APart SDQ5PIR Bedienungsanleitung

APart Lautsprecher SDQ5PIR

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APart SDQ5PIR (12 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

The APart SDQ5Pir powered loudspeaker set is a versatile and very compact, easy to use, plug and play

sound system. It consists of an amplied loudspeaker with a 5.25” woofer, a high frequency unit and a

second linkable passive loudspeaker, powered by the second amplier built into the active speaker. The

speakers are magnetically shielded.

The speakers can be remote controlled via the included infrared remote control, RS232 serial port or an

optional wall control panel with or without local input. The auto power off function switches off the power

amplier when no audio signal is present for a certain time. This time window can be adjusted using RS232

commands.

Further benets are: presettable maximum level, dual inputs: unbalanced on minijack and balanced on

euroblock + additional input via optional wall control unit. All inputs can be gain adjusted, used individually or

mixed together (except optional wall control panel local input source : this input can not be mixed with the A

or B or A+B inputs).

The automatic power on function will power up the speaker automatically from the standby position when

a sufciently strong audio signal is present. The threshold can be adjusted via RS232 control to suit your

needs.

• Active 2 way bass-reex speaker system

• Ideal for monitor, Audio-Video applications, multimedia applications

• Powerfull HiFi 5.25” woofer and 1” tweeter

• Mounting brackets, IR remote control and power cord included

• 2 x 30 watts RMS output power, 200 Watts PMPO dynamic

• Enhanced bass response by DTB reex tuning

• Multifunction led indicator: standby (orange), on (green), overload (red), off (led not lit)

• Hi-Q balanced inputs

• Stereo inputs on standard 3.2 mm mini stereo jack, compatible with headphone outputs and line

inputs (Computer, MP3 players)

• Input sources A, B or via optional wall panel

• Inputs A and B can be mixed together or selected individually by infrared remote control or RS232

• Magnetically shielded

• Stylish design, suited for placement in corners

• Very high efciency, high output

• Standby mode for low power consumption

• Controllable via infrared remote (included), RS232, wall panels (optional)

• RS232 control for increased integration in automated audio systems using standard 9 pin

serial cable.

• RJ45 remote wall panel connector (not compatible with computer networks or other types

of remote control cabling)

These speakers have been carefully packed at the factory. Open the carton box and remove the speakers

from the packing. Do not use sharp objects. Place the speakers on a at surface. The mounting brackets,

infrared remote control unit, power cord and speaker interconnection wire are included in the packing,

When the product shows signs of damage caused by transportation, contact your dealer immediately.

Damage due to transport and rough handling is not covered by the manufacturers warranty.

The SDQ5Pir complies with CE regulations.

1. Power switch: turn mains

power on and off.

2. Power cord inlet: attach the

power cord supplied to this

socket. The inlet also contains

the mains fuse.

3. Multifunction led: this led is

orange in standby mode, green

when the speaker is active

and red when an overload or

clipping occurs.

4. Treble control: push the +

or - button once to increase or

decrease the treble tone control

in steps of 2 dB. Push both +

and - buttons simultaneously to

reset the tone control to neutral

position.

5. Bass control: push the +

or - button once to increase or

decrease the bass tone control

in steps of 2 dB. Push both +

and - buttons simultaneously to

reset the tone control to neutral

position.

6. Master volume control: this

volume control sets the level of

the SDQ5Pir speaker.

7. Wall panel connector:

standard RJ45 connector for

connection of an optional wall

control panel. This connection is

NOT COMPATIBLE with other

networks, such as computer

networks etc. Do not attempt to

connect anything else but the

optional SDQ5Pir wall control

panels.

8. Right speaker output: output to the passive slave loudspeaker (right channel) on euroblock.

Connect the Right LS out to the euroblock connector of the slave unit (passive speaker).

9. Balanced input: input B right channel balanced input on euroblock.

10. Balanced input: input B left channel balanced input on euroblock.

11. Mono / stereo selector: switch to stereo for normal operation. For mono operation, switch to upper

position. In this case, the left input signal only is used on both channels.

12. Input A minijack: standard 3.2 mm stereo minijack connector for input A.

13. RS232 connector: standard SUB D9 connector for serial control.

14. Heatsink.

Produktspezifikationen

Marke:	APart
Kategorie:	Lautsprecher
Modell:	SDQ5PIR
Gewicht:	2850 g
Produktfarbe:	Weiß
RMS-Leistung:	60 W
Paketgewicht:	6200 g
Typ:	Tragbare Lautsprecher
Audio Kanäle:	2.0 Kanäle
THD, totalklirren:	0.07 %
Rauschverhältnis (SNR):	90 dB
Frequenzbereich:	45 - 20000 Hz
Fernbedienung:	Ja
Abmessungen (BxTxH):	182 x 170 x 252 mm
Verpackungsabmessungen (BxTxH):	210 x 440 x 270 mm
Hochtönerdurchmesser:	25.4 mm
Tieftönerdurchmesser:	133.4 mm