Atlas Sound FAP62T-UL2043 Bedienungsanleitung

Atlas Sound Lautsprecher FAP62T-UL2043

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atlas Sound FAP62T-UL2043 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
AtlasSound.com 1/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2009 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003678 RevA 9/09
Strategy Series® II In-Ceiling 6" Coaxial Speaker System
FAP62T-UL2043
Specifications
Power Rating 50 Watts
Transformer Taps 2, 4, 8, 16, & 32 Watts
Frequency Response 63Hz – 20kHz (±7dB)
Sensitivity (1W / 1M) 88dB
Woofer 6" Poly Cone w/ Butyl Rubber Surround
Woofer Magnet Weight 14oz (398g)
HF Driver 19mm Coaxially Mounted PEI Dome Tweeter
Diameter 121⁄ " (318mm)2
Overall Height 8.48" (215mm)
Enclosure Volume 475 in3
Cut-out Dimensions 11" (279mm)
Features
• ExtendedLowFrequencyResponsefromthe475in
3 Optimally Tuned
and Ported Deep Drawn Galvanized Steel Enclosure
• EasyInstallationinDropTileorSheetrockCeilingsViaC-Ring/V-Rail
TileBridgeandDogLeg”MountingSystem(Included)
• FrontMountedTapSelectorSwitchforEasySystemTuning
Adjustments Include Transformer Bypass Setting for 8 Direct Ω
Coupled Operation
• Unique“TrapDoor”InputSectionAllowsforThroughConduitRuns
with Rigid or Flex Conduit
• 4PoleDetachable“Phoenix”StyleConnectorAllowsEasyPre-Wiring
and Is Convenient for Daisy Chaining Additional Strategy Series Full
Range Speakers or Subwoofers
• “PressFit”GrillesBlendBetterintoContemporaryArchitecture
• EnhancedQuality70.7V/100VInternalTransformersMinimize
InsertionLossandMaintainLowFrequencyResponseWhile
ProvidingIncreasedOutputforHigherSPLApplications
• ULListed1480&2043
Applications
AtlasSound’sFAP62T-UL2043combinessuperiorcoaxialloudspeaker
performance with even dispersion and easy installation. A low profile
enclosureandwidecoveragemaketheFAP62T-UL2043aperfectchoice
forlowceilings.TheFAP62T-UL2043willsatisfytheneedsofowners,
architects, contractors, and consultants by delivering true, high fidel-
ity sound reproduction in an attractive and easy-to-install system. The
FAP62T-UL2043isidealforhigh-intelligibilityvoice,music,andsignal
reproduction in commercial, industrial, and institutional applications. The
FAP62T-UL2043isUL1480andUL2043Listedallowingforinstallationin
true plenum air spaces.
General Description
TheFAP62T-UL2043's110°dispersionanglecanreducethenumberof
FAP62T-UL2043snecessarytoachievecoverageindistributedsystems
with low ceilings.
The loudspeaker component matches the performance of the legen dary
Atlas Sound FA136 driver. High quality construction 6" coaxial cone type
driver includes a 1" voice coil and polypropylene cone with a butyl rubber
surround. The 19mm coaxially mounted tweeter is constructed of PEI.
A high sensitivity of 88dB average (92dB peak) means less power may
berequiredtoachievethedesiredSPL.Thisloudspeakerisfactory
assembled in an optimally tuned and ported deep drawn enclosure
and includes a specially designed 32 watt low saturation 70.7V / 100V
transformer. A convenient front mounted selector switch allows tap
selection without the need to remove the speaker from the ceiling. This
switch also includes a transformer bypass setting for 8 direct coupled Ω
operation.
FAP62T -UL2043
AtlasSound.com 2/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2009 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003678 RevA 9/09
Mounting Accessories
Mounting is simplified with Strategy Series®styleDogLeg”tabsthat
allow easy installation into drop tile or drywall ceilings with provided tile
bridgeassembly.Thetilebridgeconsistsoftwo“V”shapedformed
mounting rails and a C-Ring assembly. The C-Ring can be attached to
the rails with the screws provided to extend support to the T-bar grid
in suspended ceiling applications. Multiple hole locations are provided
to allow the C-Ring to be positioned to the outer edge of the tile if
necessary.
For existing dry-wall applications the tile bridge C-Ring and support
railscanbeinsertedintotheholecutfortheFAP62T-UL2043.Foreasy
positioningthe“V”shapedsupportrailsmatchtheshapeoftheC-Ring
tabs for easy maneuvering and location when working “blindly" above
