Allen & Heath MIXWIZARD WZ4 16:2 Bedienungsanleitung

Allen & Heath Mischer MIXWIZARD WZ4 16:2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Allen & Heath MIXWIZARD WZ4 16:2 (32 Seiten) in der Kategorie Mischer. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/32

USER GUIDE

Publication AP8665

MixWizard WZ

16:2 and WZ

12:2

Allen & Heath 2 WZ

16:2 and 12:2 User Guide

Limited One Year Warranty

This product is warranted to be free from defects in materials or workmanship for

period of one year from the date of purchase by the original owner.

To ensure a high level of performance and reliability for which this equipment has been

designed and manufactured, read this User Guide before operating. In the event of a

failure, notify and return the defective unit to ALLEN & HEATH Limited or its

authorised agent as soon as possible for repair under warranty subject to the following

conditions

Conditions Of Warranty

The equipment has been installed and operated in accordance with the instructions in

this User Guide.

The equipment has not been subject to misuse either intended or accidental, neglect,

or alteration other than as described in the User Guide or Service Manual, or approved

by ALLEN & HEATH.

Any necessary adjustment, alteration or repair has been carried out by ALLEN &

HEATH or its authorised agent.

This warranty does not cover fader wear and tear.

The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its

authorised agent with proof of purchase.

Units returned should be packed to avoid transit damage.

In certain territories the terms may vary. Check with your ALLEN & HEATH agent for

any additional warranty which may apply.

This product has been tested to EN55103 Parts 1 & 2 2009 for use in Environments E1, E2,

E3, and E4 to demonstrate compliance with the protection requirements in the European

EMC directive 2004/108/EC. During some tests the specified performance figures of the

product were affected. This is considered permissible and the product has been passed as

acceptable for its intended use. Allen & Heath has a strict policy of ensuring all products

are tested to the latest safety and EMC standards. Customers requiring more information

about EMC and safety issues can contact Allen & Heath.

NOTE: Any changes or modifications to the console not approved by Allen & Heath

could void the compliance of the console and therefore the users authority to operate it.

Allen & Heath WZ

16:2 and 12:2 User Guide AP8665 Issue 1

Allen & Heath Limited

Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK

http://www.allen-heath.com

This product complies with the European Electromagnetic Compatibility directive 2004/108/EC

and the European Low Voltage directive 2006/95/EC.

Allen & Heath 3 WZ

16:2 and 12:2 User Guide

WARNING: This equipment must be earthed.

ATTENTION: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

Read instructions: Retain these safety and operating instructions for future reference. Adhere to all

warnings printed here and on the console. Follow the operating instructions print-

ed in this User Guide.

Do not remove cover: Operate the console with its covers correctly fitted. Disconnect mains power by

unplugging the power cord if the cover needs to be removed for setting internal

options. Refer this work to competent technical personnel only.

Power sources: Connect the console to a mains power unit only of the type described in this User

Guide and marked on the rear panel. Use the power cord with sealed mains plug

appropriate for your local mains supply as provided with the console. If the pro-

vided plug does not fit into your outlet consult your service agent for assistance.

Power cord routing: Route the power cord so that it is not likely to be walked on, stretched or

pinched by items placed upon or against it.

Grounding: Do not defeat the grounding and polarisation means of the power cord plug. Do

not remove or tamper with the ground connection in the power cord

Water and moisture: To reduce the risk of fire or electric shock do not expose the console to rain or

moisture or use it in damp or wet conditions. Do not place containers of liquids

on it which might spill into any openings.

Ventilation: Do not obstruct the ventilation slots or position the console where the air flow

required for ventilation is impeded. If the console is to be operated in a rack unit

or flightcase ensure that it is constructed to allow adequate ventilation.

Heat and vibration: Do not locate the console in a place subject to excessive heat or direct sunlight as

this could be a fire hazard. Locate the console away from any equipment which

produces heat or causes excessive vibration.

Servicing: Switch off the equipment and unplug the power cord immediately if it is exposed

to moisture, spilled liquid, objects fallen into the openings, the power cord or plug

become damaged, during lightning storms, or if smoke, odour or noise is noticed.

Refer servicing to qualified technical personnel only.

Installation: Install the console in accordance with the instructions printed in this User Guide.

Do not connect the output of power amplifiers directly to the console. Use audio

connectors and plugs only for their intended purpose.

CAUTION

WARNING -

Read the following before proceeding :

Safety Instructions

Produktspezifikationen

Marke:	Allen & Heath
Kategorie:	Mischer
Modell:	MIXWIZARD WZ4 16:2
Breite:	507 mm
Tiefe:	530 mm
Gewicht:	13000 g
Produktfarbe:	Schwarz
Höhe:	194 mm
Paketgewicht:	16000 g
Anzahl Kanäle:	16 Kanäle
Frequenzbereich:	10 - 30000 Hz
Mikrofon-Eingang:	Ja
Digital sound Bearbeitung:	- Bit
Videofunktionalität:	Nein
Übersprechen (1 kHz):	90 dB