Axis Q1659 35MM F/2 Bedienungsanleitung

Axis Überwachungskamera Q1659 35MM F/2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Axis Q1659 35MM F/2 (4 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
ZER
OFF
MF
●❶
●
❷
2.3
0.7 2
6.5
22 2211 11
f t
m
●
❹
●
❸
Infinity compensation mark
Distance index
Thank you for purchasing a Canon product.
EF35mm f/2 IS USM is a wide-angle single focus lens that provide high
image quality.
● “IS” stands for Image Stabilizer.
● “USM” stands for Ultrasonic Motor.
Safety Precautions
● Do not look at the sun or a bright light source through the lens
or camera. Doing so could result in loss of vision.
Looking at the sun directly through the lens is especially hazardous.
● Whether it is attached to the camera or not, do not leave the
lens under the sun without the lens cap attached. This is to
prevent the lens from concentrating the sun’s rays, which could cause
a fire.
Handling Cautions
● If the lens is taken from a cold environment into a warm one,
condensation may develop on the lens surface and internal
parts. To prevent condensation in this case, first put the lens into an
airtight plastic bag before taking it from a cold to warm environment.
Then take out the lens after
it has warmed gradually. Do the same
when taking the lens from a warm environment into a cold one.
● Do not leave the lens in excessive heat such as in a car in direct
sunlight. High temperatures can cause the lens to malfunction.
Conventions used in this instruction
Warning to prevent lens or camera malfunction or damage.
Supplementary notes on using the lens and taking pictures.
1. Mounting and Detaching the Lens
See your camera’s instructions for details on mounting and
detaching the lens.
● After detaching the lens, place the lens with the rear end up to
prevent the lens surface and contacts from getting scratched.
● If the contacts get soiled, scratched, or have fingerprints on
them, corrosion or faulty connections can result. The camera
and lens may not operate properly.
● If the contacts get soiled or have fingerprints on them, clean
them with a soft cloth.
● If you remove the lens, cover it with the dust cap. To attach it
properly, align the lens mount index and the ○ index of the dust
cap, and turn clockwise ●❶. To remove it, reverse the order.
2. Setting the Focus Mode
To shoot in autofocus (AF) mode, set the focus mode switch to AF ❷.
To shoot in manual focus (MF) mode, set the focus mode switch to MF,
and focus by turning the focusing ring. The focusing ring always works,
regardless of the focus mode ❸.
After autofocusing in ONE SHOT AF mode, focus manually by
pressing the shutter button halfway and turning the focusing ring.
(Full-time manual focus)
3. Infinity Compensation Mark
To compensate for shifting of the infinity focus point that results from
changes in temperature.
The infinity position at normal temperature is the point at which the
vertical line of the distance scale L mark is aligned with the distance
index ❹ .
For accurate manual focusing of subjects at infinity, look through
the viewfinder or look at the magnified image* on the LCD screen
while rotating the focusing ring.
* For cameras with Live View shooting capability.
Nomenclature
●① Distance scale
●② Distance index
●③ Focusing ring
●④ Focus mode switch
●⑤ Image Stabilizer switch
●⑥ Lens mount index
●⑦ Contacts
EF Lenses
EF35mm f/2 IS USM
Instructions
CT1-8586-000 1206SZ © CANON INC. 2012
ON
STABILIZER
OFF
●❺
●❼
●❻
Button
4. Image Stabilizer
You can use the Image Stabilizer in AF or MF mode.
This function provides optimal image stabilization depending on
shooting conditions (such as shooting still subjects and following shots).
1. Set the STABILIZER switch to ON ❺.
● If you are not going to use the image stabilizer function, set the
switch to OFF.
2. When you press the shutter button halfway, the Image Stabilizer will
start operating.
● Make sure the image in the viewfinder is stable, then press the shutter
button the rest of the way down to take the picture.