the deck. A uniquely designed easy access" input panel on the side of
the enclosure allows for “through" conduit runs using flexible or rigid
conduit. Below this cover resides a detachable Phoenix / Euro style
locking four-pole connector, which provides for easy daisy chain wiring to
otherfullrange70.7VloudspeakersorAtlasSoundFAPSUBsubwoofers.
The package includes an attractive press-fit grille, which nicely matches
contemporary architecture.
For new construction drywall ceiling applications, the optional FAP62-TR
trim ring is available. This unit provides a marked location for drywall
installers to cut around essentially reserving the desired location in the
ceilinguntilfinalinstallationofFAP62T-UL2043.Mountingholesare
provided to accommodate 16" or 24" OC stud / joist mounting.
AsupportringisalsoprovidedonthetopoftheFAP62T-UL2043
enclosure to facilitate an auxiliary support cable.
NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT
BE UTILIZED IN DROP CEILINGS FOR SAFETY AND SEISMIC
CONSIDERATIONS.
Architect & Engineer Specifications
TheloudspeakersystemshallbeAtlasSoundFAP62T-UL2043.System
shall include a high performance 6" coaxial loudspeaker, ported bass
reflex enclosure and press-fit grille for conventional ceiling installation.
Frequency response for the system shall be 63Hz – 20kHz (±7dB).
Sensitivity shall be 88dB average.
Loudspeakershallbecomprisedofa6"coaxialconetypedriver.Cone
shall be constructed of polypropylene with a butyl rubber surround. The
19mm tweeter shall be constructed of PEI. Magnet shall be a minimum
of 10oz (283g) and the voice coil diameter shall be 1" (25mm).
Transformer shall be a 70.7V / 100V type with 2, 4, 8, 16, and 32 watt
primary taps (@70.7V) with a front mounted tap selector switch to include
transformer bypass setting for 8 direct coupled operation.Ω
Enclosure shall be a deep drawn steel enclosure design. Internal volume
shall be 475 in3. To facilitate connection in conduit systems, enclosure
shall be equipped with an access panel covering a recessed terminal
cup. This cover shall provide a combination 3 " (19mm inside diameter) 4
/ 1" (25mm inside diameter) knock-out on the side access and a top
access compression fitting / strain relief to facilitate flexible conduit up to
22mm outside diameter or 1" (25mm inside diameter) conduit when the
compression fitting is removed.
External wiring shall be accomplished via a removable lockable wiring
connector with screw-down terminals to provide both secure wire
termination and pre-wiring capability before loudspeaker installation. The
4 pole locking connector shall facilitate in/out connections and shall be
located in the recessed area behind the conduit access panel.
Seismic support eye shall be provided on top of enclosure for additional
suspension point when used in drop tile ceilings. Construction of
enclosure shall be a minimum of 18-gauge deep drawn galvanized metal.
The system shall include a support backing plate to reinforce the
ceilingmaterialandtilesupportrailsforuseoneither2'x4'(609mm
x1219mm)or2'x2'(609mmx609mm)suspendedceilingtiles.This
assembly can all be installed from beneath the ceiling tile.
Overall front face diameter shall not exceed 12
1 " (318mm); overall depth 2
from the bottom of the ceiling shall not exceed 8.48" (215mm).
Grilles shall be press-fit, manufactured from 24-gauge perforated steel
mesh and finished in white epoxy. Round grill shall be 10.48" (266mm)
diameter.
TheloudspeakershallbetheAtlasSoundFAP62T-UL2043.
C-Ring / V-Rails
FAP62-TR
AtlasSound.com 3/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2009 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003678 RevA 9/09
Frequency (Hz)
SPL in dB
FAP62T-UL2043 Directivity vs Frequency
Frequency (Hz)
SPL in dB
FAP62T-UL2043 1/2 Space Frequency Response


Produktspezifikationen

Marke: Atlas Sound
Kategorie: Lautsprecher
Modell: FAP62T-UL2043

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atlas Sound FAP62T-UL2043 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Atlas Sound

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-