in the “PROGRAMME

CHART” table to save water and energy.

Noise and remaining moisture content

They are influenced by the spinning speed: the higher the spinning speed

in the spinning phase, the higher the noise and the lower the remaining

moisture content.

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch off and unplug the washing

machine. Do not use flammable fluids to clean the washing machine. Clean

and maintain your washing machine periodically (at least 4 times per year).

Cleaning the outside of the washing machine

Use a soft damp cloth to clean the outer parts of the washing machine. Do

not use glass or general purpose cleaners, scouring powder or similar to clean

the control panel – these substances might damage the printing.

Detergent dispenser

Clean regularly, at least three or four times a year, to prevent detergent build-

up:

Press the release button to release the detergent dispenser and remove it. 

A small quantity of water can remain in the dispenser, thus you should carry it

in an upright position. Wash the dispenser using running water. You can also

remove the siphon cap on the back of the

dispenser for cleaning. Replace the siphon cap in the dispenser (if removed)

Reinstall the dispenser by locating the dispenser’s bottom tabs into the

appropriate openings on the lid, and by pushing the dispenser against the

lid until it locks into place. Make sure that the detergent dispenser is correctly

reinstalled.

Checking the water supply hose

Check the inlet hose regularly for brittleness and cracks. If damaged, replace

it by a new hose available through our After-Sales Service or your specialist

dealer. Depending on the hose type: If the inlet hose has a transparent

coating, periodically check if the colour intensifies locally. If yes, the hose

may have a leak and should be replaced. For water stop hoses (If

available): check the small safety valve inspection window (see arrow). If it is

red, the water stop function was triggered, and the hose must be replaced

by a new one. For unscrewing this hose, press the release button (if available)

while unscrewing the hose.

Cleaning the mesh filters in the water supply hose

Check and clean regularly (at least two or three times a year).

Close the tap and loosen the inlet hose on the tap. Clean the internal mesh

filter and screw the water inlet hose back onto the tap. Now unscrew the inlet

hose on the rear of the washing machine. Pull off the mesh filter from the

washing machine connection with universal pliers and clean it. Refit the mesh

filter and screw the inlet hose on again. Turn on the tap and ensure that the

connections are completely water-tight.

Cleaning the water filter / draining residual water

The washing machine is provided with a self-cleaning pump. The filter keeps

objects like buttons, coins, safetypins etc. which have been left in the laundry.

If you used a hot wash programme, wait until the water has cooled down

before draining any water. Clean the water filter regularly, to avoid that the

water cannot drain after the wash due to obstruction of the filter. If the water

cannot drain, the indicator indicates that the water filter may be clogged.

Open the filter cover with a coin. Place a broad, flat container beneath the

water filter, to collect the drain water. Slowly turn the filter counterclockwise

until water flows out. Let the water flow out, without removing the filter.

When the container is full, close the water filter by turning it in clockwise.

Empty the container. Repeat this procedure until all the water has drained. Lay

a cotton cloth beneath the water filter, which can absorb a small amount of

rest water. Then remove the water filter by turning it out anti clockwise. Clean

the water filter (remove residues in the filter and clean it under running water)

and the filter chamber. Make sure the pump impeller (in the housing behind

the filter) is not obstructed. Insert the water filter and close the filter cover:

Reinsert the water filter again by turning it in clockwise direction. Make sure

to turn it in as far as it goes. To test water tightness of the water filter, you can

pour about 1 liter of water into the drum and check that water does not leak

from the filter. Then close the filter cover.

Lid seal

Check the condition of the lid seal periodically and clean it from time to time

with a damp cloth.

Recovering an object that falls between the drum and the tub

If an object accidentally falls between the drum and the tub, you can recover

it thanks to one of the removable drum lifters.

Unplug the washing machine. Remove the laundry from the drum. Close the

drum flaps and turn the drum a half-turn (picture ). Using a screw-driver a

press on the plastic end, while sliding the lifter from left to right (picture b, c)

by hand it will fall into the drum. Open the drum. You can recover the object

through the hole in the drum. Refit the lifter from inside the drum: Position

the plastic tip above the hole on the right side of the drum (picture d). Then

slide the plastic lifter from right to left until it clips. Close the drum flaps again,

turn the drum through half a turn and check the positioning of the blade at all

its anchorage points. Plug the washing machine in again.

TRANSPORT AND HANDLING

Pull out the mains plug, and close the water tap. Disconnect the inlet hose

from the water tap, and remove the drain hose from your draining point.

Remove all rest water from the hoses and washing machine and fix hoses

so that they cannot get damaged during transport. To facilitate moving the

machine, pull the mobility lever situated at the bottom front (if available on

your model) out a little by hand. Pull the washing machine out to the stop

with the foot. Afterwards push the mobility lever back into the original stable

position. Refit the transport bracket. Follow the instructions for removing the

transport bracket in the INSTALATION GUIDE in reverse order.

abcd

Quick guide

Produktspezifikationen

Marke:	Bauknecht
Kategorie:	Waschmaschine
Modell:	WMT 612

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bauknecht WMT 612 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Waschmaschine Bauknecht

Bauknecht B8 W046WB DE Bedienungsanleitung

6 Oktober 2024

Bauknecht B8 W046WB BE Bedienungsanleitung

6 Oktober 2024

Bauknecht Stuttgart WA 1209 Bedienungsanleitung

22 September 2024

Bauknecht WA Uniq 824 BW Bedienungsanleitung

19 September 2024

Bauknecht Excellence 4470P Bedienungsanleitung

15 September 2024

Bauknecht WM Class 7A Bedienungsanleitung

10 September 2024

Bauknecht WM Sense 824 PS Bedienungsanleitung

10 September 2024

Bauknecht B7X 89 SILENCE DE Bedienungsanleitung

6 September 2024

Bauknecht WAEN 75353 Bedienungsanleitung

5 September 2024

Bauknecht NM22L 948 WS AE BE Bedienungsanleitung

4 September 2024

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung für -Kategorien-

Candy CS 15102D3-80 Bedienungsanleitung

16 Oktober 2024

GE GSD3715FAA Bedienungsanleitung

16 Oktober 2024

Freggia WTIE148 Bedienungsanleitung

16 Oktober 2024

Freggia WISE126R Bedienungsanleitung

16 Oktober 2024

Freggia WISE126B Bedienungsanleitung

16 Oktober 2024

Freggia WISE126 Bedienungsanleitung

16 Oktober 2024

Freggia WISA105 Bedienungsanleitung

16 Oktober 2024

Freggia WISA106 Bedienungsanleitung

16 Oktober 2024

Freggia WIA107 Bedienungsanleitung

16 Oktober 2024

Freggia WDIE14106 Bedienungsanleitung

16 Oktober 2024