Asrock 939SLI32-eSATA2 Bedienungsanleitung
Asrock
Hauptplatine
939SLI32-eSATA2
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Asrock 939SLI32-eSATA2 (51 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/51
939SLI32-eSATA2
User Manual
Version 1.1
Published February 2006
Copyright©2006 ASRock INC. All rights reserved.
No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means, except duplication of documentation by
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be regis-
tered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Specifications and information contained in this manual are furnished for informa-
tional use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warran-
ties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the manual or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
1.1 Package Contents ..................................................................... 5
1.2 Specifications ........................................................................... 6
1.3 Motherboard Layout ................................................................. 9
1.4 ASRock eSATAII+1394 I/O........................................................ 10
Pre-installation Precautions ............................................................... 11
2.1 CPU Installation ......................................................................... 12
2.2 Installation of CPU Fan and Heatsink ....................................... 12
2.3 Installation of Memory Modules (DIMM) .................................... 13
2.4 Expansion Slots (Future CPU Port, PCI and PCIE Slots) ................. 15
2.5 SLITM Operation Guide ............................................................... 17
2.6 Jumpers Setup .......................................................................... 20
2.7 Onboard Headers and Connectors .......................................... 20
2.8 eSATAII Interface Introduction .................................................. 25
2.9 SATAII Hard Disk Setup Guide .................................................. 28
2.10 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks
Installation ................................................................................. 29
2.11 Hot Plug and Hot Swap Functions for SATA / SATAII HDDs and
eSATAII Devices ........................................................................ 30
2.12 Using SATA / SATAII HDDs With RAID Functions ..................... 31
2.13 Using SATA / SATAII HDDs Without RAID Functions ................ 32
2.14 Untied Overclocking Technology .............................................. 32
3.1 Introduction ............................................................................... 33
3.1.1 BIOS Menu Bar ............................................................... 33
3.1.2 Navigation Keys ............................................................. 34
3.2 Main Screen .............................................................................. 34
3.3 Advanced Screen .................................................................... 35
3.3.1 CPU Configuration .......................................................... 36
3.3.2 Chipset Configuration ..................................................... 38
3.3.3 ACPI Configuration ......................................................... 40
3.3.4 IDE Configuration ............................................................ 41
3.3.5 PCIPnP Configuration ...................................................... 43
3.3.6 Floppy Configuration ...................................................... 44
3.3.7 Super IO Configuration ................................................... 44
3.3.8 USB Configuration .......................................................... 46
3.4 Hardware Health Event Monitoring Screen ............................. 46
3.5 Boot Screen .............................................................................. 47
3.5.1 Boot Settings Configuration ........................................... 47
3.6 Security Screen ........................................................................ 48
3.7 Exit Screen ............................................................................... 49
4.1 Install Operating System........................................................... 50
4.2 Support CD Information ............................................................. 50
4.2.1 Running Support CD ....................................................... 50
4.2.2 Drivers Menu .................................................................. 50
4.2.3 Utilities Menu ................................................................... 50
4.2.4 Contact Information ........................................................ 50
Thank you for purchasing ASRock 939SLI32-eSATA2 motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control. It de-
livers excellent performance with robust design conforming to ASRock’s commit-
ment to quality and endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-
step guide to the hardware installation. Chapter 3 and 4 contain the configuration
guide to BIOS setup and information of the Support CD.
Because the motherboard specifications and the BIOS software might be
updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest VGA cards and CPU support lists on ASRock website
as well. ASRock website http://www.asrock.com
1 x ASRock 939SLI32-eSATA2 Motherboard
(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)
1 x ASRock 939SLI32-eSATA2 Quick Installation Guide
1 x ASRock 939SLI32-eSATA2 Support CD
1 x Ultra ATA 66/100/133 IDE Ribbon Cable (80-conductor)
1 x 3.5-in Floppy Drive Ribbon Cable
4 x Serial ATA (SATA) Data Cables (Optional)
2 x Serial ATA (SATA) HDD Power Cables (Optional)
1 x ASRock eSATAII+1394 I/O Shield
1 x ASRock SLI Bridge
Platform - ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm
CPU - 939-Pin Socket Supporting AMD Athlon
TM 64 / 64FX / 64X2
Processor
- Supports AMD’s Cool ‘n’ Quiet
TM Technology
(see CAUTION 1)
- FSB 1000 MHz (2.0 GT/s)
- Supports Untied Overclocking Technology (see CAUTION 2)
- Supports Hyper-Transport Technology
Chipset - Northbridge: ULi® M1695
- Southbridge: ULi®
M1697
Memory - Dual Channel DDR Memory Technology (see CAUTION 3)
- 4 x DDR DIMM slots
- Support DDR400/333/266
- Max. capacity: 4GB
Hybrid Booster - CPU Frequency Stepless Control (see CAUTION 4)
- ASRock U-COP (see CAUTION 5)
- Boot Failure Guard (B.F.G.)