● The Image Stabilizer cannot compensate for a blurred shot
caused by a subject that moved.
● The Image Stabilizer may not be fully effective if you shoot from
a violently shaking vehicle or other transportation.
● The Image Stabilizer consumes more power than normal
shooting, so fewer shots can be taken if you use the function.
● When shooting a still subject, it compensates for camera shake
in all directions.
● It compensates for vertical camera shake during following
shots in a horizontal direction, and compensates for horizontal
camera shake during following shots in a vertical direction.
● When you use a tripod, the Image Stabilizer should be turned
off to save battery power.
● The stabilizer is equally effective for handheld photography and
photography with a monopod. The Image Stabilizer effect may
be reduced, however, depending on the shooting environment.
●
The Image Stabilizer also operates when the lens is used with
extension tube EF12 II or EF25 II.
● If you set the camera’s Custom Function to change the
assigned button to operate the AF, the Image Stabilizer will
operate when you press the newly assigned AF button.
5. Hood (Sold Separately)
The EW-72 hood can keep unwanted light out of the lens, and also
protects the lens from rain, snow, and dust.
To attach the hood, align the hood’s attachment position mark with the
red dot on the front of the lens, then turn the hood in the direction of
the arrow until the lens’s red dot is aligned with the hood’s stop position
mark ❻.
To remove the hood, hold down the button on the side and turn the hood
in the direction of the arrow until the position mark on the hood aligns
with the red dot ❼.
The hood can be reverse-mounted on the lens for storage.
●
Part of the picture may be blocked if the hood is not attached properly.
●
When attaching or detaching the hood, grasp the base of the hood to
turn it. To prevent deformation, do not grasp the rim of the hood to turn it.
6. Filters (Sold Separately)
You can attach filters to the filter mounting thread on the front of the lens.
● Only one filter may be attached.
● Use a polarizing Canon filter (67mm).
● To adjust the polarizing filter, first remove the lens hood.
7. Extension Tubes (Sold Separately)
You can attach extension tube EF12 II or EF25 II for magnified shots.
For shooting distance and magnification, see the extension tube
specifications.
MF mode is recommended for accurate focusing.
●
The extenders cannot be used with this lens.
●
The close-up lenses cannot be used with this lens.
●
CASE (Sold Separately) LP1116
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise
specified in the instructions. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Specifications * Sold Separately
Angle of view Lens
construction
Minimum
aperture
Max.
magnification
Min. focusing
distance
Filter
diameter
Max. diameter and
length Weight Hood* Lens Cap Case*
Diagonal Vertical Horizontal
EF35mm f/2 IS USM 63° 38° 54° 8-10 22 0.24x 0.24m/0.79ft 67mm 77.9x62.6mm
(3.1”x2.5”) 335g/11.8oz EW-72 E-67ll LP1116
Extension Tube Specifications
(Sold Separately)
Magnification
(X)
Focusing Distance Range
(mm) (inch)
EF35mm f/2 IS USM EF12 II 0.60-0.36 168-197 (6.6-7.6)
EF25 II 1.04-0.79 158-160 (6.2-6.3)

Produktspezifikationen

Marke: Axis
Kategorie: Überwachungskamera
Modell: Q1659 35MM F/2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Axis Q1659 35MM F/2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera Axis

Axis

Axis Q1805-LE Bedienungsanleitung

1 Oktober 2024
Axis

Axis FA4090-E Bedienungsanleitung

1 Oktober 2024
Axis

Axis P1290-E Bedienungsanleitung

1 Oktober 2024
Axis

Axis Q6225-LE Bedienungsanleitung

1 Oktober 2024
Axis

Axis Q1808-LE Bedienungsanleitung

1 Oktober 2024
Axis

Axis Q1806-LE Bedienungsanleitung

1 Oktober 2024
Axis

Axis Q1656-B Bedienungsanleitung

1 Oktober 2024
Axis

Axis P3268-SLVE Bedienungsanleitung

1 Oktober 2024
Axis

Axis Q1686-DLE Bedienungsanleitung

1 Oktober 2024
Axis

Axis Q3538-SLVE Bedienungsanleitung

1 Oktober 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024