Bauknecht GSIP 6130/1 A+ IN Bedienungsanleitung

Bauknecht Spülmaschine GSIP 6130/1 A+ IN

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bauknecht GSIP 6130/1 A+ IN (8 Seiten) in der Kategorie Spülmaschine. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

GB -1-

-1-

-1--1-

Chart

PROGRAMS SE

PROGRAMS SEPROGRAMS SELECTION

LECTION

LECTION LECTION

BUTTON

BUTTONBUTTON

Push “Programs” button

(repeatedly) until the indicator

of the required program lights

up (see “Table of programs”

below).

STSTART/RESUME BUTTON

ART/RESUME BUTTON

ART/RESUME BUTTONART/RESUME BUTTON

Push this button to start the selected program: the

indicator lights up and goes off at the end of the

program.

When the door is opened during a washing cycle,

the cycle is temporarily paused: the Start indicator

blinks. To resume the cycle close the door and

push Start button again.

CANCEL/OFF BU

CANCEL/OFF BUCANCEL/OFF BUTTON

TTON

TTONTTON

Push this button to switch off the control panel.

If pressed when a program is running it cancels the

program ongoing draining water for 1 minute

(0:01 is shown into the display).

If pressed when the dishwasher is switched off,

it drains any possible liquids from dishwasher

(1 minute process).

(see at right

(see at right(see at right for options

for options

for options for options description)

description)

description)description)

1)1) Program data obtained in conformi

Program data obtained in conformi

Program data obtained in conformiProgram data obtained in conformity with

ty with

ty withty with European standard EN 50242,

European standard EN 50242,

European standard EN 50242, European standard EN 50242, obtained un

obtained un

obtained un obtained under normal conditions (without additional

der normal conditions (without additional

der normal conditions (without additional der normal conditions (without additional

options) and may vary depending on conditions. Differences of up

options) and may vary depending on conditions. Differences of up options) and may vary depending on conditions. Differences of up to 20 minutes a

to 20 minutes a

to 20 minutes ato 20 minutes are possible with sensor pro

re possible with sensor pro

re possible with sensor prore possible with sensor programs as a result of

grams as a result of

grams as a result ofgrams as a result of the

the

the the

appliance’s automat

appliance’s automatappliance’s automatic calibration system.

ic calibration system.

ic calibration system.ic calibration system.

2)2) Re

ReReference program for energy

ference program for energy

ference program for energyference program for energy label in compliance

label in compliance

label in compliance label in compliance with EN 50242

with EN 50242

with EN 50242 with EN 50242 regu

regu

reguregulations. - Note for T

lations. - Note for T

lations. - Note for Tlations. - Note for T

esting Institutes: for detailed

esting Institutes: for detailedesting Institutes: for detailed infor

infor

infor informati

mati

matimation

on on

on the EN/Standard loading compariso

on the EN/Standard loading comparisoon the EN/Standard loading comparison test and other tests,

n test and other tests,

n test and other tests,n test and other tests, contact the

contact the

contact the contact the following ad

following ad

following adfollowing address: “nk_c

dress: “nk_c

dress: “nk_cdress: “nk_customer@whir

ustomer@whir

ustomer@whirustomer@whirlpool.com”.

lpool.com”.

lpool.com”.lpool.com”.

3)3) The antibacterial action has been tested by the Institut P

The antibacterial action has been tested by the Institut P

The antibacterial action has been tested by the Institut PThe antibacterial action has been tested by the Institut Pasteu

asteu

asteuasteur of Lille (F

r of Lille (F

r of Lille (Fr of Lille (France), base

rance), base

rance), baserance), based on the NF EN 13697 standa

d on the NF EN 13697 standa

d on the NF EN 13697 standad on the NF EN 13697 standard of Nove

rd of Nove

rd of Noverd of November 20

mber 20

mber 20mber 2001.

01.

01.01.

TTable of programs

able of programs

able of programsable of programs

Deter-

Deter-Deter-

gent

gentgent

Consumption

ConsumptionConsumption

Drying

DryingDrying

Phase

PhasePhase

PP Pro

Pro

ProProgr

grgram

amams

ss Available

Available

AvailableAvailable

options

optionsoptions Loading instructions

Loading instructions

Loading instructionsLoading instructions

Litres

LitresLitres kWh

kWh

kWhkWh Minutes

Minutes

MinutesMinutes1)

1)1)

Sensor

SensorSensor 40-70°C

40-70°C

40-70°C40-70°C Delay

Multizone

Antibacterial

rinse

Recommended program for routine

washes, with dried-on food

(e.g. EN 50242). X 7-14 1.00-1.60 70-155 Full

Pre

PrePre-W

-W

-W-Wash

ash

ashash cold

cold

coldcold Delay

Multizone Crockery to be washed later. — 4.0 0.03 14 NO

Glasses

GlassesGlasses 40°C

40°C

40°C40°C Delay

Multizone Light soiling, for example glasses and

cups. X 10.0 0.85 100 Light

Quickwash

QuickwashQuickwash 45°C

45°C

45°C45°C Delay

Multizone Lightly soiled crockery, with no

dried-on food. X 11.0 0.80 30 NO

55 Bio Normal

Bio Normal

Bio NormalBio Normal 2)

2)2) 50°C

50°C

50°C50°C Delay

Multizone

Antibacterial

rinse

Normally soiled crockery.