Expansion Slot - 1 x Future CPU Port (Supports CPU upgrade from AMD K8
939-Pin CPU to AM2 940-Pin CPU through AM2CPU Board)
(see page 15 for details)
- 3 x PCI slots
- 2 x PCI Express x 16 slots
- 1 x PCI Express x 4 slot
- Supports NVIDIA SLITM
Audio - Realtek ALC 660 5.1channel CODEC with High Definition
Audio
LAN - Gigabit LAN 10/100/1000 Mb/s
- PCIE x 1 Realtek RTL8111B
- Supports Wake-On-LAN
Rear Panel I/O ASRock eSATAII+1394 I/O
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x Serial Port: COM1
- 1 x Parallel Port (ECP/EPP Support)
- 4 x Ready-to-Use USB 2.0 Ports
- 1 x IEEE 1394 Port
- 2 x eSATAII Ports
- 1 x RJ-45 LAN Port
- Audio Jack: Line in / Line out / Microphone
Connector - 4 x Serial ATAII 3.0Gb/s connectors, support RAID
(RAID 0, 1, 0+1, JBOD, 5) and “Hot Plug” functions
(see CAUTION 6)
- 2 x eSATAII 3.0Gb/s connectors (shared with 2 SATAII
connectors), support “Hot Plug” function (see CAUTION 7)
- 2 x ATA133 IDE connectors (support 4 x IDE devices)
- 1 x Floppy connector
- 1 x IR header
- 1 x Game header
- CPU/Chassis FAN connector
- 20 pin ATX power connector
- 4 pin 12V power connector
- SLI/XFIRE power connector
- CD in header
- Front panel audio connector
- Front panel IEEE 1394 header
- 2 x USB 2.0 headers (support 4 USB 2.0 ports)
(see CAUTION 8)
BIOS Feature - 2Mb AMI BIOS
- AMI Legal BIOS
- Supports “Plug and Play”
- ACPI 1.1 Compliance Wake Up Events
- Supports jumperfree
- SMBIOS 2.3.1 Support
Support CD - Drivers, Utilities, AntiVirus Software (Trial Version)
Hardware - CPU Temperature Sensing
Monitor - Motherboard Temperature Sensing
- CPU Overheat Shutdown to Protect CPU Life
- CPU Fan Tachometer
- Chassis Fan Tachometer
- Voltage Monitoring: +12V, +5V, +3.3V, Vcore
OS - Microsoft® Windows® 2000 / XP / XP 64-bit compliant
Certifications - FCC, CE, Microsoft® WHQL Certificated
CAUTION!
1. For power-saving’s sake, it is strongly recommended to enable AMD’s Cool ‘n’
QuietTM technology under Windows system. See APPENDIX on page 51 to
enable AMD’s Cool ‘n’ QuietTM technology. Since not all K8 939-pin CPU can
support AMD’s Cool ‘n’ QuietTM technology, please check AMD’s website for
details.
2. This motherboard supports Untied Overclocking Technology. Please read “Un-
tied Overclocking Technology” on page 32 for details.
3. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 13 for proper installation.
4. Although this motherboard offers stepless control, it is not recommended to
perform over-clocking. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU.
5. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the motherboard
functions properly and unplug the power cord, then plug it back again. To
improve heat dissipation, remember to spray thermal grease between the
CPU and the heatsink when you install the PC system.
6. Before installing SATAII hard disk to SATAII connector, please read the
“SATAII Hard Disk Setup Guide” on page 28 to adjust your SATAII hard disk
drive to SATAII mode. Besides, you are allowed to downgrade the SATAII
hard disk to SATA hard disk (from SATAII 3Gb/s down to SATA 1.5Gb/s),
and connect it to the SATAII connector. You can also connect SATA hard
disk to SATAII connector directly.
7. This motherboard supports eSATAII interface, the external SATAII
specification. Please read “eSATAII Interface Introduction” on page 25 for
details about eSATAII and eSATAII installation procedures. (Port Multiplier
Technology is not supported with eSATAII interface on this motherboard.)
8. Power Management for USB 2.0 works fine under Microsoft
® Windows® XP
SP1 or SP2 / 2000 SP4.
