Anchor Audio MEGA-7500U2 Bedienungsanleitung

Anchor Audio Lautsprecher MEGA-7500U2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Anchor Audio MEGA-7500U2 (7 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

MADE IN USA

SIX YEAR WARRANTY

MegaVox Pro Public Address System Owners Manual

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

MADE IN USA

SIX YEAR WARRANTY

A Message from the President

Congratulations on purchasing an Anchor Audio sound system, the choice of thousands

of satisﬁed customers including the White House, prestigious universities, school

districts nationwide, police and ﬁre departments, and all branches of the U.S. military.

Our products are made of the ﬁnest materials and built with pride in the U.S.

We’ve incorporated the latest technology into your sound system yet kept it simple to

use. Just take a few minutes to review this manual to ensure the maximum enjoyment

of your Anchor system. Or, you can view a demonstration video complete with a trouble

shooting section at www.anchoraudio.com.

Feel free to call our friendly customer support staff at 1-800-ANCHOR1 Monday thru

Friday between 7:00am and 5:00pm Paciﬁc Standard Time with any questions. We love

to hear from our customers.

Janet Jacobs, President

on behalf of all Anchor employees

GETTING STARTED / WARRANTY INFORMATION 1 .......................................................................

BASIC SYSTEM OPERATION 2 ....................................................................................................

CONNECTING PA SYSTEM / CONTROLLING FEEDBACK 3 ............................................................

OPERATING THE BUILT-IN UHF WIRELESS RECEIVER 4 .................................................................

OPERATING THE WIRELESS MICROPHONE / TRANSMITTER ....................................................... 5

CARING FOR YOUR BATTERY 6 ...................................................................................................

HAVING TROUBLE WITH YOUR SOUND SYSTEM? / TECHNICAL SPECIFICATIONS ......................... 7

CONTENTS

GETTING STARTED

Please check your new unit carefully for any

damage which may have occurred during shipment.

Each Anchor product is carefully inspected at the

factory and packed in specially designed boxes for

safe transport.

Notify the freight carrier immediately of any damage

to the shipping box or product. Repack the unit

in the original box and wait for inspection by the

carrier’s claim agent. Notify your dealer of the

pending freight claim.

NOTE: All damage claims must be made with freight carrier!

RETURNING SYSTEMS FOR SERVICE

OR REPAIR

For service or repair, please contact the dealer

you purchased your system from or Anchor Audio

Customer Service at 800.262.4671 to obtain a

(Return Authorization)

number. You may

also complete an online RA request form at

www.anchoraudio.com. All shipments to Anchor

Audio must include a RA number and must be

shipped prepaid. C.O.D. shipments will be refused

and returned at your expense.

IMPORTANT: Save the shipping box & packing materials,

they were specially designed to ship your unit!

WARRANTY REGISTRATION

Visit our website at www.anchoraudio.com and

select “Warranty Registration.” Complete the online

form to activate the six-year limited warranty on

your MegaVox Public Address System and two-year

limited warranty for the microphones.

100-0058-000 rev. A 12/10

MADE IN USA

SIX YEAR WARRANTY

MegaVox Pro Public Address System Owners Manual

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

BACK PANEL OF MEGA-6000U2

BASIC SYSTEM OPERATION

NOTE: Fully Charge Batteries Before First Use!

IMPORTANT: Make all connections with shielded cables to avoid

hum, buzzing or interference.

1. Before turning the systems power on: Set all Input

Level Controls

2. Plug a microphone into a MIC jack and/or a line-level

audio source into the LINE IN jack

3. Switch POWER to ON - The red BATTERY LED will turn

(If the light ﬂashes or stays off charge the battery)

4. Slowly increase the Level Controls for the input jacks

used to desired volume level

WIRELESS RECEIVERS

(see page 4)

WIRELESS LEVEL CONTROLS

MIC - INPUT JACK

1/4” Phone - Unbalanced,

low impedance, no

phantom power

LINE IN - INPUT JACK

1/4” Phone - For any line-level

signal source: tape/VCR/CD/DVD

players, musical instruments, etc.

