Asrock K8A780LM Bedienungsanleitung

Asrock Hauptplatine K8A780LM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Asrock K8A780LM (17 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/17

AMD RAID Installation Guide

1. AMD BIOS RAID Installation Guide …………………………………………………………………….. 2

1.1 Introduction to RAID ……………………………………………………………………………….. 2

1.2 RAID Configurations Precautions ………………………………………………………………… 3

1.3 Installing Windows OS ................................................. With RAID Funtions ………… ……… 3

1.3.1 Installing Windows XP / XP 64-bit With RAID Funtions …………………………………. 3

1.3.2 Installing Windows Vista / Vist7 / 7 64-bit / a 64-bit With RAID Funtions …… ……….. 4 ..

1.4 Create Disk Array ………………………………………………………………………………….. 5

2. AMD Windows RAID Installation Guide ……………………………………………………………… 10

2.1 Components of RAIDXpert Installation Software ……………………………………………. 10

2.2 Browser Support ………………………………………………………………………………… 10

2.3 Installing RAIDXpert ……………………………………………………………………………. 10

2.4 Logging into RAIDXpert ………………………………………………………………………… 13

2.5 Regular Connection……………………………………………………………………………... 13

2.6 Secure Connection………………………………………………………………………………. 13

2.7 Creating a New Logical Drive ………………………………………………………………….. 14

2.8 Connecting to RAIDXpert from the Internet ………………………………………………….. 17

2.9 Running RAIDXpert without Network Connection …………………………………………… 17

1. AMD BIOS RAID Installation Guide

AMD BIOS RAID Installation Guide is an instruction for you to configure RAID functions by using the onboard

FastBuild BIOS utility under BIOS environment. After you make a SATA / SATAII driver diskette, press <F2> to enter

BIOS setup to set the option to RAID mode by following the detailed instruction of the “User Manual” in our support CD

or “Quick Installation Guide”, then you can start to use the onboard FastBuild BIOS utility to configure RAID.

1.1 Introduction to RAID

The term “RAID” stands for “Redundant Array of Independent Disks”, which is a method combining two or more hard

disk drives into one logical unit. For optimal performance, please install identical drives of the same model and

capacity when creating a RAID set.

RAID 0 (Data Striping)

RAID 0 is called data striping that optimizes two identical hard disk drives to read and write data in parallel, interleaved

stacks. It will improve data access and storage since it will double the data transfer rate of a single disk alone while the

two hard disks perform the same work as a single drive but at a sustained data transfer rate.

WARNING!!

Although RAID 0 function can improve the access performance, it does not provide any fault tolerance. Hot-Plug any HDDs of the

RAID 0 Disk will cause data damage or data loss.

RAID 1 (Data Mirroring)

RAID 1 is called data mirroring that copies and maintains an identical image of data from one drive to a second

drive. It provides data protection a entire system since the disk array nd increases fault tolerance to the

management software will direct all applications to the surviving drive as it contains a complete copy of the data in

the other drive if one drive fails.

RAID 10 (Stripe Mirroring)

RAID 0 drives can be mirrored using RAID 1 techniques, resulting in a RAID 10 solution for improved performance

plus resiliency. The controller combines the performance of data striping (RAID 0) and the fault tolerance of disk

mirroring (RAID 1). Data is striped across multiple drives and duplicated on another set of drives.

JBOD

JBOD stands for “Just a Bunch of Disks” and normally refers to one or more physical drives working independently.

The AMD SB710 controller offers the added feature of concatenation, where the capacity of multiple drives is

added together. When one drive is full, the data is saved to the next drive automatically. As independent physical

drives, JBOD does not offer the performance or security advantages of RAID logical drives. However, in RAIDXpert,

you create, manage, and delete a JBOD the same as a logical drive. You can designate from two to four physical

drives with online capacity expansion. If you attach a single physical drive that was previously partitioned, RAIDXpert

will recognize it as a JBOD. However, RAIDXpert does not allow you to create a single-drive JBOD.

