Asus P5K Deluxe Bedienungsanleitung

Asus Hauptplatine P5K Deluxe

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Asus P5K Deluxe (2 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war fĂĽr 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
ASUS P5K Deluxe 2-3
2.2.3 Motherboard layout
PANEL
P5K DELUXE
®
AAFP
CHASSIS
24.5cm (9.6in)
30.5cm (12.0in)
CPU_FAN
DDR2 DIMM_A1 (64 bit,240-pin module)
CHA_FAN4
FLOPPY
Super
I/O
agere
L-FW3227-100
CD
PCIEX1_2
PCIEX16_2
CLRTC
Intel
®
ICH9R
EATXPWR
CR2032 3V
Lithium Cell
CMOS Power
Intel
®
P35
PCI1
USB1112
LAN1_USB12
KB_USB56
LAN2_USB34
PCIEX16_1
PCI2
PCI3
JMB363
CHA_FAN1
RTL8110SC
SPDIF_OUT
LGA775
CHA_FAN3
IE1394_2 USB78
SATA1
SATA3
EATX12V
AD1988B
88E8056
PWR_FAN
DDR2 DIMM_A2 (64 bit,240-pin module)
DDR2 DIMM_B1 (64 bit,240-pin module)
DDR2 DIMM_B2 (64 bit,240-pin module)
PCIEX1_1
CHA_FAN2
SATA2
SATA4
SATA5
SATA6
AUDIO
F_ESATA12
SPDIF_O12
COM1
BIOS
PRI_EIDE
SB_PWR
DET_X1_1
DET_X1_2
DET_X16_1
DET_X16_2
DET_PCI2
DET_PCI1
DET_PCI3
USB910
Refer to 2.7 Connectors for more information about rear panel connectors and
internal connectors.
ASUS P5K Deluxe 2-31
8. ATX power connectors (24-pin EATXPWR, 2x4-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs
are designed to t these connectors in only one orientation. Find the proper
orientation and push down rmly until the connectors completely t.
7. Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default , the pin labeled “Chassis Signal” and “Ground” are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
P5K DELUXE
®
P5K DELUXE Chassis intrusion connector
CHASSIS
+5VSB_MB
Chassis Signal
GND
(Default)
P5K DELUXE
®
P5K DELUXE ATX power connectors
EATXPWREATX12V
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts
+3 Volts
-12 Volts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 Volts
+3 Volts
+5 Volts
Ground
GND +12V DC
GND +12V DC
GND +12V DC
GND +12V DC
• Make sure to remove the cap on the EATX12V connector before connecting
an 8-pin EPS +12V power plug.
• Use only either a 4-pin ATX12V or an 8-pin EPS +12V power plug for the
EATX12V connector.

Produktspezifikationen

Marke: Asus
Kategorie: Hauptplatine
Modell: P5K Deluxe

Brauchst du Hilfe?

Wenn Sie Hilfe mit Asus P5K Deluxe benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten