Axis 250S MPEG-2 Video Server Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Axis 250S MPEG-2 Video Server (57 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/57
AXIS 250S MPEG-2 Video Server
User’s Manual
AXIS COMMUNICATIONS
<Product Name> Quick User’s Guide
AXIS 250S User’s Manual
2
About This Manual
This manual is intended for administrators and operators
of the AXIS 250S MPEG-2 Video Server, and is applicable
for firmware release 3.02. Later versions of the document
will be posted to the Axis Web site, as required.
Previous experience of networking will be of use to the
reader when installing and using this product. Some
knowledge of UNIX or Linux-based systems would also be
beneficial, for developing custom programming scripts
and applications.
Safety Notices Used in This Manual
Caution! - Indicates a potential hazard that can damage
the product.
Important! - Indicates a hazard that can seriously impair
operation.
Do not proceed beyond any of the above notices until you
have fully understood the implications.
Legal Considerations
Camera surveillance may be prohibited by laws that vary
from country to country. Check the laws in your local
region before using the AXIS 250S for surveillance.
The AXIS 250S includes 3 viewer licenses. The
installation of more than 3 instances of the viewer is
prohibited. To purchase further licenses, please contact
your Axis reseller.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of
the patents listed at http://www.axis.com/patent.htm and
one or more additional patents or pending patent
applications in the US and other countries.
Electromagnetic Compatibility (EMC)
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures: Re-orient or relocate the receiving
antenna. Increase the separation between the equipment
and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV
technician for help. Shielded (STP) network cables must be
used with this unit to ensure compliance with EMC standards.
USA - This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
Europe - The AXIS 250S fulfills the requirements for
radiated emission according to limit B of EN55022:1998.
When using the Line input, the AXIS 250S also meets the
requirements for immunity according to EN55024:1998
residential, commercial, and light industry. The Mic input may
be subject to interference from nearby radio transmissions.
For best performance, use the Line input.
Liability
Every care has been taken in the preparation of this manual.
Please inform your local Axis office of any inaccuracies or
omissions. Axis Communications AB cannot be held responsible
for any technical or typographical errors and reserves the right
to make changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty of any
kind with regard to the material contained within this
document, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose. Axis
Communications AB shall not be liable nor responsible for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
Trademark Acknowledgments
Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN
Manager, Linux, Macintosh, Microsoft, Netscape Navigator,
OS/2, UNIX, Windows, WWW are registered trademarks of the
respective holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other countries.
Axis Communications AB is independent of Sun
Microsystems Inc.
Axis Support Services
Visit the Axis Support Web at www.axis.com/techsup/
AXIS 250S MPEG-2 Video Server User’s
Manual.
Revision 1.1
Part no: 20221
Dated: March 2003
Copyright © Axis Communications AB,
2002-2003
AXIS 250S User’s Manual Safety Notice - Battery Replacement 5
Safety Notice - Battery Replacement
The AXIS 250S MPEG-2 Video server server uses a 3.0V CR2032 Lithium battery as the
power supply for its internal real-time clock (RTC). This battery will, under normal
conditions, last for a minimum of 5 years.
The battery should not be replaced unless required!
If the battery does need replacing, please observe the following points:
Caution!
•Danger of Explosion if battery is incorrectly replaced!
•Replace only with the same or equivalent battery, as recommended by the manufacturer.
•Dispose of used batteries according to the manufacturer's instructions.
Produktspezifikationen
| Marke: | Axis |
| Kategorie: | Server |
| Modell: | 250S MPEG-2 Video Server |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Axis 250S MPEG-2 Video Server benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Server Axis
21 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
19 August 2024
19 August 2024
18 August 2024
Bedienungsanleitung Server
- Server Acer
- Server Asus
- Server Gigabyte
- Server HP
- Server Medion
- Server Sony
- Server ZyXEL
- Server Buffalo
- Server Allnet
- Server Linksys
- Server Netgear
- Server Fantec
- Server Technics
- Server Abus
- Server Megasat
- Server Toshiba
- Server Lindy
- Server Dell
- Server Lenovo
- Server Tripp Lite
- Server TRENDnet
- Server Western Digital
- Server AVerMedia
- Server Veritas
- Server Black Box
- Server Supermicro
- Server SilverStone
- Server NEC
- Server Monacor
- Server Seagate
- Server Fujitsu
- Server Maxdata
- Server Revox
- Server Totolink
- Server Conceptronic
- Server D-Link
- Server QNAP
- Server Digitus
- Server LevelOne
- Server APC
- Server Cisco
- Server Freecom
- Server Synology
- Server Kramer
- Server Intellinet
- Server Eaton
- Server Hikvision
- Server FLIR
- Server ELAC
- Server Planet
- Server Asustor
- Server Blackmagic Design
- Server Dane Elec
- Server Digi
- Server Dual Bay
- Server EMC
- Server GeoVision
- Server Ibm
- Server In Win
- Server Iomega
- Server LaCie
- Server Provision ISR
- Server Quantum
- Server Sun
- Server AMX
- Server ACTi
- Server Vimar
- Server Siig
- Server Intel
- Server Moxa
- Server StarTech.com
- Server Smart-AVI
- Server Mobotix
- Server Sonnet
- Server SEH
- Server Gefen
- Server Avocent
- Server Atlantis Land
- Server Hanwha
- Server ATen
- Server KanexPro
- Server Advantech
- Server HGST
- Server Kiloview
- Server B&B Electronics
- Server Extron
- Server Atlona
- Server Rocstor
- Server Raidsonic
- Server G-Technology
- Server Infortrend
- Server Areca
- Server Silex
- Server Promise Technology
- Server Matrox
- Server Origin Storage
- Server Ernitec
- Server EXSYS
- Server Raritan
- Server C2G
- Server Chenbro Micom
- Server Lantronix
- Server IStarUSA
- Server Valcom
- Server TAIDEN
- Server MvixUSA
- Server Opengear
- Server Mr. Signal
- Server NETSCOUT
Neueste Bedienungsanleitung für -Kategorien-
13 Oktober 2024
12 Oktober 2024
12 Oktober 2024
11 Oktober 2024
11 Oktober 2024
10 Oktober 2024
6 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024