Bauknecht HIK3 NN3F IN CH Oven Bedienungsanleitung

Bauknecht Ofen HIK3 NN3F IN CH Oven

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bauknecht HIK3 NN3F IN CH Oven (8 Seiten) in der Kategorie Ofen. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
EN
1
PRODUCT DESCRIPTION
CONTROL PANEL
1. Control panel
2. Shelf guides
(the level is indicated on the front
of the oven)
3. Door
4. Upper heating element/grill
5. Lamp
6. Identification plate
(do not remove)
7. Bottom heating element
(non-visible)
OVEN CONTROLS
1. SELECTION KNOB
For switching the oven on by selecting a function.
Turn to the position to switch the oven off.
2. LED THERMOSTAT / PREHEATING
Switches on during the heating process. Switches off
once the desired temperature is reached.
3. THERMOSTAT KNOB
Turn to select the temperature you require.
CONTROL KNOBS FOR COOKTOP
A. for front left hotplate.
B. for rear left hotplate.
C. for rear right hotplate.
D. for front right hotplate.
DAILY REFERENCE
GUIDE
Before using the appliance carefully read the Health and Safety guide.
THANK YOU FOR PURCHASING A
BAUKNECHT PRODUCT
To receive more comprehensive help and
support, please register your product at
www . bauknecht . eu / register
WWW
You can download the Safety Instructions
and the Use and Care Guide by visiting our
website docs . bauknecht . eu and following
the instructions on the back of this booklet.
4
3
2
1
4
3
2
1
1
2
3
6
7
5
4
1 2 CA B D3
2
ACCESSORIES
WIRE SHELF BAKING TRAY
Use to cook food or as a
support for pans, cake
tins and other ovenproof
items of cookware.
Use for cooking all bread
and pastry products, but
also for roasts, fish en
papillotte, etc.
The number and the type of accessories may vary depending on which model is purchased.
Other accessories that are not supplied can be purchased separately from the After-sales Service.
INSERTING THE WIRE SHELF
AND OTHER ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the drip tray and the
baking tray, are inserted horizontally in the same way
as the wire shelf.
REMOVING AND REFITTING THE SHELF GUIDES
To remove the shelf guides, remove the fixing
screws (if present) on both sides with the aid of a coin
of a tool. Lift the guides up and pull the lower parts
out of their seatings: The shelf guides can now be
removed.
To refit the shelf guides, first fit them back into
their upper seating. Keeping them held up, slide them
into the cooking compartment, then lower them into
position in the lower seating. Refit the fixing screws.
EN
3
FUNCTIONS
OFF
For switching off the oven.
LIGHT
To switch the oven light on/off.
BOTTOM HEATING
For slow cooking meat or vegetable stews. This
function can also be used to finish cooking sweet or
savoury foods with a very liquid consistency and to
thicken sauces. Place food on the 1st shelf.
CONVENTIONAL
For cooking any kind of dish on one shelf.
GRILL
For grilling steaks, kebabs and sausages,
cooking vegetables au gratin or toasting bread. When
grilling meat, we recommend using a drip tray to
collect the cooking juices: Position the pan on any
of the levels below the wire shelf and add 500ml
of drinking water. Preheat for 35 minutes. During
cooking the oven door must remain closed.
COOKTOP FUNCTIONS TABLE
OFF
For switching off the hotplate.
GENTLE HEAT
To allow dough to rise, to soften butter taken
from the fridge, to keep baby bottles or food warm,
also for making yoghurt, melting chocolate, etc.
This function is only available when the residual
heat indicator is on. For this function, make sure the
residual heat indicator of the desired hotplate is on.
Turn the knob to . To deselect the function, change
the position of the knob.
HEAT MAINTENANCE
To maintain a constant temperature of 6 until
the end of cooking. To select this function, turn the
knob to .
FAST BOIL
This function is used to bring water to the
boil rapidly and remains on for a preset time. At the
end of the preset time, the cooktop automatically
returns to the maximum power setting. This function
can be selected even during cooking. Important:
before selecting this function, make sure the pot
is positioned on the selected hotplate in order
to avoid any damage to the cooktop surface. The
stated performance values for this function are those
guaranteed for all glass ceramic cooktops. For this
function, place the pot on the selected hotplate and
turn the knob to . To deselect, change the position
of the knob.
MULTIZONE
This is available on the front left and rear
left hotplates. This extends the heating area of the
cooktop in order to allow the use of large, oval or
rectangular pots or cooking receptacles. To select
this function: turn the knob to and wait until
the residual heat indicator for the hotplate begins
to flash. To switch on the triple zone function (if
available), wait until the LED begins flashing quickly.
Select the power setting required by turning the knob
anticlockwise. The residual heat indicator remains on
to indicate that the cooktop is in use. To deselect, turn
the knob to by turning the knob anticlockwise.


Produktspezifikationen

Marke: Bauknecht
Kategorie: Ofen
Modell: HIK3 NN3F IN CH Oven

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bauknecht HIK3 NN3F IN CH Oven benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ofen Bauknecht

Bedienungsanleitung Ofen

Neueste Bedienungsanleitung für -Kategorien-