Balay 3TS60106A Bedienungsanleitung

Balay Waschmaschine 3TS60106A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Balay 3TS60106A (16 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 65 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

1 2 3 4 5 6

End of programme when ...

... the status indicator flashes.6](spin) - (end)b

Interrupting the programme

Programmes at high temperatures:

– Cool washing: Select .5 (rinse)

– Select .inicio (start)

Programmes at lower temperatures:

– Select or .6(spin) 4 plus (empty)

– Select .inicio (start)

Changing the programme, if ...

... you have selected the wrong programme by mistake:

– Reselect the programme.

– Select inicio (start). The new programme starts from

the beginning.

Correct installation according to the

separate Installation instructions.

Checking the machine

– Never use a damaged machine.

– Inform the after-sales service.

Connecting the mains

plug

Make sure your hands are dry.

Take hold of the plug only.

Turning the tap on

Compartment II: Detergent for the main wash, water softener,

bleach, stain remover

Sorting and loading laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, soiling and temperature.

Do not exceed the maximum load .apage 7

Observe the important information page 6.a

Insert large and small items of laundry.

Close the washing machine door. Take care not to trap items of laundry

between the washing machine door and the rubber seal.

Add detergent and care products

Measure accordingly:

Amount of laundry, soiling, water hardness (ask your water supply

company) and manufacturer's instructions.

Pour liquid detergent into the appropriate dispenser and place in the drum.

Your washing machine

Congratulations ä You have opted for a modern, high-quality

domestic appliance manufactured by Balay. This washing machine

is distinguished by its economical water and energy consumption.

Each machine that leaves our factory has been inspected thoroughly

to ensure that it functions properly and is in perfect condition.

For further information and a selection of our products go to our web

site: www.balay.es

Environmentally friendly waste disposal 

All packaging must be disposed of in accordance with

environmental guidelines.

This appliance is certified in accordance with European Directive

2002/96/EC on waste electrical and electronic equipment (WEEE).

This directive provides the framework for the EU-wide collection and

reuse of used appliances.

Intended use

Contents Page

ʋIntended use .......................................................................................1

ʋProgrammes .......................................................................................1

ʋSetting and adjusting the programme ...........................................3

ʋWashing ...........................................................................................3/4

ʋAfter washing ......................................................................................4

ʋIndividual settings ..............................................................................5

ʋImportant information ........................................................................6

ʋOverview of programmes ................................................................7

ʋSafety instructions .............................................................................8

ʋConsumption values .........................................................................8

ʋCare .....................................................................................................9

ʋInformation to indicator lights ..........................................................9

ʋMaintenance .................................................................................... 10

ʋWhat to do if... .................................................................................. 11

Environmental protection/Conservation tips

– Always fill the washing machine with a maximum amount of

laundry for the relevant programme.

– Wash normally soiled washing without a pre-wash (model-

dependent).

– Instead of choose the algodón/algodão (cottons) 90 °C,

programme . algodón/algodão eco (cottons eco) 60 °C

Comparable cleaning result with significantly lower energy

consumption.

– Measure the detergent according to the manufacturer's

instructions and water hardness.

– If the laundry is then dried in the tumble dryer, select the spin

speed according to the instructions of the dryer manufacturer

( ).model-dependent

Preparation Before washing for the first time

Wash once without any laundry page 9.a

Setting and adjusting programmes

Programme selector Start

Programme selector for

switching the machine on

and off and for selecting the

programme. Can be turned

in either direction.

Programmes

Detailed overview of programmes .apage 7

algodón/algodão (cottons) hard-wearing fabrics

algodón/algodão eco

(cottons eco)

hard-wearing fabrics

algodón/algodão + prelav.

(cottons + prewash)

hard-wearing fabrics prewash,

at 30 °C

5 (rinse) with subsequent spin cycle

6 (spin) laundry washed by hand

4 plus (empty) the rinsing water

ÿ/ lana/lã (wool) hand/machine-washable

textiles

delicado (delicates) delicate washable fabrics

sintéticos (easy-care) easy-care fabrics

Additional function Individual a

settings, .page 5

Select inicio (start)

Washing

Removing the washing

Open the washing machine door and remove the washing.

If (without final spin) is active: Turn the flot (no spin)

programme selector to 4 plus (empty) or select the spin

speed (model-dependent).

Select .inicio (start)

– Remove any foreign objects - risk of rusting.

– Leave the washing machine door and detergent

drawer open so that any residual water can

evaporate.