1 PS2_USB_PWR1 Jumper 20 System Panel Header (PANEL1)
2 ATX Power Connector (ATXPWR1) 21 USB 2.0 Header (USB67, Blue)
3 ATX 12V Power Connector (ATX12V1) 22 Southbridge Controller
4 CPU Fan Connector (CPU_FAN1) 23 USB 2.0 Header (USB45, Blue)
5 939-Pin CPU Socket 24 Front Panel IEEE 1394 Header (FRONT_1394)
6 CPU Heatsink Retention Module 25 Infrared Module Header (IR1)
7 2 x 184-pin DDR DIMM Slots 26 Floppy Connector (FLOPPY1)
(Dual Channel A: DDR1, DDR2; Blue) 27 Game Port Header (GAME1)
8 2 x 184-pin DDR DIMM Slots 28 Front Panel Audio Header (HD_AUDIO1)
(Dual Channel B: DDR3, DDR4; Black) 29 Internal Audio Connector: CD1 (Black)
9 Northbridge Controller 30 PCI Slots (PCI1- 3)
10 Flash Memory 31 PCI Express x 16 Slot (PCIE3)
11 Primary IDE Connector (IDE1, Blue) 32 PCI Express x 4 Slot (PCIE2)
12 Secondary IDE Connector (IDE2, Black) 33 J9 / J10 Jumpers
13 Serial ATAII Connector (SATAII_BLACK) 34 PCI Express x 16 Slot (PCIE1)
14 Serial ATAII Connector (SATAII_BLUE) 35 SLI / XFIRE Power Connector
15 Chassis Fan Connector (CHA_FAN1) 36 Future CPU Port (FUTURE_CPU_PORT1)
16 Serial ATAII Connector (SATAII_RED) 37 J11 Jumper
17 Serial ATAII Connector (SATAII_ORANGE) 38 eSATAII Connector (eSATAII_BOTTOM)
18 Chassis Speaker Header (SPEAKER 1) 39 eSATAII Connector (eSATAII_TOP)
19 Clear CMOS Jumper (CLRTC1) 40 J1 / J2 / J3 / J4 / J5 / J6 / J7 / J8 Jumpers
`
FUT URE_CPU_PORT
ULi
M1697
Chipset
1
J 5
1
J 6
J 10
1
J 9
1
12 4
3 5 7 8
9
6
16
11
13
14
15
12
10
17
18
19
202122232425
26
27
29
28
30
SOCKET 939
DD R1 ( 64 /72 b it , 1 84 -p in mo du le)
DD R2 ( 64 /72 b it , 1 84 -p in mo du le)
DD R3 ( 64 /72 b it , 1 84 -p in mo du le)
DD R4 ( 64 /72 b it , 1 84 -p in mo du le)
PAR ALLEL PORT
COM1
PS2
Mo u s e
PS2
Ke ybo ar d
USB 2.0
T: USB2
B: USB3
USB 2.0
T: USB0
B: USB1
T o p:
RJ - 4 5
eS ATAII_12
T :eS AT AII_1
B: e SATA II_2
To p:
Lin e In
Ce nt er:
Lin e Ou t
Bo tto m :
Mi c In
eS ATA II_ T OP
eS ATA II_ BO T T OM
ATXPWR1
SL I/X FIRE_P WR1
J 7
1
J 8
1
J 1
1
J 2 J 3
1
J 4
PCIE1
PCIE2
PCIE3
PCI1
PCI2
PCI3
IDE2 IDE1
DDR400
Dual Channel
FSB1G
Dual Core CPU
AT X1 2 V1
1
PS2_ USB_PWR1
eSATAII
PCI
EXP RESS
RoHS
RAID
ATA133
939SLI32-eSATA2
Su per
I/O
LA N
PHY
AUDIO
CO D EC
CD1
IR 1
1
CHA_ FAN1
FLO PPY1
1
HD _AU DIO 1
HD LED R ESET
P LE D P WR BT N
USB45
1
S P EAK ER 1
1
PANEL1
11
USB67
11
GAME1
1
SATAII _R ED SATA II _BL UE
SATAII _B LAC K
SATAII _O RAN GE
2Mb
BIOS
CMO S
Ba t t er y
CLR TC1
1
SATAII
1
1
CP U _FA N1
J 11
1
5.1CH HD
USB2.0
30.5cm (12.0 in)
24.4cm (9.6 in)
31
32
33
34
35
36
37
38
ULi
M1695
Chipset
1394a
FRO N T _ 13 94
11
Gigabit LAN
39
40
1 2 3
4
5
6
789101112
1 Parallel Port 7 eSATAII Ports
2 IEEE 1394 Port 8 USB 2.0 Ports (USB01)
3 RJ-45 Port 9 USB 2.0 Ports (USB23)
4 Line In (Light Blue) 10 COM Port
5 Line Out (Lime) 11 PS/2 Keyboard Port (Purple)
6 Microphone (Pink) 12 PS/2 Mouse Port (Green)
939SLI32-eSATA2 is an ATX form factor (12.0-in x 9.6-in, 30.5 cm x 24.4 cm)
motherboard. Before you install the motherboard, study the configuration of your
chassis to ensure that the motherboard fits into it.
