Akai APC40 MK2 Bedienungsanleitung

Akai Hi-Fi-Anlage APC40 MK2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Akai APC40 MK2 (28 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/28

User Guide

English ( 2 – 6 )

Guía del usuario

Español ( 7 – 11 )

Guide d'utilisation

Français ( 12 – 16 )

Guida per l'uso

Italiano ( 17 – 21 )

Benutzerhandbuch

Deutsch ( 22 – 26 )

Appendix

English ( 27 )

User Guide (English)

Introduction

Box Contents

APC40 mkII USB Cable

Ableton Live Lite (download) User Guide

Software Download Card Safety & Warranty Manual

Support

For the latest information about this product (system requirements, compatibility information,

etc.) and product registration, visit akaipro.com/apc40-mkii.

For additional product support, visit akaipro.com/support.

Quick Start

1. Use the included USB cable to connect APC40 mkII's USB port to an available USB port

on your computer (powered on).

2. On your computer, open Ableton Live.

3. In Live, open the Preferences:

• Windows: Options > Preferences

• Mac OS X: Live > Preferences

4. Click the MIDI/Sync Tab.

5. Click an available Control Surface drop-down menu and select Akai APC40 mkII.

6. Click an available Input drop-down menu and select Akai APC40 mkII.

7. Click an available Output drop-down menu and select Akai APC40 mkII.

8. Close the Preferences window.

You can now use APC40 mkII with Live.

Basic Operation

Refer to this section to learn how to do basic tasks in Ableton Live using APC40 mkII.

Important: Before doing any of the following, set up APC40 mkII as a controller in Live

(described in the Quick Start section above).

To start or pause playback, press the Play button.

To start recording, press the Record button (to record normally) or the Session button (to

execute Live's Session Record feature).

To stop all clips, press the Stop All Clips button.

To launch a clip, press one of the Clip Launch buttons that corresponds to a clip in the

current 8x5 matrix. In Live, this is represented by a rectangle around the clips. The Clip

Launch buttons' colors will match the clips' colors as assigned in Live.

To stop a clip, press the Clip Stop button in the same track (column) as the clip you want to

stop.

To launch a scene, press one of the five Scene Launch buttons to the right of the 8x5 matrix

of Clip Launch buttons.

To move around the matrix of clips, use the Bank Select buttons to shift the viewable 8x5

matrix. In Live, this is represented by a rectangle around the clips. The Clip Launch buttons'

colors will match the clips' colors as assigned in Live.

To solo a track, press its Solo button.

To record-arm a track, press its Record-Arm button.

To mute or unmute a track, press its Track Activator (the button with the track's number

printed on it, above its Solo button).

To select a track, press its Track Selector (the button below the track's Clip Stop button).

To adjust volumes, use the Track Volume Faders.

To adjust panning, press the Pan button to put APC40 mkII's Assignable Knobs in Pan

Mode. The eight Assignable Knobs will control the panning positions of the current eight

tracks.

To adjust send levels, press the Sends button to put APC40 mkII's Assignable Knobs in

Sends Mode, allowing them to control the levels of Send A for the current eight tracks.

You can select a different send by pressing and holding Sends and then pressing a Track

Selector (Track Selector 1 will select Send A, Track Selector 2 will select Send B, etc.).

Note: Your return tracks will be shown in the matrix as the right-most tracks available in the

Live Set.

To use the Assignable Knobs to control other functions, press the User button to put

APC40 mkII's Assignable Knobs in User Mode. You can then assign them in Live's MIDI Map

Mode, allowing them (while in User Mode) to control whatever mappable parameters you

want.

To adjust devices:

1. Select a track by pressing the desired Track Selector.

2. If the Device View is not shown at the bottom of the window, press the Clip/Dev. View

until it is.

3. Use the Device Left/Right (



 



/ ) buttons to select the desired device.

4. Use the eight Device Control Knobs to control the parameters of the current device's

first bank. You can use the Bank Left/Right (



 



/ ) buttons to select the previous or next

bank in that device.

Tip: Alternatively, you can press the Device Lock button to lock or unlock APC40 mkII to or

from the currently selected device. When locked, you can use APC40 mkII's controls for that

device regardless of where the current focus is in your Live Set.

Produktspezifikationen

Marke:	Akai
Kategorie:	Hi-Fi-Anlage
Modell:	APC40 MK2
Anzahl USB 2.0 Anschlüsse:	1
Anzahl Kanäle:	- Kanäle
Unterstützt Windows-Betriebssysteme:	Ja
Unterstützt Mac-Betriebssysteme:	Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Digital sound Bearbeitung:	- Bit
Videofunktionalität:	Nein
DJ Mischer:	Nein