Antari X-30 MK3 Bedienungsanleitung
Antari
Effektmaschine
X-30 MK3
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Antari X-30 MK3 (12 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
READ ANDî˜ SAVE THESEî˜ INSTURCTIONS
2009 Antariî˜ Lightingî˜ &î˜ Effectsî˜ Ltd.
X-30î˜ WIRELESSî˜ CONTROL MODULE
USERî˜ MANUAL
BEDIENUNGSANLEITUNG
Userî˜ Manual
Antariî˜ X-30î˜ Wirelessî˜ Controlî˜ Module
Congratulationsî˜ onî˜ theî˜ purchaseî˜ ofî˜ yourî˜ new
A X-30ntari Wirelessî˜ Controlî˜ Module
Userî˜ Manual 01
Thank you for choosing the Antari X-30. The transmitter and the
receiving unit serve for wireless control of Antari X-310, X-510, X-515, and X-530
fog machines. The system operates with the fixed UHF frequency 433.920 MHz. The
transmission range is approx. 50 m and depends on the local conditions.
The system is designed for indoor use only. Never
remove the serial barcode from the devices as this would make the guarantee void.
wireless control module
REV3
The transmitter
operates with a 12 V battery type 23A.
-Introduction
This product is in accordance with the R&TTE directive (Radio and Telecommunication
Technical Equipment) of the European Union and falls into equipment Class 1. In all EU
member countries, the operation of this wireless system is generally approved by the
national telecom regulatory authority. The system is license-free. In some countries
outside the EU, the operation of this wireless system may needs to be approved by the
national telecoms regulatory authority.
-Approval








Keep this device dry.
For indoor use only. Not designed for outdoor use.
Ideal operating temperature is between 0° and 40° Celsius.
No user serviceable parts inside. Refer to your Antari dealer or other authorized service
personnel.
For adult use only.
Never use aggressive cleansing agents or chemicals for cleaning.
If the remote control is not used for a longer period, please remove the battery. Dispose of
used batteries properly to save the environment.
Damage, caused by manual modifications on the device are not subject to warranty. If the
device is used for other purposes than originally intended, or if it is not correctly operated
or not repaired, the product may suffer damages and the guarantee becomes void.
-Safetyî˜ Instructions
X-30
This wireless module consists of a transmitter equipped with two buttons for fog on and off
and a receiving unit with a 2-meter line, a 5-pin XLR connector and an LCD panel
displaying all operation statuses of the fog machine. The interface allows the operator to
customize fog machine functions by adjusting the fogging duration, interval, and volume
as well as the heater and the DMX and RF address. There are six buttons on the control
board. All current operating parameters are automatically stored in non-volatile memory,
allowing the machine to be powered down without losing function settings.
Screw the supplied antenna to the receiving unit. Connect the receiving unit to the
corresponding input jack on your fog machine. The jack has a latching. To remove the plug,
press the lever. Fix the receiving unit to the fog machine with the fixation screws. After
switching on, the display shortly indicates the fog machine starts with
the warm-up process and the display indicates Warming Up . While the unit is warming
up, fog output will not be possible yet. Program the necessary menu settings with the
control panel of the receiving unit. Once the warm up process is completed, fog output will
be possible. The display indicates Ready to Fog .
»Antari X-30«. Then
» «
-
» «
Use the button FUNCTION to enter the menu. Press the button FUNCTION so many times
until the desired menu item is shown in the display. Then press the button ENTER
[VOLUME] to enter the menu item. Use the buttons UP and DOWN to adjust values.
Confirm your settings with the button ENTER [VOLUME] or exit the menu item with the
button ESC [TIMER]. Never wait for more than 5 seconds to press the next button,
otherwise the setting procedure will be stopped.
-Configuration of the buttons
-Receivingî˜ unit
TRANSMITTER RECEIVINGî˜ UNIT
Blueî˜ (on)
Redî˜ (off)
Controlî˜ LED
Clip
Antenna
LCDî˜ screen
Connectionî˜ cable
Functionî˜ buttons
Fixationî˜ screws
1.
Volume
Timer
DMX
Heater
RF Addr.
Interval
Volume
Duration
2.î˜ î˜ î˜ î˜ î˜ î˜ î˜ î˜ î˜ î˜ î˜ UP andî˜ DOWN
3. TIMER/ESC
4.î˜ î˜ î˜ î˜ î˜ î˜ î˜ VOLUME/ENTER
5.î˜ î˜ î˜ î˜ î˜ î˜ î˜ MANUAL/ON/OFF
TIMER
VOLUME
MANUAL
FUNCTION
VOLUME
ESC ENTER ON / OFF
TIMER MANUAL
-Setupî˜ andî˜ Operation
Userî˜ Manual 02
X-30
DIP switches
Produktspezifikationen
| Marke: | Antari |
| Kategorie: | Effektmaschine |
| Modell: | X-30 MK3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Antari X-30 MK3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektmaschine Antari
6 September 2024
27 August 2024
19 August 2024
18 August 2024
17 August 2024
17 August 2024
17 August 2024
16 August 2024
15 August 2024
14 August 2024
Bedienungsanleitung Effektmaschine
- Effektmaschine NGS
- Effektmaschine Velleman
- Effektmaschine König
- Effektmaschine Pyle
- Effektmaschine BeamZ
- Effektmaschine Stairville
- Effektmaschine American DJ
- Effektmaschine Karma
- Effektmaschine Adj
- Effektmaschine Behringer
- Effektmaschine Eurolite
- Effektmaschine Showtec
- Effektmaschine Monoprice
- Effektmaschine Lexicon
- Effektmaschine Monacor
- Effektmaschine HQ
- Effektmaschine Viking
- Effektmaschine Elation
- Effektmaschine Cameo
- Effektmaschine HQ Power
- Effektmaschine Qtx
- Effektmaschine Midas
- Effektmaschine Black Lion Audio
- Effektmaschine Martin
- Effektmaschine Steren
- Effektmaschine TCM FX
- Effektmaschine Fun Generation
- Effektmaschine Futurelight
- Effektmaschine IMG Stage Line
- Effektmaschine TC Electronic
- Effektmaschine Lab Gruppen
- Effektmaschine Hazebase
- Effektmaschine Doepfer
- Effektmaschine Chauvet
- Effektmaschine Valueline
- Effektmaschine Laserworld
- Effektmaschine Klark Teknik
- Effektmaschine Eliminator Lighting
- Effektmaschine BoomTone DJ
- Effektmaschine Sagitter
- Effektmaschine Drawmer
- Effektmaschine DJPower
- Effektmaschine The Confetti Maker
- Effektmaschine Blizzard
- Effektmaschine ColorKey
- Effektmaschine Lotronic
- Effektmaschine Valcom
- Effektmaschine Evo-Lite
- Effektmaschine IGS Audio
- Effektmaschine Magmatic
- Effektmaschine Technical Pro
- Effektmaschine Rosco
- Effektmaschine Showven
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
8 Oktober 2024
6 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
25 September 2024