Allen & Heath SQ-7 Bedienungsanleitung

Allen & Heath Mischer SQ-7

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Allen & Heath SQ-7 (4 Seiten) in der Kategorie Mischer. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
Safety
Before powering on the SQ, read the safety instructions sheet (AP9240/CL1-1) that is supplied along with this
guide. For your own safety and that of the operator, technical crew and performers, follow all instructions and
heed all warnings included in these documents and printed directly on the equipment.
Registration
To be kept informed of updates, the latest firmware and new releases for the SQ range, register your SQ-7 at
www.allen-heath.com/register
Firmware and Reference Guide
This introduction is intended to give you an overview of the SQ-7 hardware and outline operating principles.
Visit to obtain the latest version of firmware and reference guide. The latest firmware is www.allen-heath.com
required if you intend to use any SQ Apps with your SQ.
Ventilation
The SQ uses fans for cooling. Adequate space must be left for air flow around fans and vents when in use.
Introduction
Features
The SQ is a high resolution 96kHz audio mixing console. It has been designed using the latest technology to
provide the most detailed and accurate sound quality, along with a range of options for expandability and
integration.
AP11350
Issue 1
Accessories
SQ-BRACKET Detachable Metal Bracket for iPad/tablet
AP11334 Water repellent polyester dustcover with printed logo for SQ-7
AR84 8 XLR input, 4 XLR output, dSnake Remote AudioRack (Rackmount)
AR2412 24 XLR input, 12 XLR output dSnake Remote AudioRack (Rackmount)
AB168 16 XLR Input, 8 XLR Output, dSnake Remote AudioRack (StageBox/Rackmount)
DX168 16 XLR Input, 8 XLR Output, 96kHz DX Remote AudioRack (StageBox/Rackmount)
DX164-W 16 XLR Input, 4 XLR Output, 96kHz DX Wall Mount Audio Expander
DX-HUB Remote Audio Hub with 4 DX Link ports (Rackmount kit available)
AH9650 100m drum of EtherFlex Cat5e with locking Neutrik EtherCon connectors
AH9981 50m drum of EtherFlex Cat5e with locking Neutrik EtherCon connectors
AH9651 20m of Neutrik EtherFlex Cat5e with locking Neutrik EtherCon connectors
SLink Port Compatibility Sample Rate Protocol Max Length
DX168, DX16
4
-
W, DX Hub
DX
100m
Cat5e or higher
AR2412, AR84, AB168 48kHz dSnake 120m Cat5e or higher
ME-U, ME-1, ME-500 48kHz dSnake Cat5e or higher
SQ Range
48 input channels with preamp, HPF, PEQ, gate, comp, delay
32 output channels (LR, 12 mono/stereo Mix, 3 Stereo Matrix)
8 stereo FX with dedicated return channels
8 Mute groups, 8 DCA groups
Source patching (Local, SLink remote, Option card, USB)
Output socket
and Insert I/O patching
Multi-channel USB streaming and direct to USB drive recording
Talkback mic input, dual footswitch control, wireless control
SQ-7 Specific
192 fader strips (32+1 faders, 6 layers)
32 local mic/line input sockets
3 local stereo line input sockets
16 XLR + 2 TRS output sockets
16 assignable SoftKeys
8 assignable Soft Rotaries with LCD
Displays
Local Mic/Line Inputs
Local Stereo Line Inputs
Talkback Mic Input
Local XLR Outputs
Local TRS Jack Outputs
AES Digital Output
Mono/Dual Footswitch Connection
Touch Screen, Screen
Select Keys and Screen
Encoder
View processing and access
the routing and setup menus
using keys below. Touch to
select a parameter and use
the rotary to adjust values.
Fader Strips and Layer
Select Keys
6 layers of 32 faders provide
192 assignable strips for
access to any combination
of channels, returns,
masters and DCAs. Each
strip has fader, mute, select
and PAFL keys, peak and
signal meter.
Ident Strip
LCD displays show channel
name and colour for each of
the 32 strips. Press the
‘View’ key to see secondary
information such as input
source.
Channel
(Pre/HPF/Gate/Comp)
Physical controls for the selected channel. Preamp, HPF
frequency, Gate threshold, Comp threshold.
Channel (PEQ/GEQ)
Physical controls
for the selected channel. EQ band select
keys and parametric controls. Use the ‘Fader Flip’ key to
present selected mix GEQ on faders.
Pan Control
Master Strip and Mix Select Keys
Press a blue ‘Mix’ k
e
y to present its sends on the 32
faders
and its master on the master fader strip. Select ‘LR’ to work
with the main LR mix and channel faders.
FX Send Select Keys
Press a blue ‘FX’ ke
y to present its sends on the 32
faders
and its master send on the master fader strip.
Headphone Output and Level Control
Main Meter
Displays the LR Mix or selected PAFL signal level.
Talk Key
Momentary or latching switch for the talkback microphone.
Mains Power Input and Switch
I/O Port - Option Card
