Bauknecht 858350903010 Bedienungsanleitung

Bauknecht Waschmaschine 858350903010

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Bauknecht 858350903010 (12 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
a
b
c
1
d
e
f
g
2
3
4
5
6
7
8
9
11
10
13
14
12
GB 1
INTENDED USE
This washing machine is exclusively destined to wash
and spin machine washable laundry in quantities
which are usual for private households.
Observe the instructions given in these
Instructions for Use and the Programme Chart
when using the washing machine
Keep these Instructions for Use and the
Programme Chart; if you pass on the washing
machine to another person, also give him/her
Instructions for Use and Programme Chart.
SAFETY AND GENERAL RECOMMENDATIONS
1. Safety instructions
The washing machine is
appropriate for indoor use only.
Do not store flammable fluids
near the appliance
Children must not be allowed to
play with the washing machine
or to climb into the drum.
The washing machine can be
operated by children from the
age of 8 years up, as well as by
people with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided they are supervised or
instructed regarding the safe use
of the washing machine and they
understand the dangers resulting
from the use.Children must not
play with the washing machine.
Care and maintenance works on
the washing machine must not
be carried out by children without
being supervised.
Do not operate the washing
machine at temperatures below
5°C.
For freestanding models: if you
want to place a dryer on top
of your washing machine, first
contact our After-Sales Service
or your specialist dealer to
verify if this is possible. This
is only admitted if the dryer is
fixed on the washing machine
by using an appropriate
stacking kit available through
our After-Sales Service or your
specialist dealer.
Do not leave the appliance
plugged in when not in use.
Turn off the tap when not in
use.
Before any cleaning and
maintenance switch off the
machine or disconnect it from
the mains supply.
Never open the door forcibly or
use it as a step.
If necessary, the power cable
may be replaced with an
identical one obtained from our
After-Sales Service. The power
cable must only be replaced by
a qualified technician or by our
After-Sales Service.
If your washing machine is a
built-in model:
do not operate it unless it is
built-in
you must not remove the up
cover.
2. Packing
The packaging materials are 100% recyclable
and bear the recycling symbol . Adhere to local
regulations when disposing of packaging material.
3. Disposing of packaging and old
washing machines
The washing machine is built from reusable
materials. It must be disposed of in compliance
with current local waste disposal regulations.
Before scrapping, remove all detergent residues
and cut off the power cable so that the washing
machine is made unusable.
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE). By
ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate waste
handling of this product.
GB 2
The symbol on the product, or on the
documents accompanying the product, indicates
that this appliance may not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. Disposal
must be carried out in accordance with local
environmental regulations for waste disposal.
For more detailed information about treatment,
recovery and recycling of this product, please
contact your local city office, your household waste
disposal service or the shop where you purchased
the product.
4. Frost
Do not place the washing machine in a room
prone to frost. If you must, make sure that the
washingmachine is completely drained after each
wash:
Remove inlet hose(s) from water tap and let the
water flow out completely.
Remove drain hose from siphon or handwash
basin and let the water flow out completely.
Empty residual water inside the machine by
following the instructions in the chapter “Draining
Residual Water”; for freestanding models: tilt the
appliance forward with two persons to let the rest
water flow out completely.
5. EC Declaration of Conformity
The appliance conforms to the following European
Standards: 2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility
Directive.
The Manufacturer is not liable for any damage to
laundry resulting from inadequate or incorrect fabric
care instructions which have been provided with the
garment or article.
BEFORE USING THE WASHING MACHINE
1. Removing the packaging and
inspection
After unpacking, make sure that the washing
machine is undamaged. If in doubt, do not use the
washing machine. Contact After-Sales Service or
your local retailer.
Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children, as
they are potentially dangerous.
If the appliance was exposed to the cold prior to
delivery, keep it at room temperature for a few
hours before operating.
2. Remove the transport bolts
The washing machine is fitted with transport
bolts to avoid any possible damage to the interior
during transport. Before using the machine, it is
imperative that the transport bolts are removed.
After their removal, cover the openings with the 4
enclosed plastic caps.
3. Install the washing machine
Remove the protective film from the control panel
(if available on your model).
Move the appliance without lifting it by the worktop.
Install the appliance on a solid and level floor
surface, preferably in a corner of the room.
Make sure that all four feet are stable and resting
on the floor and then check that the washing
machine is perfectly level (use a spirit level).
In case of wooden or so-called “floating floors” (for
instance certain parquet or laminate floors), place
the appliance on a sheet of plywood at least 60 x
60 cm wide/deep and at least 3 cm thick which is
secured to the floor.
Make sure that the ventilation openings in the
base of your washing machine (if available on your
model) are not obstructed by a carpet or other
material.
4. Water inlet
Connect the water inlet hose(s) to the drinking
water supply in accordance with the regulations of
your local water company.
For models with one inlet valve: cold water
For models with two inlet valves: cold AND hot
water, or cold water only (see chapter “Installation
Guide”).
Water tap: 3/4” threaded hose connector
Water pressure (flow pressure): 100-1000 kPa
(1-10 bar).
Use only new hoses to connect the washing
machine to the water supply. Used hoses must not
be used and should be discarded.
For models with hot fill: the hot water inlet
temperature must not exceed 60°C.
5. Drain
Firmly connect the drain hose to the siphon, or
another outlet for drain water.
If the washing machine is connected to an
integrated drainage system, ensure the latter is
equipped with a vent to avoid simultaneous load-
ing and draining of water (siphoning effect).
6. Electrical connection
Electrical connections must be carried out by a
qualified technician in compliance with the manu-
facturer’s instructions and current standard safety
regulations.
Data regarding voltage, power consumption
andprotection requirements is given on the inside
of the door.
The appliance must be connected to the mains
by means of a socket with an earth connection in
accordance with current regulations. The washing
machine must be earthed by law. The manufac-
turer declines all liability for damage to property
or injury to persons or animals due to non-compli-
ance with the directions given above.
Do not use extension leads or multiple sockets.
Access to the mains plug or disconnection from
the mains supply via a double-pole switch must be
ensured at all times after the installation.
Do not operate the washing machine if it has been
damaged during transport. Inform the After-Sales
Service.
Mains cable replacement is only to be carried out
by After-Sales Service.
When using a residual current circuit breaker
(RCCB), only use a model marked with .