Turning the tap off

Switching off

Turn the programme selector to .stop (off)

Washing

Detergent drawer with

compartments , , III~

Washing machine

door

Compartment ~: Fabric softener, starch

Compartment I: Detergent for pre-wash ( )model-dependent

ʋfor use in the household only,

ʋfor machine-washable fabrics and hand-washable wool

in detergent solution,

ʋto be operated with cold drinking water and commer-

cially available detergents and care products which are

suitable for use in washing machines.

– Do not leave children unattended near the

washing machine.

– The washing machine is not to be used by

children or persons not familiar with the

operating instructions.

– Keep pets away from the washing machine.

Dilute thick fabric softener and fabric conditioner with water.

This prevents blockages.

Individual settings

ʑAdditional functions aand overview of programmes, see page 7.

flot (no spin) Clothing remains immersed in the last rinse water.

]centrif. Reduce spin speed .(values depending on model)

ʑ inicio (start)

For starting the programme.

Important information

Protecting the washing and the machine

– When determining the dosage of all washing powders, additives and cleaning agents, you

must follow the manufacturer's instructions.

– Empty pockets.

– Look out for metal items (paperclips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Washing with varying degrees of soiling

Wash new items of clothing separately.

light Do not pre-wash.

If required, pretreat stains.

Select programme .algodón/algodão eco (cottons eco) 60 °C

heavy Load less washing. Select programme algodón/algodão + prelav.

(cottons + prewash) 60°C.

Starching Washing must not be treated with fabric softener

Starching is possible in all wash programmes if liquid starch is used. Pour the starch in

accordance with the manufacturer's instructions into fabric softener compartment ~ (rinse first

if necessary).

Dyeing / Bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel.

Always follow the dye manufacturer's instructions! Do use the washing machine for not

bleaching clothes!

Additional

function*

Drum

Control panel

Service flap for

detergent solution

pump

Status

indicators

(*spin speed depending on model)

start

þ]wash

5rinse

6spin

bend

Overview of programmes a refer to the table of consumption values on page 8 and notes on page 6.

Programmes °C max. Type of laundry Additional functions; information

algodón/algodão (cottons) frio (cold), 20, 40,

60, 90 °C

6 kg Hard-wearing fabrics, heat-resistant fabrics made of

cotton or linen ]centrif., flot (no spin)

algodón/algodão eco

(cottons eco) 40, 60 °C

algodón/algodão + prelav.

(cottons + prewash) 60 °C

sintéticos (easy-care) frio (cold), 40 °C 3 kg Easy-care fabrics made of cotton, linen, synthetic

fibres or blended fabrics ]centrif., flot (no spin)

delicado (delicates) frio (cold)

2 kg

For delicate, washable fabrics, e.g. made of silk, satin,

synthetic fibres or blended fabrics (e.g. curtains)

]centrif., flot (no spin);

No spin between rinse cycles

ÿ / lana/lã (wool) frio (cold), Hand or machine-washable fabrics made of wool or ä

containing wool

Particularly gentle wash programme to prevent

shrinkage of laundry. Longer programme breaks

(fabrics rest in the detergent solution)

Additional programmes (rinse), (spin), plus (empty)5 6 4

Programmes without prewash - add detergent to compartment , programmes with prewash - distribute the detergent between compartments and II I II

( ).depending on model

9306 / 9000895776

*895776* 3TS60106A ...

Balay Electrogeräte GmbH

Carl Wery Str. 34ä

81739 Munich / Alemania

Safety instructions

– Read the instruction manual and installation instructions and all other information enclosed

with the washing machine and act accordingly.

– Retain the documents for subsequent use.

Risk of electric shock – Never pull the cable to disconnect the mains plug.

– Never insert/disconnect the mains plug with damp hands.

Danger to life For worn-out appliances:

– Disconnect the mains plug.

– Sever the mains cable and discard along with the plug.

– Destroy the lock on the washing machine door. This will prevent

children from locking themselves in and risking their lives.

Danger of suffocation – Keep packaging, film and packaging parts out of the reach of

children.

Risk of poisoning – Keep detergents and care products out of the reach of children.

Risk of explosion – Items of laundry pretreated with cleaning agents containing

solvents, e.g. stain remover/cleaning solvent may cause an

explosion after being loaded into the washing machine.

Rinse items of laundry thoroughly by hand beforehand.

Risk of injury – The washing machine door can become very hot.

– Be careful when draining hot detergent solution.

– Do not climb onto the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum if it is still rotating.

– Be careful when opening the detergent drawer while the machine

is in operation.

