Argon Sub 8 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Argon Sub 8 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Sub8
OPERATING
INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Before using this subwoofer, please read the following instructions carefully
observing all the safety hints. Please keep this manual in a safe place for future
reference.
1) Keep the power cords well protected, i.e. do not allow heavy objects to crush the
cable or leave it twisted as this may cause the cable to fray resulting in electric shock.
If you must use an extension cord, please try to keep the length to a minimum.
Common sense applies to all things electric and this subwoofer is no different in this
regard.
2) Do keep this unit in a well ventilated place making sure no drapes or other
items are placed on top or near the subwoofer as the amplifier can get quite warm
and indeed hot if the unit is not kept well ventilated. Do not place any other
objects on the subwoofer like a vase because low frequencies generated by this
subwoofer can and will move anything placed on top of the unit and can result in
spilt water. This can severely damage the unit and cause electric shock.
3) If this unit requires servicing, do not attempt to repair it yourself. Always refer
service to an authorized Argon audio service centre. High voltages are located
within the cabinet which can result in serious injury.
4) Should you notice any malfunction including a burning smell, please switch
the unit off, remove the power plug from the wall and refer the unit to your
nearest Argon audio service centre.
5) Argon audio subwoofers are designed to operate on AC240V /50/60Hz power
supply which is standard in Europe. Do not attempt to operate on any other
voltage.
TO THE CUSTOMER:
Thank you very much for purchasing this Argon audio subwoofer.
We have designed this product to be extremely easy to operate but do read the
instructions carefully to maximize your long term enjoyment. Be sure not to overload
the speakers which can easily happen if the volume is set too high. If you notice
distortion please turn the volume down quickly as permanent and expensive damage
can be caused by overloading which is not covered by warranty. You can check this
out by going to our web page www.argonaudio.com.
Rear panel Connection
Rear panel Connections of Sub8:
1) High level inputs
2) Volume knob
3) Crossover frequency control
4) Phase control
5) Power indicator
6) Power switch on/auto
7) Line in / 5.1 Subwoofer input
8) Line input
9) High level outputs
10) Power switch
11) Power cable
12) Fuse housing (T1A/250V)


Produktspezifikationen

Marke: Argon
Kategorie: Lautsprecher
Modell: Sub 8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Argon Sub 8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Argon

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-