Produktspezifikationen

Marke: Bauknecht
Kategorie: Waschmaschine
Modell: 858350903010
Breite: 595 mm
Tiefe: 555 mm
Gewicht: 68000 g
Produktfarbe: Weiß
Steuerung: Buttons, Rotary
Höhe: 820 mm
Eingebautes Display: Ja
Verpackungsbreite: 640 mm
Verpackungstiefe: 600 mm
Verpackungshöhe: 880 mm
Geräteplatzierung: Integriert
Kabellänge: 1.5 m
Waschprogramme: kalt
Maximale Schleuderdrehzahl: 1400 RPM
Startzeitvorwahl: Nein
Luftschallemission (Schleudern): 72 dB
Luftschallemmission (Waschen): 50 dB
Energieeffizienzklasse (alt): A++
Jährlicher Energieverbrauch Waschen: 194 kWh
Verstellbare Füße: Ja
Ladetyp: Frontlader
Anschlusswert: 2300 W
Stromstärke: 10 A
Energieverbrauch Reinigung: 0.91 kWh
Nennkapazität: 7 kg
Türanschlag: Links
Türfarbe: Weiß
Kindersicherung: Ja
Wasserverbrauch pro Zyklus: 52 l
Jährlicher Wasserverbrauch Waschen: 9900 l
Waschwirkungsklasse: A
Schleuder-Klasse: B
Ladungsausgleichsystem: Nein
Aquastop Funktion: Ja
Benutzerdefinierte Panel-Bereitschaft: Ja
Türverkleidung enthalten: Nein
Bruttogewicht: 72000 g

Brauchst du Hilfe?

Wenn Sie Hilfe mit Bauknecht 858350903010 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Waschmaschine Bauknecht

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung für -Kategorien-