Consumption values depending on model

Programme Load Electricity Water*** *** Programme

duration***

algodón/algodão eco

(cottons eco) 40 °C* 6 kg 0,85 kWh 58 l 01:50 h

algodón/algodão (cottons) 60 °C* 6 kg 1,40 kWh 57 l 02:05 h

algodón/algodão (cottons) 90 °C 6 kg 2,10 kWh 62 l 02:05 h

sintéticos (easy-care) 40 °C* 3 kg 0,55 kWh 48 l 01:15 h

delicado (delicates) frío (cold) 2 kg 0,28 kWh 48 l 00:44 h

ÿ / lana/lã (Wool) frío (cold) 2 kg 0,20 kWh 32 l 00:53 h

* Programme setting for testing in accordance with valid standard EN60456.

Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed

( ).depending on model

Programme Load Annual energy

consumption

Annual water

consumption

algodón/algodão eco (cottons eco) 40/60 °C** 6/3kg 193 kWh 9600 l

** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).

*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-

perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional

functions.

Care

Before washing for the first time

Do not load any laundry into the machine. Turn on the tap. Add the following to

compartment :II

– approx. 1 litre water

– detergent (dosage according to the manufacturer's instructions for light soiling and the

appropriate degree of water hardness)

Set the programme selector to algodón/algodão (cottons) 60 °C and select inicio (start).

At the end of the programme, turn the programme selector to .stop (off)

Machine housing, control panel

– Wipe with a soft, damp cloth.

– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).

– Remove detergent and cleaning agent residue immediately.

– Do not clean with a jet of water.

Cleaning the detergent drawer and housing...

...if it contains detergent or fabric softener residues.

1. Pull the drawer out, press down the insert and fully remove the drawer

from the housing.

2. To remove the insert: press the insert upwards from below with your

finger.

3. Clean the detergent dispenser tray and insert with water and a brush and

dry it. Also remove any detergent or fabric softener residues in the

housing.

4. Attach the insert and engage (connect the cylinder to the guide pin).

5. Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can

evaporate.

Washing drum and rubber seal

Wipe the inside of the rubber seal dry with a cloth. Leave the washing machine door open so

that the drum can dry out. Rust stains - use chlorine-free cleaning agent, not steel wool.

Descaling Ensure there is no laundry in the machine

Descale the appliance according to the descaler manufacturer's instructions. This should not

be necessary if the correct dosage of detergent is used.

Information to indicator lights

Indicator lights for status displays and/or buttons flash:

Indicator lights

5c(rinse) and

þü(wash) flash

Close the washing machine door properly; laundry may be caught.

Indicator lights

6c(spin) and

þü(wash) flash

Open the tap completely, supply hose kinked or trapped;

Clean the filter , Water pressure too low.apage 10

Indicator lights

6c(spin) and

5c(rinse) flash

Detergent solution pump blocked; Clean the detergent solution pump

apage 10.

Drainage hose/waste pipe blocked; Clean the drainage hose at the

siphon .apage 10

Indicator light

5c(rinse) flashes

Motor fault. Call the after-sales service.

All indicator lights flash Turn off the tap and call the after-sales service.

–Risk of electric shock.

Disconnect the mains plug.

– No solvents.Risk of explosion.

Maintenance

Detergent solution pump

Turn the programme selector to and disconnect the mains plug.stop (off)

1. Open and remove the service flap.

2. For models with a drainage hose: Remove the drainage hose from the retainer and pull it

from the housing. Remove the container.

Remove the sealing cap, allow the detergent solution to flow out.

Replace the sealing cap and place the drainage hose in the retainer.

2* For models without a drainage hose: Carefully unscrew the pump cover until the

detergent solution begins to flow out. When the service flap is half full, close the pump cover

and empty the service flap. Repeat the above steps until all the detergent solution has

completely drained out.

3. Carefully unscrew the pump cover (residual water).

4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent

solution pump must rotate).

5. Replace the pump cover and screw it in place tightly.

6. Place the service flap back on and close.

To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into

compartment and start the programme.II 4 plus (empty)

Drainage hose at the siphon

Turn the programme selector to and disconnect the mains plug.stop (off)

1. Loosen the hose clamp, carefully remove the drainage hose (residual water).

2. Clean the drainage hose and siphon connecting piece.

3. Reattach the drainage hose and secure the connection with the hose clamp.

Filter in the water supply

Reduce the water pressure in the supply hose:

1. Turn off the tap.

2. Select any programme (except for ).6 4 (spin) // plus (empty)

3. Select . Let the programme run for approximately 40 seconds.inicio (start)

4. Turn the programme selector to . Disconnect the mains plug.stop (off)

Clean the filter:

1. Depending on model:

Disconnect the hose from the tap.

Clean the filter using a small brush.

and/or for Standard and Aqua-Secure models:

Remove the hose on the rear of the appliance,

Remove the filter with pliers and clean.

