Bauknecht TK Prime 75A3 BW Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Bauknecht TK Prime 75A3 BW (8 Seiten) in der Kategorie Trockner. Dieser Bedienungsanleitung war fĂĽr 37 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
1
EN
PRODUCT DESCRIPTION
CONTROL PANEL
1. Worktop
2. Control panel
3. Water tank
4. Door
5. Door handle
6. Door filter (behind
door)
7. Bottom filter (behind
flap)
8. Adjustable feet (4)
1. On/Off button (Reset if
long pressed)
2. Programme button
3. Settings button
4. Key lock
5. Steam option
6. Knob (Turn to select /
Press to confirm)
7. Finish in
8. Drying time
9. Dryness level
10. Options button
11. Start / Pause button
12. Display
13. Programmes area
1. 7.2.
12.
6. 8.4. 10.3. 9.5. 11.
1.
2.
3.
6.
4.
7.
8.
13.
DAILY REFERENCE
GUIDE
THANK YOU FOR PURCHASING A BAUKNECHT
PRODUCT
To receive more comprehensive help and support, please
register your product at www. bauknecht. eu / register
WWW
You can download the Safety Instructions and
the Use and Care Guide by visiting our website
docs. bauknecht. eu and following the
instructions on the back of this booklet.
Before using the appliance carefully read the Health and Safety guide.
5.
APPLIANCE
2
BEFORE USING THE DRYER
CHECK DRAIN HOSE AND WATER TANK
Make sure that the water tank is correctly inserted.
Make sure that the drain hose on the back of the dryer is xed
correctly, either to the dryer’s water tank, or to your domestic
sewage system (see Installation guide).
1. LOAD LAUNDRY
• Prepare your laundry according to the
recommendations in section “HINTS
AND TIPS”.
Make sure that pockets are empty.
• Open the door and load the laundry.
Observe the maximum load sizes given
in the PROGRAMME CHART.
2. CLOSE THE DOOR
• Make sure that no laundry gets
stuck between door glass and door
lter.
• Close the door so that you can hear it click shut.
3. SWITCH ON DRYER
• Press the until the On/O button
programme button lights up. An animation
occurs, and there is a sound. Afterwards the
dryer is ready to be operated.
FIRST TIME USE
DAILY USE See Use and Care Guide for more details on functions / see last page for
information on how to obtain the Use and Care Guide
When switching on the dryer for the rst time, you will be asked to
• Set the desired language
• Adapt the value for your local water conductivity
• Set the dryer to recall the last used programme setting or not
when switching it on.
Refer to HINTS AND TIPS and OPTIONS, FUNCTIONS AND
INDICATORS / Settings.
WARNING Make sure that no lighters or
matches remain in the laundry
Make sure that the laundry is
not soaked with flammable
liquids.
3
EN
4. SET THE DESIRED PROGRAMME
GUIDED MODE - the button light will guide you through setting
your programme in the following order: selection of programme /
drying time (ONLY if Drying time or Airing programme is selected) /
dryness level (only if selectable/adjustable) / options. As soon as you
conrm a selection by pressing the knob, the button light will jump
to the next step.
• Select programme:
Make sure that the programme button lights up.
Turn the knob to select the desired programme. The indicator next
to the selected programme lights up. Conrm by pressing the knob.
Programme position oers a choice of special programmes,
which you can select by turning the knob; afterwards press the
knob to conrm the selected programme.
Find more information regarding programmes in the Programme
Chart.
• Select Drying time, if needed
ONLY if you have selected programme Drying time or
Airing, you can set the desired drying / airing time from a minimum
of 10 minutes to maximum 180 minutes (three hours).
Make sure that the Drying time button lights up. Turn the knob to
select the desired drying / airing time. Conrm it by pressing the
knob.
• Set dryness level, if needed
If you want to change the dryness level, make sure that the
Dryness level button lights up. Turn the knob to select the desired
dryness level, then press the knob to conrm.
• Select options, if needed
• If you want to select additional options, make sure that the
options button lights up. The options which are selectable
for your programme are indicated by lighting arrows .
Turn the knob to select the desired options. The symbol of the
selected option blinks. To conrm it, press the knob.
Some options / functions can be selected by directly pressing the
button:
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
INDIVIDUAL MODE
After you have switched on the dryer, you are not forced to follow
the GUIDED MODE.
It is up to you which order you choose to set your programme. To do
a setting, rst press the relevant button, then turn the knob to
select, and nally press the knob to conrm.
The variety of options and dryness levels depends on the
programme selected. Therefore it is recommended to start your
setting with selecting the programme.
5. START PROGRAMME
• Press and hold Start/Pause until the button lights up solidly;
the drying process starts.
• The duration can be recalculated and adapted in the course of
the programme. During such phases, an animation occurs on the
display.
6. CHANGE THE SETTINGS OF A RUNNING PROGRAMME, IF
NEEDED
You can still change some settings after a programme was started:
Adjust drying time (only if programme Drying time or Airing is
selected):
Adjust or cancel “Finish in”, if a delay was selected and started
Add or cancel an option, provided the progress of the programme
still allows it.
• Press the relevant button. The selected setting will blink for a few
seconds.
• While blinking, you can adjust the setting by turning the knob. If
the value or setting stopped blinking, press the button again.
