Barco R9829997 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Barco R9829997 (16 Seiten) in der Kategorie Beamerzubehör. Dieser Bedienungsanleitung war fĂŒr 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
ENABLING BRIGHT OUTCOMES
Installation Manual
TLD+ Zoom Lens Safety Cable
Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
3
When to use the safety cable?
The lens safety cable must be used in any circumstance where the projector is mounted above people. Do this
to secure the mounted lens in the lens holder.
Why replace the existing safety cable?
Up until recently, all lenses for event projectors weighed 7 kg or less. The lens safety cable included with every
events projector was able to secure every single lens available in the Barco gamma.
Due to the release of the TLD+ Ultra 0.8 1.16 lens, there are now lenses available that weigh more than 11–
kg, which this safety cable can no longer support in a safe fashion.
In order to safely handle all lenses that are available, a new safety cable must be used, which is installed on
the lens in a new fashion.
Content of the kit
‱Safety Cable (750 mm, Ø3 mm)
‱Cable clamp M4
‱Shackle 7x70 mm
‱20 x Cable clip (16x16 mm, Ø4 mm)1
R5906099 /03 TLD+ Zoom Lens Safety Cable
The lens safety
cable
1
1: Only four pieces are needed to assemble the safety cable to a lens. When the safety cable is used on another lens, you should not
remove the cable clips. Instead, use four new ones. There are enough cable clips in the kit to secure up to five different lenses.

Produktspezifikationen

Marke: Barco
Kategorie: Beamerzubehör
Modell: R9829997

Brauchst du Hilfe?

Wenn Sie Hilfe mit Barco R9829997 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beamerzubehör Barco

Bedienungsanleitung Beamerzubehör

Neueste Bedienungsanleitung fĂŒr -Kategorien-