Audiolab 6000CDTS Bedienungsanleitung

Audiolab CD-Player/Recorder 6000CDTS

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Audiolab 6000CDTS (12 Seiten) in der Kategorie CD-Player/Recorder. Dieser Bedienungsanleitung war fĆ¼r 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/12
User Instructions
6000CDT
REPEAT
Page 1
1: Important Safety Information
IMPORTANT SAFETY INFORMATION
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING: SHOCK HAZARD-DO NOT OPEN
This lightning with arrowhead symbol within an ļ¬‚ash
equilateral triangle is in ed to alert the user to the tend
presence of non-insulated ā€œdangerous voltageā€ within the
productā€™s enclosure that may be of magnitude to suļ¬ƒcient
constitute a risk of electric shock.
Warning: To reduce the risk of electric shock, do not remove
cover (or back) as there are no user-serviceable parts inside.
Refer servicing to qualiļ¬ed personnel.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance instructions in the literature
accompanying the appliance.
Do not block any ventilation openings. Install in
accordance with the manufacturerā€™s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliļ¬ers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two blades
and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does
not into your outlet, consult an electrician for ļ¬t
replacement of the obsolete outlet.
Pr ect the power cord froot m being walked on or pinched
particularly at the plugs, convenience receptacles, and at
the point where they exit from the apparatus.
Use only with the cart, stand, tripod, bracket,
or table by the manufacturer, or speciļ¬ed
sold with the apparatus. When a cart or rack
is used, use caution when moving the
cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to service personnel. Servicing is qualiļ¬ed
required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION: These servicing instructions are for use by
qualiļ¬ed service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are
qualiļ¬ed to do so.
Do not install this equipment in a or built-in space conļ¬ned
such as a bookcase or similar unit, and keep well ventilated
in open space. The ventilation should not be impeded by
covering the ventilation openings with items such as
newspaper, table-cloths, curtains etc.
WARNING: Only use attachments/accessories speciļ¬ed
or provided by the manufacturer (such as the exclusive
supply adapter, battery etc).
WARNING: Please refer to the information on the exterior
panel of the enclosure for electrical and safety information
before installing or operating the apparatus.
WARNING: The battery (battery or batteries or battery pack)
shall not be exposed to excessive heat such as sunshine, ļ¬re
or the like.
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
WARNING: For the terminals marked with symbol of ā€œ ā€
may be of suļ¬ƒcient magnitude to constitute a risk of electric
shock. The external wiring connected to the terminals
requires installation by an instructed person or the used of
ready-made leads or cords.
Mains Supply: The mains operating voltage of Audiolab
6000 series units is shown on the rear panel. If this voltage
does not match the mains voltage in your area, consult your
Audiolab dealer about converting the unit.
The mains supply fuse on the rear panel is accessible when
the IEC mains plug has been removed. In the rare event that
it has broken, check for any obvious cause before replacing
the fuse with one of the correct rating and type.
The fuse values are:
220 ā€“ 240V (UK, China, etc.) T630mAL 250V Slow Blow
100 ā€“ 120V (USA, Japan, etc.) T1AL 250V Slow Blow
This label tells you that the unit
contains a laser component.
Opening the unit will expose the
user to radiation from the laser
beam.
Placement
2: Getting Started
Welcome to Audiolab 6000 Series.
We hope you will enjoy its performance for many years to come.
Please read through this manual to obtain the very best performance from 6000CDT.
Inputs:
ā€¢ CD disc playback.
Outputs:
ā€¢ Optical and coaxial SPDIF digital output.
Features:
ā€¢ Automatic equipment activation via 12V trigger output .
ā€¢ Display on/oļ¬€ options.
ā€¢ Auto standby function with function on/oļ¬€ options.
Unpacking
Unpack the product fully. The carton should contain:
ā€¢ The Audiolab 6000CDT
ā€¢ One IEC power cord suitable for your area.
ā€¢ One Remote handset with two AAA batteries
ā€¢ This instruction manual.
Page 2
lf an item is missing or damaged , report this to your dealer as soon as possible. Retain the
packing for safe transport of your unit. If you dispose of the packing, do so with regarding
to any recycling regulation in your area.
Note: The 6000CDT should be used with the DIGl or OPT outputs connected directly to a
preampliļ¬er with inbuilt DAC.
6000CDT is a high performance CD transport that is the perfect partner for other
Audiolab components such as 6000A.
The unit is designed to run warm during normal operation but ensure you do not block
any ventilation openings.Place the unit on a sturdy shelf or table. If you use an equipment rack,
ensure the unit has adequate ventilation and is on its own shelf. To minimize any interference,
place the power supply in a stable location as far from sensitive analogue input as
possible.Ensure your mains voltage corresponds to the rating plate on the rear of the
productā€™s power supply. If in doubt, consult your dealer. If you move to an area with a diļ¬€erent
mains advice from an Audiolab appointed dealer or a competent service voltage,seek
technician.

Produktspezifikationen

Marke: Audiolab
Kategorie: CD-Player/Recorder
Modell: 6000CDTS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audiolab 6000CDTS benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung CD-Player/Recorder Audiolab

Audiolab

Audiolab 8300CDQ Bedienungsanleitung

17 August 2024
Audiolab

Audiolab 6000CDTS Bedienungsanleitung

7 Juli 2024

Bedienungsanleitung CD-Player/Recorder

Neueste Bedienungsanleitung fĆ¼r -Kategorien-

Muse

Muse M-20 KDB Bedienungsanleitung

16 Oktober 2024
Marantz

Marantz PMD351 Bedienungsanleitung

16 Oktober 2024
Tascam

Tascam CD-A700 Bedienungsanleitung

14 Oktober 2024
Technics

Technics SL-PA10 Bedienungsanleitung

11 Oktober 2024
Soundmaster

Soundmaster SCD6500USB Bedienungsanleitung

8 Oktober 2024
Roland

Roland CD-2E Bedienungsanleitung

3 Oktober 2024
Lenco

Lenco SCR-97 Bedienungsanleitung

3 Oktober 2024
Technics

Technics SL-MC70 Bedienungsanleitung

3 Oktober 2024
Trevi

Trevi CMP 524 Bedienungsanleitung

2 Oktober 2024
Cambridge

Cambridge CD10 Bedienungsanleitung

2 Oktober 2024