CHARGER INPUT JACK

SPEAKER OUT -

OUTPUT JACK

1/4” Phone - Drives the MEGA-6001

unpowered companion speaker

Using companion speaker will decrease

battery service time requiring more

frequent charging

MIC/SIGNAL ALERT

LEVEL CONTROL

LINE IN

LEVEL CONTROL

LINE OUT - OUTPUT JACK

1/4” Phone - Unbalanced, combined

output of all active system inputs

(Output is post source level; any volume

ﬂuctuations for a speciﬁc input will

affect this output signal level)

BATTERY CHARGE

INDICATOR

POWER SWITCH

SIGNAL ALERT BUTTON

System emits a loud, air-horn type tone

Push & hold button to activate siren

and control volume with MIC/SIGNAL

control

CAUTION: The signal alert sound can produce VERY high or harmful sound pressure levels that can cause hearing damage.

SPEAKER STAND SETUP

1. Loosen the Lower Collar Knob

2. Separate the stand legs until the leg support Cross

Braces are parallel to the ﬂoor

3. Tighten the Lower Collar Knob

4. Loosen the Upper Collar Knob and extend the

center pole

5. Adjust height and retighten the Upper Collar Knob

6. Place your Anchor sound system on the stand

LOWER

COLLAR KNOB

UPPER

COLLAR

KNOB

CROSS BRACES

MADE IN USA

SIX YEAR WARRANTY

MegaVox Pro Public Address System Owners Manual

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

CONTROLLING FEEDBACK

Feedback, a howling noise or shrill sound, is self-generated by the sound system. It’s caused by

a microphone picking up the sound coming from the speaker and then re-amplifying it. Once a

feedback loop starts, it continues until the system is adjusted.

FEEDBACK CAUSES

• Microphonetooclose,pointingtowards

or in front of speaker

• Volumesettingistooloudforroom

• Soundreectingoffhardsurfaces

AVOIDING & ELIMINATING FEEDBACK

• Pointmicrophoneinadifferentdirection

• Keepmicrophoneawayfromthespeaker

• PlacespeakerinFRONTofthemicrophone

• Reducethesoundsystemvolumelevels

CAUTION: Feedback can damage your equipment & may be hazardous to hearing.

CORRECT SYSTEM PLACEMENT WRONG SYSTEM PLACEMENT

CONNECTING TWO OR MORE MEGAVOX PRO PA SYSTEMS

UNPOWERED MEGAVOX PRO COMPANION SPEAKER

(MEGA-6001)

Connect one end of a speaker cable

(SC-50)

to the SPKR OUT jack on the back of a

powered MegaVox PRO PA system.

The other end connects to the jack labeled IN on the back of a MegaVox PRO

unpowered companion speaker.

NOTE: AC power is not required for an unpowered companion speaker.

POWERED MEGAVOX PRO PA SYSTEMS WITH LINE OUT

Connect speaker cable

(EX-50PP)

from LINE OUT on ﬁrst powered MegaVox PRO to

LINE IN on second powered MegaVox PRO. Set volume level of the second system to

maximum, this gives full volume control to the ﬁrst or primary PA system.

DAISY-CHAINING

Use the Line Out method above to connect up to six powered MegaVox PRO PA

Systems. Make all connections with power off.

Set volume level to maximum on all secondary systems so the primary unit Level

Control sets the volume for the entire chain.

To avoid speaker popping, which can cause damage, power speakers on in order,

primary unit ﬁrst, and power speakers off in reverse order, primary unit last.

FIRST POWERED MEGAVOX PRO

SECOND POWERED

MEGAVOX PRO

EX-50PP CABLE

Produktspezifikationen

Marke:	Anchor Audio
Kategorie:	Lautsprecher
Modell:	MEGA-7500U2
Akku-/Batteriebetriebsdauer:	10 h
Breite:	230 mm
Tiefe:	360 mm
Gewicht:	6800 g
Empfohlene Nutzung:	andere
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Akku-/Batterietyp:	5.4 AH
Höhe:	13 "
Stecker:	8 Ω, 1/4", Lo-Z, Hi-Z
RMS-Leistung:	22 W
Equalizer:	Nein
AC Eingangsspannung:	110 - 220 V
AC Eingangsfrequenz:	50 - 60 Hz
Eingebauter Ethernet-Anschluss:	Nein
Schnellstartübersicht:	Ja
Stromverbrauch (Standardbetrieb):	40 W
Audio Kanäle:	- Kanäle
Frequenzbereich:	400 - 10000 Hz
Ein-/Ausschalter:	Ja
Mikrofon-Eingang:	Ja
Woofer:	Nein
Hochtöner:	Nein
Akkus/Batterien enthalten:	Ja
Lautsprecherplatzierung:	Flur
Empfindlichkeit:	126 dB
Audio-RCA-Eingänge:	1
Stromeingang:	Ja
Tiefe (imperial):	14 "
Breite (imperial):	9 "