2. Connect the hose and check for leaks.

–Risk of scalding.

Allow the detergent solution to cool down.

– Turn off the tap.

What to do if...

Water is leaking out. – Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

ʑNo water supply.

Detergent not dispensed.

– not selected?inicio (start)

– Tap not turned on?

– Filter blocked? Clean the filter a page 10.

– Supply hose kinked or trapped?

ʑWashing machine door cannot

be opened.

– Safety function active. Wait approx. 2 minutes.

– (without final spin) selected? flot (no spin) a page 3, 4.

ʑProgramme does not start. – selected?inicio (start)

– Washing machine door closed?

ʑDetergent solution is not

drained.

– (without final spin) selected? flot (no spin) a page 3, 4.

– Clean the detergent solution pump a page 10.

– Clean the waste pipe and/or drainage hose.

ʑWater not visible in the drum. – Not a fault - water below the visible area.

ʑUnsatisfactory spin result.

Laundry wet/too damp.

– Not a fault - the unbalanced-load detection system has cancelled the spin

cycle because of uneven distribution of the laundry.

Distribute small and large items of laundry evenly inside the drum.

– Too low a speed selected? .a page 5

ʑSpin cycle performed several

times.

– Not a fault - unbalanced load detection system adjusts the imbalance.

ʑResidual water in the

compartment for care

products.

– Not a fault - the action of the care product is not affected.

– Clean the insert if necessary .a page 9

ʑOdour formation in the

washing machine.

– Run programme without laundry. Use algodón/algodão (cottons) 90 °C

standard detergent.

ʑFoam escaping from the

detergent drawer.

– Too much detergent used?

If foam is escaping from the detergent drawer:

Mix 1 tablespoon of fabric softener with ½ litre of water and pour into

compartment II (not with outdoor or down fabrics).

– Reduce the detergent dosage for the next wash cycle.

ʑIntense noise formation,

vibrations and “walking”

during the spin cycle.

– Are the appliance feet fixed?

Secure the appliance feet .a Installation instructions

– Transportation safety devices removed?

Remove the transportation safety devices .a Installation instructions

ʑNoises during spin and drain

cycles.

– Clean detergent-solution pump apage 10.

ʑThe indicator lights do not

function during operation.

– Power cut?

– Fuses tripped? Reset/change the fuse.

– If the fault occurs repeatedly, call the after-sales service.

ʑProgramme sequence longer

than usual.

– Not a fault - unbalanced load detection system adjusts imbalance by

repeatedly distributing the laundry.

– Not a fault - foam detection system active - adds an additional rinse cycle.

ʑDetergent residues on the

laundry.

– Occasionally, phosphate-free detergents contain water-insoluble residues.

– Select 5 (rinse) or brush out the laundry after washing.

If you cannot correct a fault yourself (switching on/off) or a repair is required:

– Turn the programme selector to and remove the mains plug from the socket.stop (off)

– Turn off the water supply and call the after-sales service a Installation instructions.

Instruction manual en

Washing

machine

Observe the safety instructions on page 8!

Read these instructions and the separate

installation instructions before operating

the washing machine.

Produktspezifikationen

Marke:	Balay
Kategorie:	Waschmaschine
Modell:	3TS60106A
Breite:	597 mm
Tiefe:	590 mm
Gewicht:	68000 g
Produktfarbe:	Weiß
Höhe:	847 mm
Eingebautes Display:	Nein
Paketgewicht:	70000 g
Stromverbrauch (Standardbetrieb):	2300 W
Geräteplatzierung:	Freistehend
Kabellänge:	1.6 m
Waschprogramme:	Hygiene/anti-allergy, Black
Maximale Schleuderdrehzahl:	1000 RPM
Luftschallemission (Schleudern):	74 dB
Luftschallemmission (Waschen):	58 dB
Energieeffizienzklasse (alt):	A+
Ladetyp:	Frontlader
Stromstärke:	10 A
Energieverbrauch Reinigung:	1.02 kWh
Nennkapazität:	6 kg
Trommelmaterial:	Edelstahl
Türanschlag:	Links
Wasserverbrauch pro Zyklus:	47 l
Waschwirkungsklasse:	A
Schleuder-Klasse:	C
Ladungsausgleichsystem:	Ja
Energiebedarf:	220 - 240V; 50Hz
Zykluszeit (max.):	135 min
Minimale Schleuderdrehzahl:	600 RPM
Verpackungsabmessungen (BxTxH):	660 x 650 x 900 mm
Schaumkontrollsystem:	Ja
Trommelvolumen:	53 l