Audix OM2 Bedienungsanleitung

Audix Mikrofon OM2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audix OM2 (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

OM2

OVERVIEW:

Designed, assembled and tested by Audix in the USA, the OM2 is a

dynamic vocal microphone used for a wide variety of live and studio

applications. The OM2 is known for its clear and accurate sound

reproduction, resistance to feedback and ability to handle very high

sound pressure levels without distortion.

The OM2 is characterized with a tight and uniformly controlled

hypercardioid polar pattern which helps to isolate the vocals from

the rest of the instruments on stage. With a wide frequency range

of 50 Hz - 16 kHz, the OM2 employs a VLM™ (Very Low Mass)

diaphragm for natural sound with exceptional transient response.

The OM2 is designed with slight bass proximity and a tailored

mid-range, giving it a full bodied sound on small to mid-size PA

systems. The OM2 is well balanced, comfortable to hold, durable

and manufactured with high standards and tight tolerances.

Roadworthy construction includes a precision die cast zinc alloy

body, black e-coat nish, laser etched model and serial number,

steel mesh grill, Switchcraft® XLR connector and heavy duty nylon

clip.

FEATURES:

Clear, accurate sound reproduction

Handles high SPL without distortion

Low handling noise

Provides exceptional gain before feedback

Provides excellent vocal isolation on stage

Dent resistant steel spring grill

5 year warranty

APPLICATIONS:

Lead or backing vocals

Live recording

Broadcast

Home studio - vocal and instrument

Sax, brass, guitar, dobro, flute, percussion, drums

SUPPLIED ACCESSORIES:

Heavy duty nylon mic clip (MC1)

Carrying pouch (P1)

OPTIONAL ACCESSORIES:

WS357 - External foam windscreen

CBL-20 - 20’ XLR-XLR low noise mic cable

T50K - Low to high impedance matching transformer

MODEL VARIATIONS:

OM2-S - Same as above with On-Off switch

DYNAMIC VOCAL MICROPHONE

OM2

Dynamic Vocal

MC1 WS357 CBL-20 T50K

Transducer Type Dynamic

Frequency Response 50 Hz - 16 kHz

Polar Pattern Hypercardioid

Output Impedance 250 ohms

Sensitivity 1.7 mV / Pa @ 1k

Capsule Technology VLM Type B

Off Axis Rejection > 25 dB

Maximum SPL ≥140 dB

Power Requirements None

Connector Switchcraft® male

XLR connector

Polarity Positive pressure on diaphragm

produces positive voltage on pin 2

relative to pin 3 of output

XLR connector

Housing / Finish Zinc Alloy /

Black E-coat

Weight 307 g / 10.8 ounces

Length 176 mm / 6.9 inches

SPECIFICATIONS: ARCHITECTS AND ENGINEERS SPECIFICATIONS:

The microphone shall be of the dynamic type and the polar pattern of the microphone

shall be hypercardioid. The nominal output impedance shall be equal to 250 ohms at

1 kHz. The microphone shall have a sensitivity of 1.7 mV / Pa at 1 kHz and a sound

pressure level ≥140 dB. The microphone body shall be of zinc alloy and the grill cap

shall be steel wire mesh. The overall dimensions shall be 23 mm in diameter at the

base, 53 mm in diameter at the widest point on the grill and 176 mm in length. The

microphone shall be the Audix OM2.

OPERATION:

The OM2 is a low impedance microphone and should be plugged into the “mic level”

input of your console, mixer, or recording device. Please note that your microphone

does not require phantom power and will not be effected in any way by phantom

power should it be running simultaneously while the microphone is in operation. Avoid

plugging or unplugging the microphone from the PA system unless the channel is

muted or the volume of the system turned down. Failure to do so may result in a loud

“popping” noise which could seriously damage the speakers in the PA system.

USER TIPS:

The OM2 has a very tight pick-up pattern in order to help eliminate sound from

other instruments on stage from “bleeding” into the microphone. For best results, it

is important to sing directly into the mic at close proximity (within 2 inches). When

using oor monitors, position the microphone so that it is parallel to the oor. When

using multiple microphones on a live performance stage, allow a distance of 2-3 feet

between mics to avoid phase issues.

*Further miking techniques may be found on our website at www.audixusa.com

www.audixusa.com Call: 503-682-6933 Fax: 503-682-7114

Audix Corporation 9400 SW Barber Street, Wilsonville, OR 97070

SERVICE AND WARRANTY:

This microphone is under warranty for

a period of 5 years from any and all

manufacturing defects. Should your

microphone fail in any way, please con-

tact the Audix Service department at

503-682-6933. A Return Authorization

number is required before returning

any products.

CARE AND MAINTENANCE:

The OM2 is manufactured to exacting specs

with roadworthy construction. However, the

capsule is highly sensitive and should be

handled with care. Avoid extreme temperatures

and be sure to store your microphone in the

pouch provided when not in use. Moisture of

any kind can adversely affect the sound and

performance of your microphone.

FREQUENCY / POLARS:

To register your

microphone, please visit

www.audixusa.com

***All specications subject to change without notice.

DIMENSIONS (mm):

OM2

Produktspezifikationen

Marke:	Audix
Kategorie:	Mikrofon
Modell:	OM2
Tiefe:	176 mm
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Impedanz:	290 Ohm
Höhe:	53 mm
Typ:	Bühnen-/Auftrittsmikrofon
Geräteschnittstelle:	XLR-3
Mikrofon-Frequenz:	50 - 16000 Hz
Ausrichtung des integrierten Mikrofons:	Kardioide
Geräuschunterdrückung:	Ja
Anzahl enthaltener Produkte:	1 Stück(e)
Kompatible Produkte:	MC1\r\nWS357\r\nCBL20\t\t\r\nT50K
XLR-Out:	Ja
Microphon Abmessungen (D x H):	176 x 53 mm
Mikrofongewicht:	307 g
Output Widerstand:	290 Ohm
Tiefe (imperial):	6.9 "
Höhe (imperial):	2.08 "