Asus EeeTop ET2300 Bedienungsanleitung

Asus Desktop EeeTop ET2300

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Asus EeeTop ET2300 (8 Seiten) in der Kategorie Desktop. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
1
User Guide for Windows® 8
Conî‚¿guring the audio output via an HDMI device
If you want to use a high-denition TV as an audio output device, connect it to your Home
Theater PC and follow the steps below to congure the audio settings.
1. From the Metro Start Screen, click Desktop to launch the Desktop Mode.
2. Right-click the Volume Mixer icon on the Windows®
taskbar and click .Playback devices
3. From the Playback screen, select Digital Audio
(HDMI).
4. Click and the Speaker Setup window Congure
pops up.
NOTE: For updates on these system requirements, visit http://www.windows.microsoft.com/en-
us/windows-8/faq
Processor
1GHz or faster
RAM
1GB (32-bit) or 2 GB (64-bit)
Hard disk space
16 GB (32-bit) or 20 GB (64-bit)
Graphics card
Microsoft DirectX9 graphics device with WDDM driver
Screen resolution
1024 x 768 for Metro Style Apps
1366 x 768 for Snap feature
System requirements
To facilitate a smoother transition from your previous operating system, read the system
requirements below before upgrading to Windows® 8:
E7671 / First Edition / August 2012
2
5. Select and click .Stereo Next
6. Tick the Front left and right option, and
click .Next
7. Click to exit the speaker setup.Finish
Turning your All-in-one PC off
Do any of the following to shut down your All-in-one PC:
• Tap from the Charm bar then tap > to do a normal shutdown.Shut down
• From the log-in screen, tap > Shut down.
• If your All-in-one PC is unresponsive, press and hold the power button for at least four
(4) seconds until your All-in-one PC turns o.
3
Entering the BIOS Setup
Windows
®
8 boot time is quite fast, so we developed three ways for you to quickly access
the BIOS (Basic Input and Output System), which stores system hardware settings that are
needed for system startup in your All-in-one PC.
To quickly access the BIOS, do any of the following:
When your All-in-one PC is o, press the power button for at least four (4) seconds to
access the BIOS directly.
Press the power button for at least four (4) seconds to shut down your All-in-one PC,
then press the power button again to turn your All-in-one PC back on, and press <F2>
during POST.
When your All-in-one PC is o, disconnect the power cord from your All-in-one PC’s
power connector. Reconnect the power cord and press the power button to turn on your
All-in-one PC. Press <F2> during POST.
NOTE: POST (Power-On Self Test) is a series of software controlled diagnostic tests that run when
you turn on your All-in-one PC.
WARNING! Inappropriate BIOS settings may result to instability or boot failure. We strongly
recommend that you change the BIOS settings only with the help of a trained service personnel.
•
•
•


Produktspezifikationen

Marke: Asus
Kategorie: Desktop
Modell: EeeTop ET2300

Brauchst du Hilfe?

Wenn Sie Hilfe mit Asus EeeTop ET2300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Desktop Asus

Bedienungsanleitung Desktop

Neueste Bedienungsanleitung für -Kategorien-