Atlas Sound AP-15TC Bedienungsanleitung

Atlas Sound Lautsprecher AP-15TC

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atlas Sound AP-15TC (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL2-1363
113
TWO
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 FAX (800) 765-3435/
TECHNICAL SPECIFICATIONS
Models: AP-15, AP-15T(C)
Power Rating: 15 Watts continuous
Frequency Response: 400 - 14,000 Hz (Nominal)
500 Hz - 6,000 Hz (± 5dB)
Sensitivity: 120dB at 15 watts (peak)
116dB at 15 Watts /1 Meter (avg) 500-6000 Hz
106dB 1 Watt/1Meter (avg) 500-6000 Hz
Dispersion Angle: 70° (-6dB, 2000 Hz octave band)
Weight: AP-15 = 3.5 lbs (1.6kgs)
AP-15T = 4 lbs. (1.8kgs)
Finish: Baked epoxy in grey.
Model AP-15TC is beige epoxy.
Dimensions: 77⁄8" W x 83⁄4" H x 95⁄16" D
OMNI-PURPOSE®15 WATT
HORN LOUDSPEAKERS
AP-15
AP-15T(C)
AP-15 Series
FEATURES
• Superior Intelligibility for Voice and Tone Signaling
• High-Efficiency Driver with Proven Performance Reliability
• Transformer (T) Equipped Version for Versatile 25, 70.7, or 100V
Line Applications
• Omni-Purpose®Bracket for Precise Positioning
• Environment Resistant for Outdoor and Indoor Use
• U.S. Trademark Design is World Recognized for Quality and
Dependability
• Available in Grey or Beige (C) Finish
APPLICATIONS
AP-15 and AP-15T environment-resistant loudspeakers are the world
standard for high-intelligibility voice and signal transmission in medi-
um-power indoor and outdoor public address, intercom, security and
industrial-signal-system applications. Cost effective, 15-watt units
incorporate high-efficiency compression drivers to project sound over
long distances or wide areas with fewer loudspeakers. The AP-15
Series is recognized throughout the world as "the performance stan-
dard" for commercial sound, intercom and protective-signaling sys-
tems. Units are commonly installed in commercial buildings, distribu-
tion centers, factories, schools, public access areas, civic centers and
recreational facilities.
GENERAL DESCRIPTION
The 8-ohm Model AP-15 and the transformer-equipped Model AP-15T
are double re-entrant loudspeakers which deliver 15-watts of continu-
ous power handling, superior intelligibility and unparalleled efficiency.
The AP-15 Series operates within a nominal frequency response
range of 400-14,000 Hz and offers a sensitivity of 120dB at rated
power to provide clear voice and signal communication.
Transformer-equipped Model AP-15T includes a versatile, 3-way, 25,
70.7, 100V line transformer to meet a variety of distributed system
needs. The transformer is adjustable using Atlas Sound's exclusive
Vari-Tap®Connect Center which features a 7-position,
watts/impedance selection switch. The labor-saving Vari-Tap
®switch
is screwdriver adjustable and includes a protective cover with built-in
cable strain relief.
The trademarked squared-bell design signifies Atlas Sound quality
and reliability. The Omni-Purpose® mounting bracket (supplied on all
models) achieves precise positioning in the vertical and horizontal
planes with a single adjustment and includes provisions for loud-
speaker installation on conventional surfaces as well as for strap-
mounting on I-beams or pillars. AP Series loudspeakers are U.S.
made to assure superior service reliability. Weather-resistant con-
struction is metal and matching ABS plastic with metal components
finished in grey epoxy (standard) or beige epoxy (Model AP-15TC).
The AP-15 Series also includes a 45-ohm Model AP-15-45 and a 4-
ohm AP-15-4 which are designed respectively for intercom and
CB/auxiliary radio applications. (See SL2-1567).
ARCHITECT AND ENGINEER SPECIFICATIONS
Loudspeakers shall be Atlas Sound Model __________ (AP-15, AP-15C, AP-
15T, AP-15TC) or approved equal. Each loudspeaker unit shall be supplied
with integral compression driver and shall be constructed of structural alumi-
