Atlas Sound FAP82T Bedienungsanleitung

Atlas Sound Lautsprecher FAP82T

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atlas Sound FAP82T (6 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
AtlasSound.com 1/5
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS001619 RevC 8/11
Strategy Series® II 8" In-Ceiling Speaker System
FAP82T
Specifications
Woofer Size 8" (203mm)
Woofer Impedance 8 (Nominal)Ω Direct Coupled
Transformer Taps 1.9, 3.8, 7.5, 15, 30, & 60 Watts & 8 Bypass1
Power Handling 70 Watts RMS (at 8Ω)
Sensitivity (1W / 1M) 90dB Average
Frequency Response 65Hz – 20kHz (±5dB)
Magnet Weight 21oz (580g)
Cut-Out Diameter 14" (356mm)
Height 123⁄4" (324mm)
Diameter 153⁄4" (400mm)
Features
• High efficiency 8" driver
• Extended Low Frequency Response from the Optimally Tuned and
Ported Deep Drawn Galvanized Steel Enclosure (937 in
3)
• 60 Watts Enhanced Quality 70.7V / 100V Internal Transformer
Minimizes Insertion Loss and Maintains Low Frequency
• Front Mounted Tap Selector Switch for Easy System Tuning
Adjustments (1.9 – 60 watts @ 70.7V Plus 8 Bypass)Ω
• Unique “Trap Door" Input Section Allows for Through Conduit Runs
with Rigid or Flex Conduit
• 4 Pole Detachable Phoenix / Euro Style Connector Allows Easy
Pre-wiring
• “Press-Fit" Grille to Better Blend into Contemporary Architecture
• Ships Complete with Speaker / Transformer Factory Assembled into
Back Can, Grille, and Unique C-Ring / V-Rail Mounting Hardware
• May be Pendulum Mounted via Top Mounted Eyebolt (Included)
• Enclosure is Finished in White for Optimum Aesthetics when Hung in
Open Ceiling Applications
• UL 1480 Listed
Applications
The Atlas Sound FAP82T is a premium performance 70.7V / 100V tuned
& ported 8" coaxial ceiling speaker system perfectly suited for many
business music and public address applications – especially applications
where high ceilings require loudspeakers with increased efficiency and
tighter pattern control. The 8" coaxial speaker system features extended
low frequency response rivaling that of many subwoofers.
The FAP82T will satisfy the needs of owners, architects, contractors,
and consultants by delivering true, high fidelity sound reproduction in an
attractive and easy-to-install system. The FAP82T is ideal for high intelligi-
bility voice, music, and signal reproduction in commercial, industrial, and
institutional applications.
FAP82T
FAP82T
(Pendulum Eyebolt &
Phoenix / Euro
Style Connector)
AtlasSound.com 2/5
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS001619 RevC 8/11
General Description
Loudspeakers exhibiting wider dispersion than 100° will exceed 6dB of
drop off at the edge of the coverage pattern causing excessive SPL vari-
ances. Using more of the same wide coverage speaker in a high ceiling
application to compensate only worsens the situation, as comb filtering
from multi-path arrivals will result. For more information please review
our white paper “The Limitations of Wide Dispersion" on our website,
www.AtlasSound.com.
The loudspeaker component is based on the legendary Atlas Sound
FA Series drivers. High quality construction 8" coaxial cone type driver
includes a 35mm voice coil and polypropylene cone with a butyl rubber
surround. The 19mm coaxially mounted tweeter is constructed of PEI.
A high sensitivity of 90dB average means less power may be required
to achieve the desired SPL. This loudspeaker is factory assembled in
an optimally tuned and ported deep drawn enclosure and includes a
specially designed 60 watt low saturation 70.7V / 100V transformer. A
convenient front mounted selector switch allows tap selection without
the need to remove the speaker from the ceiling. This tap selector switch
also includes a transformer bypass setting for instances where the 8Ω
FAP82T driver is to be direct coupled with a low impedance amplifier.
Mounting Accessories
Mounting is simplified with Strategy Series® style “dog leg” tabs that
allow easy installation into drop tile or drywall ceilings with provided tile
bridge assembly. The tile bridge consists of two “V” shaped mounting
rails and a C-Ring assembly. The C-Ring can be attached to the rails with
the screws provided to extend support to the T-Bar grid in suspended
ceiling applications. Multiple hole locations are provided to allow the
C-Ring to be positioned to the outer edge of the tile if necessary.
For existing drywall applications, the tile bridge, C-Ring, and support rails
can be inserted into the hole cut for the FAP82T. For easy positioning the
“V” shaped support rails match the shape of the C-Ring tabs for easy
maneuvering and location when working “blindly” above the deck.
A uniquely designed “easy access” input panel on the side of the enclo-
sure allows conduit runs using flexible or rigid conduit. Below this cover
resides a detachable Phoenix style locking four-pole Euro connector.
The package includes an attractive press-fit grille, which nicely matches
contemporary architecture.
For new construction drywall ceiling applications, the optional FAP82-TR
trim ring is available. This unit provides a marked location for drywall
installers to cut around essentially reserving the desired location in the
ceiling until final installation of FAP82T. Mounting holes are provided to