Multi-format multi-channel digital audio
USB-B Port
Connection to a computer for multi-channel audio and MIDI I/O
Network Port
Connect to a router
for network/wireless control
SLink Port
For connection to Allen&Heath remote audio racks, including AB,
AR and DX ranges, as well as the ME personal monitoring system
SQ-Drive Port
Record/play audio direct to/from a USB drive. Transfer scene, show
and library data using a USB key. Update SQ firmware.
ST3 Input
3.5mm stereo jack input, can be used for connection to an external
background music device.
Pre Fade and Assign Keys
Hold ‘Pre-Fade’ and press ‘Sel’ to toggle channels pre or post fade
to the mix. Hold ‘Assign’ and press ‘Sel’ to route channels to the
selected mix.
CH to All Mix Key
Press and hold to present all sends to mixes for the currently
selected channel. The ident strip displays mix names.
Copy/Paste/Reset Keys
Used to copy, paste or reset processing blocks or channel
parameters.
Library Key
Opens different libraries to enable save and recall of presets for
channel/mix/FX processing.
Assignable SoftKeys
Use Setup screen to assign functions such as mutes, tap tempo,
scene recall, SQ-Drive control and more.
Assignable Encoders
Use Setup screen to assign functions for quick access to often
used parameters.
Powering Off
i. Power off any connected amplifiers or powered speakers.
ii. Navigate to the ‘Home’ screen and select ‘Shut Down’
iii. Switch off the unit using the push switch (27).
Workflow
Press
a blue ‘
LR
’
,
‘
Mix
’
or
‘
FX
’
Key to present send
levels
for the selected Mix
on
the 24
Fader Strips
.
Use the Layer Keys (2) to move through the 6 layers of faders and adjust individual levels.
The Master strip (7) controls the master send level of the selected Mix/FX.
Select a strip by pressing the green ‘Sel’ Key on a Fader Strip (2) or the Master Strip (7).
The physical controls (4), (5) and (6) can now be used to adjust parameters for the selected strip.
Go to the ‘Processing’ screen to see an overview of the processing for the selected strip.
Tap on any part of the processing to see a detailed view, then touch a parameter on-screen and use
the touch screen encoder (1) to adjust.
Mute Keys are illuminated when a strip is muted.
By default, PAFL (Pre/After Fade Listen) Keys allow you to route one channel at a time to the PAFL
bus/Phones output. PAFL settings can be changed in the ‘Setup’ screen.
Mix sends set to ‘Post Fade’ follow the LR send levels. To toggle channels between ‘Pre Fade’ and
‘Post Fade’ for the selected Mix, hold the ‘Pre Fade’ Key and use ‘Sel’ Keys.
To assign or un-assign a strip from the currently selected mix, hold the ‘Assign’ Key and use ‘Sel’ Keys.
Pressing and holding the ‘CH to All Mix’ Key will display the send levels for the currently selected strip
across the main fader strips.
Press the ‘FX’ Key to see and adjust FX engines.
Use the ‘Library’ Key (17) to recall FX types and presets - change parameters by selecting on-screen
and using the touch screen encoder.
FX busses 1 to 4 (8) send to FX engines 1 to 4 by default.
FX Return channels can be routed to Mixes in the same way as stereo input channels.
Hold the ‘Copy’ Key and press an ‘In’ Key (4) (5), a ‘Sel’ Key (2) (7),
to copy
parameters
.
Hold the ‘Paste’ Key and press a ‘Sel’ Key (2) (7) to paste the copied processing to another channel.
Hold the ‘Reset’ Key and press an ‘In’ Key (4) (5), a ‘Sel’ Key (2) (7), or on-screen to reset parameters.
Storing and Recalling
A ‘Scene’ is used to store or recall a mix. A ‘Show’ comprises multiple scenes and all settings.
Press the ‘Scenes’ Key to access the list of scenes in the current show.
Use a combination of scene filters and ‘Safes’ to decide which settings/parameters/strips are affected when a
scene is recalled.
Powering On
i. Connect power lead (27).
ii. Connect input sources using (20), (21) and (22).
iii. Connect outputs (23) and (24) to amplifiers, speakers or line level inputs on other equipment.
iv. If required, connect digital I/O such as AudioRacks or Computers using (25), (28), (29) and (31).
v. If you are using a footswitch, connect this (26).
vi. Switch on the SQ using the push switch (27).
vii. Power on any connected amplifiers or powered speakers.
Setup
To reset all mix, parameter and routing settings go to the ‘Scenes’ screen (1), then press and hold the ‘Reset Mix
Settings’ button. This will ‘zero’ the desk without deleting saved scenes or libraries.
To check or alter patching, go to the ‘I/O’ screen (1) and use the matrix to patch from Local/Digital Inputs to SQ
input channels, and to patch SQ outputs [LR/Mix/Group/Matrix/DirectOut] to Local/Digital Outputs.