• Press the knob to conrm the modication. If you do not conrm,
the modication will be conrmed automatically – the modied
setting will stop blinking.
The programme will continue automatically.
To change the settings of a running programme or delay, you can
also:
• Press Start/Pause to put the running programme on pause
• Change your settings
• Press Start/Pause again to continue the programme.
7. RESET A RUNNING PROGRAMME, IF NEEDED
• Press and hold the On/O button until the display indicates
that the programme is cancelled.
8. SWITCH OFF THE DRYER AFTER PROGRAMME END
• The display indicates that the cycle has nished. Press On/
O to switch o the dryer. Open the door and take out your
laundry.
• The dryer will switch o automatically in about a quarter of an
hour after programme end, to save energy.
• If not switched o right after programme end, the dryer will
tumble the laundry for about 10 minutes, to prevent creasing.
The display shows an animation.
9. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN
BOTTOM FILTER
• Refer to section CARE AND MAINTENANCE.
Produktspezifikationen
| Marke: | Bauknecht |
| Kategorie: | Trockner |
| Modell: | TK Prime 75A3 BW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bauknecht TK Prime 75A3 BW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Trockner Bauknecht
26 Mai 2024
20 Mai 2024
11 Mai 2024
9 Mai 2024
28 April 2024
26 April 2024
25 April 2024
23 April 2024
7 April 2024
Bedienungsanleitung Trockner
- Trockner Sinbo
- Trockner Samsung
- Trockner Clatronic
- Trockner Emerio
- Trockner Coline
- Trockner Medion
- Trockner Nedis
- Trockner Hanseatic
- Trockner LG
- Trockner Adler
- Trockner Camry
- Trockner Trisa
- Trockner Bosch
- Trockner AEG
- Trockner Asko
- Trockner Siemens
- Trockner Electrolux
- Trockner Fagor
- Trockner Gorenje
- Trockner Klarstein
- Trockner Koenic
- Trockner Miele
- Trockner Teka
- Trockner Whirlpool
- Trockner Bomann
- Trockner Vox
- Trockner Mesko
- Trockner Bush
- Trockner Thomson
- Trockner Amica
- Trockner BEKO
- Trockner Grundig
- Trockner Hotpoint
- Trockner Schneider
- Trockner Sharp
- Trockner Smeg
- Trockner AEG-Electrolux
- Trockner Aliomatic
- Trockner Ardo
- Trockner Ariston
- Trockner Aspes
- Trockner Balay
- Trockner Bellavita
- Trockner Blomberg
- Trockner Scandomestic
- Trockner Brandt
- Trockner Candy
- Trockner Castor
- Trockner Comfee
- Trockner Constructa
- Trockner CorberĂł
- Trockner Daewoo
- Trockner Elektra Bregenz
- Trockner ELIN
- Trockner Eudora
- Trockner Eurotech
- Trockner Exquisit
- Trockner Mitsubishi
- Trockner GE
- Trockner Haier
- Trockner Hisense
- Trockner Hoover
- Trockner Hotpoint-Ariston
- Trockner Ignis
- Trockner Indesit
- Trockner Juno
- Trockner Kelvinator
- Trockner Maytag
- Trockner Midea
- Trockner Caple
- Trockner Neff
- Trockner Nordmende
- Trockner Otsein-Hoover
- Trockner Privileg
- Trockner Rommer
- Trockner Saivod
- Trockner ETNA
- Trockner Schulthess
- Trockner Frigidaire
- Trockner SIBIR
- Trockner Speed Queen
- Trockner Svan
- Trockner Thor
- Trockner V-ZUG
- Trockner Vestel
- Trockner Vestfrost
- Trockner Zanker
- Trockner Zanussi
- Trockner Zerowatt
- Trockner Pelgrim
- Trockner Philco
- Trockner Akai
- Trockner Arçelik
- Trockner Continental Edison
- Trockner Tesla
- Trockner ProfiCare
- Trockner Bimar
- Trockner DeLonghi
- Trockner Element
- Trockner Leifheit
- Trockner Ariete
- Trockner Remington
- Trockner Morris
- Trockner Cylinda
- Trockner MPM
- Trockner UPO
- Trockner Thomas
- Trockner Logik
- Trockner Orima
- Trockner Proline
- Trockner Westinghouse
- Trockner Amana
- Trockner Gram
- Trockner Omega
- Trockner Profilo
- Trockner Lamona
- Trockner Kogan
- Trockner Royal Sovereign
- Trockner New Pol
- Trockner Aurora
- Trockner Danby
- Trockner Vedette
- Trockner Auto Joe
- Trockner Ariston Thermo
- Trockner RCA
- Trockner Fisher & Paykel
- Trockner Esatto
- Trockner Gibson
- Trockner CDA
- Trockner General Electric
- Trockner Seiki
- Trockner Defy
- Trockner Jocel
- Trockner Kenmore
- Trockner Lavorwash
- Trockner Magic Chef
- Trockner Marynen
- Trockner Stirling
- Trockner Avanti
- Trockner Kunft
- Trockner Simpson
- Trockner Roper
- Trockner Mabe
- Trockner Amba
- Trockner Classique
Neueste Bedienungsanleitung fĂĽr -Kategorien-
16 August 2024
14 August 2024
13 August 2024
6 August 2024
6 August 2024
1 Juli 2024
1 Juli 2024
30 Juni 2024