Take note of the following precautions before you install motherboard
components or change any motherboard settings.
Before you install or remove any component, ensure that the
power is switched off or the power cord is detached from the
power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
1. Unplug the power cord from the wall socket before touching any
component.
2. To avoid damaging the motherboard components due to static
electricity, NEVER place your motherboard directly on the carpet or
the like. Also remember to use a grounded wrist strap or touch a
safety grounded object before you handle components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-
static pad or in the bag that comes with the component.
5. When placing screws into the screw holes to secure the motherboard
to the chassis, please do not over-tighten the screws! Doing so may
damage the motherboard.
Step 1. Unlock the socket by lifting the lever up to a 90
o angle.
Step 2. Position the CPU directly above the socket such that the CPU corner with
the golden triangle matches the socket corner with a small triangle.
Step 3. Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU
into the socket to avoid bending of the pins.
Step 4. When the CPU is in place, press it firmly on the socket while you push
down the socket lever to secure the CPU. The lever clicks on the side tab
to indicate that it is locked.
After you install the CPU into this motherboard, it is necessary to install a
larger heatsink and cooling fan to dissipate heat. You also need to spray
thermal grease between the CPU and the heatsink to improve heat
dissipation. Make sure that the CPU and the heatsink are securely fas-
tened and in good contact with each other. Then connect the CPU fan to
the CPU FAN connector (CPU_FAN1, see Page 9, No. 4). For proper
installation, please kindly refer to the instruction manuals of the CPU fan
and the heatsink.
STEP 1:
Lift Up The Socket Lever
STEP 2 / STEP 3:
Match The CPU Golden Triangle
To The Socket Corner
STEP 4:
Push Down And Lock
The Socket Lever
Lever 90° Up
CPU Golden Triangle
Socket Corner
939SLI32-eSATA2 motherboard provides four 184-pin DDR (Double Data Rate)
DIMM slots, and supports Dual Channel Memory Technology. For dual channel
configuration, you always need to install identical (the same brand, speed,
size and chip-type) DDR DIMM pair in the slots of the same color. In other words,
you have to install identical DDR DIMM pair in Dual Channel A (DDR1 and
DDR2; Blue slots; see p.9 No.7) or identical DDR DIMM pair in Dual Channel B
(DDR3 and DDR4; Black slots; see p.9 No.8), so that Dual Channel Memory
Technology can be activated. This motherboard also allows you to install four
DDR DIMMs for dual channel configuration, and please install identical DDR
DIMMs in all four slots. You may refer to the Dual Channel Memory Configuration
Table below.
Dual Channel Memory Configurations
DDR1 DDR2 DDR3 DDR4
(Blue Slot) (Blue Slot) (Black Slot) (Black Slot)
(1) Populated Populated - -
(2) - - Populated Populated
(3)* Populated Populated Populated Populated
* For the configuration (3), please install identical DDR DIMMs in all four slots.
1. If you want to install two memory modules, for optimal compatibility
and reliability, it is recommended to install them in the slots of the
same color. In other words, install them either in the set of blue slots
(DDR1 and DDR2), or in the set of black slots (DDR3 and DDR4).
2. If only one memory module or three memory modules are installed
in the DDR DIMM slots on this motherboard, it is unable to activate
the Dual Channel Memory Technology.
3. If a pair of memory modules is NOT installed in the same Dual
Channel, for example, installing a pair of memory modules in DDR1
and DDR3, it is unable to activate the Dual Channel Memory Tech-
nology .
Produktspezifikationen
| Marke: | Asrock |
| Kategorie: | Hauptplatine |
| Modell: | 939SLI32-eSATA2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Asrock 939SLI32-eSATA2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Asrock
15 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
26 September 2024
22 September 2024
22 September 2024
17 September 2024
8 September 2024
3 September 2024
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Gigabyte
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine Supermicro
- Hauptplatine NZXT
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Intel
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung für -Kategorien-
7 Oktober 2024
5 Oktober 2024
27 September 2024
24 September 2024
19 September 2024
17 September 2024
16 September 2024
15 September 2024
13 September 2024
12 September 2024