Produktspezifikationen

Marke: Allen & Heath
Kategorie: Mischer
Modell: SQ-7

Brauchst du Hilfe?

Wenn Sie Hilfe mit Allen & Heath SQ-7 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Mischer Allen & Heath

Allen & Heath

Allen & Heath GL2200 Bedienungsanleitung

28 Mai 2024
Allen & Heath

Allen & Heath dLive S3000 Bedienungsanleitung

24 April 2024
Allen & Heath

Allen & Heath MixWizard WZ4-12 Bedienungsanleitung

17 April 2024
Allen & Heath

Allen & Heath ZED-18 Bedienungsanleitung

16 April 2024
Allen & Heath

Allen & Heath PA-CP Bedienungsanleitung

14 April 2024
Allen & Heath

Allen & Heath Xone:96 Bedienungsanleitung

31 März 2024
Allen & Heath

Allen & Heath PA20 Bedienungsanleitung

24 März 2024
Allen & Heath

Allen & Heath Qu-Pac Bedienungsanleitung

17 März 2024
Allen & Heath

Allen & Heath XONE:DB4 Bedienungsanleitung

20 Februar 2024
Allen & Heath

Allen & Heath ZEDi-10 Bedienungsanleitung

18 Februar 2024

Bedienungsanleitung Mischer

Neueste Bedienungsanleitung für -Kategorien-

WMF

WMF Kult Black mixer Bedienungsanleitung

27 August 2024
WMF

WMF 0416240011 KULT X Bedienungsanleitung

27 August 2024
WMF

WMF 0416210001 Lono Bedienungsanleitung

27 August 2024
WMF

WMF Coup - 0416290011 Bedienungsanleitung

27 August 2024
WMF

WMF 0416230011 KULT X Bedienungsanleitung

27 August 2024
WMF

WMF 0416170011 Lineo Bedienungsanleitung

27 August 2024
Moulinex

Moulinex LM2201B1 Mixer Bedienungsanleitung

27 August 2024
Moulinex

Moulinex Optipro Mixer Bedienungsanleitung

27 August 2024
Moulinex

Moulinex HM2000 Mixer Bedienungsanleitung

27 August 2024
Turmix

Turmix CX 500 - A31125 Bedienungsanleitung

27 August 2024