APart COLS101 Bedienungsanleitung

APart Lautsprecher COLS101

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APart COLS101 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

This manual applies to all types available: COLS41-COLS81- COLS101-COLS141 ( 66 mm wide)

and COLW41-COLW81-COLW101 (100mm wide).

The APart COL series speakers are more than just nice looking columns speakers: COL series

speakers have been designed as highly effective line array speakers, featuring excellent vertically

controlled directivity, wide horizontal directivity, high sensitivity and high power handling. COL

series speakers offer you very clear and natural speech reproduction, while music performs very

pleasing too.

Drastically improved audio directivity results in wider coverage range over longer distance. This

means that they cover a wider area than conventional column speakers, so less speaker-cabinets

are needed for achieving the same sound pressure level in a certain area. Also there will be

reduced problems with microphone feedback that is easily generated in reverberant locations. The

especially developed drivers with extended frequency response and low distortion give much better

speech intelligibility. COLS series acoustic response has been specically tailored for speech where

COLW series are ideal for speech and music reproduction.

Thanks to their unobtrusive appearance and excellent acoustic directivity, COL series speakers can

be used in highly reverberant spaces, such as churches, houses of worship, railway stations, as

well as conference rooms, recreational areas or sports facilities. The speaker cabinets are made of

a sturdy extruded aluminum, and all material and construction has been adapted to be used for both

indoor as outdoor, so weather proof and even impact proof (f.e. footballs).

Both 100 volt and low impedance (Lo-Z) connections are provided for increased installation exibil-

ity. 100V line with several transformer power taps as well as low impedance connectors are hidden

inside the cabinet. To access the connector, open the cabinet: remove the two philips screws at the

bottom of the enclosure, see picture below. In normal indoor situations you can feed the cable(s)

through the rubber cable sleeves, for IP66 compatibility, use the supplied cable entries and washers

provided in the accessory kit. A second cable entry point is present for easily looping the cable

through.

Mounting these speakers has never been easier. An adjustable stainless steel mounting bracket

with extension is included in the packing. The extension piece can be used to mount the speakers

under an angle. Attach the brackets according to the picture: you can mount the speaker under a

certain angle from the wall by extending the top bracket with the supplied bracket extender.

To obtain the best performance, it is VERY important to position the column correctly, this means

that the center point of the column must be precisely directed towards the height of the listeners (or

just above it) in the appointed area. For advise in acoustics, contact your dealer.

For improved security, a special mounting rail is incorporated at the back of the cabinet. You can

use M6 at head carriage or T-bolts to attach additional safety cables or special mounting brackets

(not included).

Color code internal connector:

Common (for 100 volt use or lo-Z use): Black

Lo-Z connection: White

High power tap: Red

Medium power tap: Yellow

Low power tap: Green

Note: you can only use 1 power tap at the same time: never connect the speaker to a Lo-Z and

100 volt amplier simultaneously and never use multiple 100 volt taps at the same time. Connect

the speaker correctly as required and don’t connect the unused wires. Example: for use as a lo-Z

speaker, connect the black (negative) and white (positive) wire.

Produktspezifikationen

Marke:	APart
Kategorie:	Lautsprecher
Modell:	COLS101
Breite:	66 mm
Tiefe:	66 mm
Gewicht:	3300 g
Produktfarbe:	Weiß
Übertragungstechnik:	Kabelgebunden
Impedanz:	8 Ohm
Höhe:	723 mm
Energiequelle:	AC
RMS-Leistung:	40 W
Equalizer:	Nein
Audio Kanäle:	1.0 Kanäle
Frequenzbereich:	2000 - 20 Hz
Hochtöner:	Ja
Lautsprecherplatzierung:	Flur
Verstärker:	Nein
Empfindlichkeit:	97 dB
Musik Energie:	60 W