RAID Ready

RAID Ready arranges individual physical drives the same as if they were attached to the PC’s motherboard controller.

The advantage is that the AMD SB710 Controller can accommodate up to four physical drives, more than most PC

motherboards. As a single physical drive, RAID Ready does not offer the performance or security advantages of other

RAID logical drives. However, you can create a backup drive by: Inserting an unformatted physical drive or

designating an installed physical drive. In RAIDXpert, you create, manage, and delete a RAID Ready the same as a

logical drive. A RAID Ready logical drive has only one physical drive. You can designate from one to four of your

physical drives as RAID Ready.

1.2 RAID Configurations Precautions

1. Please use two new drives if you are creating a RAID 0 (striping) array for performance. It is recommended

to use two SATA drives of the same size. If you use two drives of different sizes, the smaller capacity hard

disk will be the base storage size for each drive. For example, if one hard disk has an 80GB storage

capacity and the other hard disk has 60GB, the maximum storage capacity for the 80GB-drive becomes

60GB, and the total storage capacity for this RAID 0 set is 120GB.

2. You may use two new drives, or use an existing drive and a new drive to create a RAID 1 (mirroring) array

for data protection (the new drive must be of the same size or larger than the existing drive). If you use two

drives of different sizes, the smaller capacity hard disk will be the base storage size. For example, if one

hard disk has an 80GB storage capacity and the other hard disk has 60GB, the maximum storage capacity

for the RAID 1 set is 60GB.

3. Please verify the status of your hard disks before you set up your new RAID array.

WARNING!!

Please backup your data first before you create RAID functions. In the process you create RAID, the system will ask if you

want to “Clear Disk Data” or not. It is recommended to select “Yes”, and then your future data building will operate under a

clean environment.

1.3 Installing Windows OS With RAID Functions

If you want to install Windows on a RAID diskOS composed of 2 or more SATA / SATAII HDDs with RAID functions,

please follow below procedures according to the OS you install.

Produktspezifikationen

Marke:	Asrock
Kategorie:	Hauptplatine
Modell:	K8A780LM
Prozessorhersteller:	AMD
Breite:	244 mm
Tiefe:	198 mm
Energiequelle:	ATX
Anzahl USB 2.0 Anschlüsse:	4
Zertifizierung:	FCC, CE, WHQL
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Audio Kanäle:	5.1 Kanäle
Kompatible Betriebssysteme:	Windows 7, Vista, XP
Prozessorsockel:	Socket 754
Anzahl VGA (D-Sub) Anschlüsse:	1
Kompatible Prozessoren:	AMD Sempron
Motherboardformfaktor:	micro ATX
Audio-Chip:	VIA VT1705
Anzahl der Speichersteckplätze:	2
Ohne ECC:	Ja
RAM-Speicher maximal:	2 GB
Maximaler Grafikkartenspeicher:	512 MB
Parallele Verarbeitungstechnologie:	Hybrid CrossFireX
Anzahl PS/2 Anschlüsse:	2
Anzahl DVI-D-Anschlüsse:	1
ATX Stromstecker (24-pol.):	Ja
Anzahl USB 2.0 Schnittstellen:	4
CPU Ventilatorstecker:	Ja
Front Panel Audiostecker:	Ja
BIOS-Speichergröße:	64 Mbit
BIOS-Typ:	AMI
LAN-Controller:	Realtek RTL8111D(L)
Zahl der parallelen ATA Stecker:	1
Eingebaute Grafikadapter:	Ja
PCI-Express x16-Slots:	1
PCI-Express x1-Slots:	1
PCI-Slots:	2
Anzahl Parallelanschlüsse:	1
Netzwerkfunktionen:	Gigabit
SATA Anschlüsse:	4
CD/AUX Audio-Eingang:	Ja
Zahl der COM Stecker:	1
Diskettenlaufwerkstecker:	Ja