Energy-saving program. X 11.0 1.03 170 Full

Daily

DailyDaily 60°C

60°C

60°C60°C Delay

Multizone

Antibacterial

rinse

Normally soiled crockery. X 10.0 1.30 80 Full

5019 496 01796

5019 496 017965019 496 01796

BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULL

BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLBEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULL

Y READ

Y READ Y READ

THIS QUICK REFERENCE GUIDE AND THE ASSEMBL

THIS QUICK REFERENCE GUIDE AND THE ASSEMBLTHIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!

Y INSTRUCTIONS!

Y INSTRUCTIONS!Y INSTRUCTIONS!

Options and display description

SAL

SALSALT INDICA

T INDICA

T INDICAT INDICATOR

TOR

TORTOR

When lit (at the end of the cycle),

the salt reservoir needs to be

refilled.

MUL

MULMULTIZONE

TIZONE

TIZONETIZONE

Allows you to choose the washing

zones. Press this button (repeatedly)

to select the wash zones:

both racks

only lower rack

only upper rack

- indicator lits T

TTABLET

ABLET

ABLETABLET SETTING

SETTING

SETTING SETTING

This setting allows to

optimize the cycle

performances according

the type of detergent

used. Push the Tablet

button for 3 seconds (until

the indicator lights up) if

you are using the

combined detergents in

tablet (rinse aid, salt and

detergent in 1 dose). If you

are using powder

detergent or liquid

detergent, the Tablet

indicator on the control

panel has to be off.

DELA

DELADELAYED ST

YED ST

YED STYED START

ART

ART ART

BUTTON

BUTTONBUTTON

Push the button

(repeatedly) to delay the

start of the program.

Adjustable from 1 to 24

hours. With each press of

the button, the delayed

start indicator increases

by one hour and after 24

restarts from 0. Then

press the START button.

The dishwasher will start

after the set time.

RINSE AID INDICATOR

RINSE AID INDICATORRINSE AID INDICATOR

When lit (at the end of the cycle),

the rinse aid dispenser needs to

be refilled.

WASH TIME DISPLAY

WASH TIME DISPLAYWASH TIME DISPLAY

Indicated the cycle duration and the remaining time (h:min). With “Delayed start” selected it indicates

the time remaining until program start (h.00) - below 1h (0:min).

If “Fx Ey” messages appears on the display, see page 6 - chapter “What to do if...”.

ANTIBA

ANTIBAANTIBACTERIAL R

CTERIAL R

CTERIAL RCTERIAL RINSE

INSE

INSEINSE 3)

3)3)

This function activates an

antibacterial rinse at the end of the

wash cycle, guaranteeing a further

reduction of bacteria. Press the

button to activate or deactivate the

function. This function can be used

with the programs indicated in the

table of programs. The dishwasher

door must be kept shut for the entire

duration of the program in order to

guarantee reduction of bacteria. If

the door is opened the indicator lamp

starts flashing.

THE CONTROL P

THE CONTROL PTHE CONTROL PANEL OF THIS

ANEL OF THIS

ANEL OF THIS ANEL OF THIS DISHW

DISHW

DISHWDISHWASHER ACTIV

ASHER ACTIV

ASHER ACTIVASHER ACTIVA

AATES PUSHING

TES PUSHING

TES PUSHING TES PUSHING

ANY BUTTON EXCEPT CANCEL/OFF BUTTON.

ANY BUTTON EXCEPT CANCEL/OFF BUTTON.ANY BUTTON EXCEPT CANCEL/OFF BUTTON.

FOR ENERGY SA

FOR ENERGY SAFOR ENERGY SAVING THE CONTROL P

VING THE CONTROL P

VING THE CONTROL PVING THE CONTROL PANEL DEACTIV

ANEL DEACTIV

ANEL DEACTIVANEL DEACTIVA

AATES

TES

TES TES

AUTOMA

AUTOMAAUTOMATICALL

TICALL

TICALLTICALLY AFTER 30 SECONDS IF NO

Y AFTER 30 SECONDS IF NO

Y AFTER 30 SECONDS IF NO Y AFTER 30 SECONDS IF NO CYCLE HAS ST

CYCLE HAS ST

CYCLE HAS STCYCLE HAS STARTED.

ARTED.

ARTED.ARTED.

