Atlas Sound FAP40T Bedienungsanleitung

Atlas Sound Lautsprecher FAP40T

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atlas Sound FAP40T (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
AtlasSound.com 1/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. ATS001618 RevD 8/11
Strategy Series® II In-Ceiling 4" Speaker System
FAP40T(B)
Specifications
Power Rating 16 Watts (8Ω)
Transformer Taps 1, 2, 4, 8, & 16 Watts & 8 BypassΩ
Frequency Response 100Hz – 12kHz (±3dB)
80Hz – 15kHz (±5dB)
Sensitivity (1W / 1M) 87dB
Woofer 4" Polypropylene with SBR Surround
Woofer Magnet Weight 13 oz (369g)
Bezel Diameter 73⁄8" (187mm)
Overall Height 71⁄8" (181mm)
Cut-Out Diameter 65⁄16" (160mm)
Features
• Tuned & Ported Design for Extended Bass Response
• 16 Watts Internal Transformer
• 8Ω Transformer Bypass Setting
• Low Profile Plastic Enclosure
• Input Via 2 Pole Terminal Strip
• Press-Fit Grille Blends Perfectly into Contemporary Architecture
• Lightweight Construction Makes Use of Additional Support in Drywall
Ceilings Unnecessary
• Tile Bridge Included
• Perfect Companion with the FAPSUB Subwoofer System When Sub
Bass Is Required
• Also Available in Black FAP40T-B
• UL 1480 Listed
Applications
Designed to provide high performance in a very compact footprint, the
FAP40T appeals to both system designers and architects. FAP40T is ideal
for high-intelligibility voice, music, and signal reproduction in commercial,
industrial, and institutional applications.
General Description
A unique, patented tap selector switch design allows for easy system
tuning. A full selection of taps up to 16 Watts as well as an 8 transΩ-
former bypass setting is included for maximum system versatility. This
switch "knob" also functions as a diffuser cone, providing smooth, even
dispersion of the high frequency content from the center of the 4" poly-
propylene driver. In fact, the high frequency response of the FAP40T is
so natural that many would assume that the driver in the FAP40T was a
coaxial design instead of a single cone driver.
Low frequency response is enhanced by the tuned and ported enclosure
design. The enclosure (UL1480 Listed) is constructed of high impact
injection molded plastic and includes a press fit grille design that blends
well with contemporary architecture.
A two pole terminal strip housed below a removable metal cover on the
back of the FAP40T enclosure allows for easy system wiring as well as
"daisy chain" wiring to other FAP40Ts or even FAPSUB subwoofers (a
great combination).
FAP40T
FAP40T-B
AtlasSound.com 2/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. ATS001618 RevD 8/11
Mounting Accessories
A Tile Bridge is included in the package for suspended ceiling applica-
tions. The light weight design of the FAP40T coupled with the "Dog Leg"
mounting system allows the FAP40T to mount into most drywall ceilings
without the need for a separate mounting ring.
For new construction drywall ceiling applications, the optional FA-TR4
trim ring is available. This unit provides a marked location for drywall
installers to cut around, essentially reserving the desired location in the
ceiling until final installation of FAP40T. Mounting holes are provided to
accommodate 16" or 24" OC stud / joist mounting.
The package includes an attractive press-fit grille, which nicely matches
contemporary architecture.
The FAP40T includes a secondary support point built into the termination
cover. This "ring" may be used with an auxiliary support cable in drop tile
installations.
Architect & Engineer Specifications
The loudspeaker system shall be Atlas Sound FAP40T. System shall
include a high performance 4" loudspeaker, ported bass reflex enclosure
and press-fit grille for conventional ceiling installation.
Frequency response for the system shall be 100Hz – 12kHz (±3dB),
80Hz – 15kHz (±5dB). Sensitivity shall be 87dB average.
Loudspeaker shall be compromised of a 4" cone type driver. Cone shall
be constructed of polypropylene with a butyl rubber surround. Magnet
shall be a minimum of 13oz (368.5g) and the voice coil diameter shall be
1" (25mm).
Transformer shall be a 70.7V / 100V type with 1, 2, 4, 8, and 16 watt
primary taps (@70.7V) with a front mounted tap selector switch. This
tap selector switch shall also include a transformer bypass setting for
instances where the 8 FAP40T driver is to be direct coupled with Ω
a low impedance amplifier.
Enclosure shall be an injection molded plastic design. Internal volume
shall be 85 in3 (1.4L).
To facilitate connection in conduit systems, enclosure shall be equipped
with an access panel covering a recessed terminal cup. This cover shall
provide a 7⁄8" (22mm inside diameter) hole for top access.
External wiring shall be accomplished via a two pole terminal strip with
screw-down terminals to provide secure wire termination.
The system shall include a tile bridge assembly to reinforce the ceil-
ing material. The tile bridge shall be designed for use on either 2' x 4'
(609mm x 1219mm) or 2' x 2' (609mm x 609mm) suspended ceiling tiles.
Overall front face diameter shall not exceed 7
3⁄8" (187mm); overall height
shall not exceed 7
1⁄8" (181mm).
Grilles shall be press-fit, manufactured from 24-gauge perforated steel
mesh and finished in white epoxy. Round grille shall be 5
1⁄2" (140mm)
diameter.
The loudspeaker shall be the Atlas Sound FAP40T.
FAP40T
(Shown Installed in Drop Tile Ceiling)
FAP40T
(Dog Ears Open on Included Tile Bridge)
AtlasSound.com 3/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. ATS001618 RevD 8/11

Produktspezifikationen

Marke: Atlas Sound
Kategorie: Lautsprecher
Modell: FAP40T

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atlas Sound FAP40T benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Atlas Sound

Atlas Sound

Atlas Sound IP-SDM Bedienungsanleitung

22 August 2024
Atlas Sound

Atlas Sound M1000-W Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound I8SM+ Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound PM8GD-B Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound SMA-15 Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound GD87W Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound All Weather SM63T Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound PM8SUB Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound AP-30 Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound FA138 Bedienungsanleitung

21 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024