accommodate 16" or 24" OC stud / joist mounting.
With the FAP82T, Atlas Sound has addressed pendulum mounting for
open ceiling applications. An eyebolt assembly is included with the
package allowing suspension of the FAP82T with load rated cable or
“all thread”. The enclosure is finished white to match the bezel ring for
better blend in open ceiling applications. Please note that the enclosure
/ bezel ring may also be painted to accommodate custom finishes when
required.
SPEAKER SYSTEMS SUSPENDED OVERHEAD POSE A RISK
OF SERIOUS INJURY OR DEATH IF THEY FALL.
Overhead suspension of any object (rigging) is inherently dangerous.
It poses a substantial risk of injury or death to both those persons per-
forming the installation and those persons who may later occupy the
space under the suspended objects. You may be held liable for any injury
or damages which may be alleged to result from improper installation.
IF YOU ARE NOT EXPERIENCED IN RIGGING OR SUSPENSION
OF SPEAKER SYSTEMS, OR IF YOU HAVE ANY DOUBT
THAT YOU ARE QUALIFIED TO INSTALL SUSPENDED
SPEAKER SYSTEMS, DO NOT PROCEED.
Instead, you should obtain the services of properly qualified personnel to
complete the installation.
NEVER SUSPEND THE SPEAKER SYSTEM BY ANY ATTACHMENT
EXCEPT THE PROVIDED SUSPENSION POINT.
The eyebolt can also be used with an auxiliary support cable in drop tile
installations.
NOTE: It is MANDATORY that the secondary support be utilized in
drop ceilings for safety and seismic considerations.
FAP82-TR
FAP82T
AtlasSound.com 3/5
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS001619 RevC 8/11
Architect & Engineers Specifications
System shall include a high performance 8" coaxial loudspeaker, ported
bass reflex enclosure and press-fit grille for conventional ceiling installa-
tion. Frequency response for the system shall be 65Hz – 20kHz (±5dB).
Sensitivity shall be 90dB average.
Loudspeaker shall be comprised of an 8" coaxial cone type driver. Cone
shall be constructed of polypropylene with a butyl rubber surround. The
19mm tweeter shall be constructed of PEI. Woofer magnet shall
be a minimum of 21oz (595g) and the voice coil diameter shall be 11⁄ " 2
(38mm).
Transformer shall be a 70.7V / 100V type with primary taps at 1.9, 3.8,
7.5, 15, 30, and 60 watts (@ 70.7V) with a front mounted tap selector
switch. This tap selector switch shall also include a transformer bypass
setting for instances where the 8Ω FAP82T driver is to be direct coupled
with a low impedance amplifier.
Enclosure shall be a deep drawn steel enclosure design. Internal volume
shall be 937 in3. To facilitate connection in conduit systems, enclosure
shall be equipped with an access panel covering a recessed terminal cup.
This cover shall provide a combination in 3⁄4" (19mm inside diameter) / 1"
(25mm inside diameter) knock-out on the side access and a top access
compression fitting / strain relief to facilitate flexible conduit up to 22mm
outside diameter or 1" (25mm inside diameter) conduit when the com-
pression fitting is removed.
External wiring shall be accomplished via a removable lockable wiring
connector with screw-down terminals to provide both secure wire ter-
mination and pre-wiring capability before loudspeaker installation. The 4
pole locking connector shall be located in the recessed area behind the
conduit access panel.
A 1⁄4"–20 drop forged eyebolt factory installed into an insert on top of
enclosure for additional suspension point when used in drop tile ceilings
or for pendant mounting.
Construction of enclosure shall be a minimum of 18-gauge deep drawn
metal finished in white epoxy.
The system shall include a support backing plate to reinforce the ceil-
ing material and tile support rails for use on either 2' x 4' (609mm x
1219mm) or 2' x 2' (609mm x 609mm) suspended ceiling tiles. This
assembly can all be installed from beneath the ceiling tile.
Overall front face diameter shall not exceed 15
3⁄4" (400mm); overall height
shall not exceed 111⁄2" (292 mm), 123⁄4" (324mm) including factory-installed
eyebolt.
Grilles shall be press-fit, manufactured from 24-gauge perforated steel
mesh and finished in white epoxy. Round grille shall be 13.67" (347mm)
diameter.
The loudspeaker shall be the Atlas Sound FAP82T.
C-Ring / V-Rails
Front Mounted
Tap Selector

Produktspezifikationen

Marke: Atlas Sound
Kategorie: Lautsprecher
Modell: FAP82T

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atlas Sound FAP82T benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Atlas Sound

Atlas Sound

Atlas Sound IP-SDM Bedienungsanleitung

22 August 2024
Atlas Sound

Atlas Sound M1000-W Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound I8SM+ Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound PM8GD-B Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound SMA-15 Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound GD87W Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound All Weather SM63T Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound PM8SUB Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound AP-30 Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound FA138 Bedienungsanleitung

21 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024