Audac SP20 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Audac SP20 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
PROFESSIONAL AUDIO EQUIPMENT
Sound Projector SP20
Installation Guide
Sound Projector
SP20
AUDAC
1
Introduction
The AUDAC SP20 is an unidirectional and humidity proof sound projector with a high efficiency. It is
suitable for speech and music and ensures a powerful and high quality sound reproduction.
It features a 5full range speaker and a built-in 100 Volt line transformer with four different power
taps, to be used in large 100V PA applications.
The enclosure is made of white weatherproof ABS with a aluminum front grill and a special
weatherproof coating.
The mounting of the speaker should be done by means of the stainless steel mounting bracket, and a
75 cm cable is provided for connecting the loudspeaker.
Installation procedure
1) Before mounting the loudspeaker, make sure that the speaker can be mounted on a safe location and
can be easily aimed to the desired location.
Also make sure that the mounting location (Wall / Ceiling) is solid enough to support the weight of the
loudspeaker.
2) The speaker should be mounted using the included U-shaped mounting bracket. Depending on the
mounting surface, the appropriate fasteners should be used (wood, concrete, steel, …).
3) For mounting the speaker more easily, the mounting bracket can be removed by means of the two
bolts on the side.
4) When the U-shaped bracket is mounted on the desired location, the speaker can be installed to the
mounting bracket by means of the two fixing screws on the side.
5) After the loudspeaker is mounted on the desired location, the connections can be made.
2
Connections
To avoid electric shocks during installation, always switch of the amplifier power when connecting
loudspeakers.
A 5 core connection cable is provided on the rear side of the loudspeaker. By connecting the
appropriate cable cores, the desires power taps for the loudspeaker can be selected, to be used in 100V
public address applications.
Connections for 100 Volt use:
COM Black
20 Watt Red
10 Watt Yellow
5 Watt Blue
2.5 Watt Green
Always connect the pole of the amplifier output to the COM (Black core). The + pole of the
amplifier can be connected according to the table above for the desired output power.
When the loudspeaker is connected to 70.7V facilities, the power indicated in the table above will be
reduced to half the power, and when connected to 50V facilities, the power will be reduced to a quarter.
When the desired power tap is selected and connected, the loudspeaker is ready to be used.


Produktspezifikationen

Marke: Audac
Kategorie: Lautsprecher
Modell: SP20

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audac SP20 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Audac

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-