num and ABS plastic with double re-entrant acoustic path and exponentially-
flared square bell. The weather-resistant unit shall have a continuous audio
power rating of 15 watts. Frequency response range shall be 400-14,000 Hz
(Nominal), 500-6000 Hz (+5dB). Sound pressure level shall be 116dB
(15W/1M), 106dB (1W/1M). Sound dispersion shall be 70 degrees (-6dB,
2000 Hz octave band). Mounting bracket shall allow vertical and horizontal
adjustment and include provisions for surface mounting, banding or strap-
ping. Loudspeaker shall have impedance selection, via seven-position switch
of 5000, 2500, 1300, 666, 333, 89 and 45 ohms. Power taps shall be avail-
able at .48, .94, 1.8, 7.5, 15 watts for 25V line, 1, 2, 3.8, 7.5, 15 watts for
70.7V line and 2, 4, 8 and 15 watts for 100V line. Wiring terminals shall be
enclosed for security and weather protection. Finish shall be grey or beige (C)
baked epoxy as indicated. Dimensions shall be 7
7⁄8" W x 83⁄4" H x 95⁄16" D.
ACCESSORIES
BX-2A Vandal Resistant Cover Plate for Armored Cable and Conduit Connection. Constructed of Cast Aluminum.
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL2-1363
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 FAX (800) 765-3435/
AP-15(T) Frequency Response
AP-15 (Impedance Sweep)
AP-15(T) (Harmonic Distortion - 1.5 watts @ 1 meter)
Polars Are Normalized To Zero On Axis
Atlas Sound products are designed and tested in our well-equipped research laboratory which contains a fully anechoic chamber, complete
analog Bruel & Kjaer measurement equipment and Techron
®TEF 20®audio analyzer. Atlas Sound is proud to be a beta site for TEF software.
TYPICAL CAPACITOR VALUES
8 Ohm Driver 25 Volt Line 70 Volt Line 100 Volt Line
70 mfd 15 mfd 2 mfd 1 mfd
Fundamental
2nd Harmonic
3rd Harmonic
15 watts
@1 meter
1 watt @ 1 meter
Mounting Flange
MAGNITUDE (dB)
Frequency (Hz)
MAGNITUDE (dB)
Frequency (Hz)
Impedance Amplitude
OHMS
Frequency (Hz)
DRIVER PROTECTION: The horn loudspeaker should not be operated at
frequencies outside the specified range, especially below horn cut-off. It is sug-
gested that any program material be high-passed at 300 Hz with a 6dB per
octave filter. This can be done by a low level filter at the amplifier input or by a
series capacitor at each loudspeaker. Electrolytic capacitors can be used but
they must be non-polarized.
(See Typical Capacitor Values Chart.)
9⁄32" Dia.
3 Holes 120°
APART, ON 2.312
BOLT CIRCLE
13⁄4"
2"
1⁄2" BANDING SLOT
27
⁄8" DIA.
APR-15T Vari-Tap®Control Connect Center Xfmr. Power Taps
Switch Impedance Watts Watts Watts
Position (Ohms) @ 25V @ 70.7V @100V
1 5,000 – 1 2
2 2,500 – 2 47
3 1,300 .48 3.8 7.7
4 666 .94 7.5 15
5 333 1.8 15 X*
6 89 7.5 X* X*
7 45 15 X* X*
*Do not use
Frequency Q Di Beamwidth
(Hz) (Degrees)
1000 5.15 7.12 115
2000 13.90 11.43 70
4000 32.20 15.08 40
8000 39.90 16.01 30

Produktspezifikationen

Marke: Atlas Sound
Kategorie: Lautsprecher
Modell: AP-15TC

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atlas Sound AP-15TC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Atlas Sound

Atlas Sound

Atlas Sound IP-SDM Bedienungsanleitung

22 August 2024
Atlas Sound

Atlas Sound M1000-W Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound I8SM+ Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound PM8GD-B Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound SMA-15 Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound GD87W Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound All Weather SM63T Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound PM8SUB Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound AP-30 Bedienungsanleitung

21 August 2024
Atlas Sound

Atlas Sound FA138 Bedienungsanleitung

21 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024