Quick reference guide

Quick reference guideQuick reference guide

GB -2-

-2-

-2--2-

First time use

1- salt reservoir

2- rinse aid dispenser

3- detergent dispenser

4- racks system

5,6,7,8- available functions on the panel

9- filters

10- spray arms

WWater hardness should be set only

ater hardness should be set only

ater hardness should be set only ater hardness should be set only

before the first wash or if water

before the first wash or if water before the first wash or if water

hardness has been changed

hardness has been changedhardness has been changed

1Visual indicator

(depending

on the model).

Unscrew cap.

Fill the salt reservoir with water

before the first wash only.

(depending on the model)

The salt level indicator lamp may remain lit

at the end of several wash cycles. If the

water hardness level falls within category

(soft), no salt is required.

Salt indica

Salt indicaSalt indicator on the con

tor on the con

tor on the contor on the control panel

trol panel

trol paneltrol panel Salt indicator on the s

Salt indicator on the s

Salt indicator on the sSalt indicator on the salt reservoir cap

alt reservoir cap

alt reservoir capalt reservoir cap

The indicator lamp lights up when SALT

NEEDS TO BE ADDED. green: OK. clear: NEEDS TO

BE ADDED

Daily check

Filling the salt reservoir -

Filling the salt reservoir - Filling the salt reservoir - Dissolve limescale (not necessary if water hardness level is set to “soft”!)

- Press and hold together Pro

Pro

ProProgram

gram

gramgrams

ss and CANCEL/Off

CANCEL/Off

CANCEL/OffCANCEL/Off buttons for minimum 3 seconds.

- The current water hardness setting will be visible on the display.

- Press the Progr

Progr

ProgrProgram

amams

ss button to increase setting. Value range goes from 1 to 7 (when the level reaches 7, the next press of

the start button will set the level back to 1).

- Wait 30 seconds (control panel switches off) or press Start/Resume

Start/Resume

Start/ResumeStart/Resume button to save setting.

Add salt

Add salt Add salt (never add detergent!)

min. 0.8 kg / max. 1 kg

Screw on the cap.

Salt residual

around the cap

need to be

removed. Some

salt reservoir have

a level indicator

integrated in the

cap (see below

how to check).

At first time use,

At first time use,At first time use, the salt reservoir has to

the salt reservoir has to

the salt reservoir has to the salt reservoir has to be filled independently from water h

be filled independently from water h

be filled independently from water hbe filled independently from water hardness level

ardness level

ardness level ardness level (see description below in step 1 “Daily check”).

1.1. 2.

2.2.Ask your water supply company what the water hardness

water hardness

water hardnesswater hardness is... ...enter this value on

your dishwasher Suggestions for detergent use

German

degrees °dH French

degrees °fH English

degrees °eH Water hardness

level Insert value is shown

in the display Gel or Powder

(rinse aid and salt) Tablets

0 - 5 0 - 9 0 - 6.3 Soft 1

go to step 1

(see “Daily

check”)

6 - 10 10 - 18 7 - 12.6 Medium 2

11 - 15 19 - 27 13.3 - 18.9 Average 3

16 - 21 28 - 37 19.6 - 25.9 Medium-hard 4 if water is

HARD extra salt

needs to be added

(go to step 1,

“Daily check”)

22 - 28 38 - 50 26.6 - 35 Hard 5

29 - 35 51 - 63 35.7 - 44.1 Very hard 6

36 - 50 64 - 90 44.8 - 62.4 Extremely hard 7

Water hardness level is factory

set for medium-hard water

(level 4).

Even if you use tablets which

include salt functionality, you

must still add regeneration salt

since such detergents are not

effective enough at softening

hard water.

How to set water hardness in order to always assure the best cleaning results

How to set water hardness in order to always assure the best cleaning resultsHow to set water hardness in order to always assure the best cleaning results

GB -3-

-3-

-3--3-

Daily check

Check the rinse aid indicator to check the level

into the dispenser.

(depending on the model)

Rinse aid indicator on the control panel

Rinse aid indicator on the control panelRinse aid indicator on the control panel Rinse aid indicator on th

Rinse aid indicator on th

Rinse aid indicator on thRinse aid indicator on the dispenser

e dispenser

e dispensere dispenser

The indicator lamp lights up when RINSE AID NEEDS

TO BE ADDED. dark: OK. clear: NEEDS TO BE ADDED

Only use rinse aids recommended for use in domestic dishwashers. Immedia

Immedia

ImmediaImmediately

tely

telytely wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the

appliance.

If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). Plastic dishes have more difficulty

drying and a higher rinse aid setting will not improve the situation.

Detergents with rinse aid incorporated may be effective only with longer programs. In the case of shorter programs, detergent residue may be a problem (if necessary, use powder detergent). Detergents with

rinse aid incorporated tend to form excess suds.

Daily use

Adding detergent -

Adding detergent - Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations

Open the cover A

(press the dedicated button).

Only fill the

detergent dispenser

prior to starting a

wash program.

Shut the cover

by pressing dedicated ribs.