APart CM20T-SLV Bedienungsanleitung

APart Lautsprecher CM20T-SLV

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APart CM20T-SLV (1 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

COLOUR KLEUR COULEUR POWER IMPEDANCE

Black Zwart Noir Common

RED ROOD ROUGE 2.5 Watt 4KΩ

GREEN GROEN VERT 5 Watt 2KΩ

YELLOW GEEL JAUNE 10 Watt 1KΩ

BROWN BRUIN BRUN 20 Watt 500R

• Type : 2 - Way HiFi

• Woofer : 6.5” Enforced Polypropylen

• Tweeter : 1” Silk Dome

• Rated Power RMS : 20 W / 100Volt

• Music Power RMS : 32 W / 100Volt

• Rated Power RMS : 40 W / 16Ω

• Music Power RMS : 60 W / 16Ω

• Sound Pres. Level (SPL) 1W/1M : 92dB

• Frequency range : 60 Hz - 20 kHz

• Trafo Power Tappings : 20 - 10 - 5 - 2.5W

• Dispersion @ 1-4-8 KHz : 180°- 80° - 45°

• Dimensions outside Ø : 205MM

• Dimensions Cutout Ø : 183MM

• Depth : 80MM

• Weight : 1.62Kg

The APart CM20T 2-way built-in loudspeaker can be

used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use,

you can connect up to 4 loudspeakers in parallel on each channel of a

standard 4 Ohm amplier. For 100 use, the CM20T is equipped with a high-

quality 20 Watt 100 Volt transformer with several power tappings. Therefore

it can be used with high ceilings or places where more back ground noise is

present. The loudspeaker has a 6 ½” enforced Polypropylen woofer what re-

sults in a very low distortion. To complete the sound a 1” tweeter has been in-

tegrated. It makes the CM20T very suitable for the distribution of microphone

calls and back ground music. The housing is made of high quality ABS.

The woofer is made out of enforced polypropylen, what makes it moisture-

proof. The standard colour is white. From 12 pieces on, the loudspeakers

can be painted optionally in any other RAL colour

20 20 10 5 5 5 2.5 2.5++ + + + + +70 Watt =

120Watt Amplier

Amplier power must be higher than total power of all speakers.

Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.

La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.

16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω

4Ω 4Ω

Disconnect 100Volt transformer

16 ohm connection

The loudspeaker is easy to install,

due to its simple, quick mounting system

3 screws which are hidden behind the loud-

speaker grill, what gives the loudspeaker a

modern and striking design.

Cutout Ø : 183 MM

Remove the grill before mounting.

You can see four Philips head screws.

Use these screws to thigthen the dog-ears.

Picture shown is the CMS20T

Produktspezifikationen

Marke:	APart
Kategorie:	Lautsprecher
Modell:	CM20T-SLV
Gewicht:	1400 g
Produktfarbe:	Silber
Impedanz:	16 Ohm
Material:	Polypropylen (PP)
Typ:	Unterputz/auf Putz/Decke Lautsprecher
Audio Kanäle:	2.0 Kanäle
Frequenzbereich:	60 - 20000 Hz
Hochtöner:	Ja
Abmessungen (BxTxH):	205 x 80 x 205 mm
Hochtönerdurchmesser:	25.4 mm
Musik Energie:	60 W
Tieftönerdurchmesser:	165.1 mm