Agfa Sensor 505-X Bedienungsanleitung

Agfa Kamera Sensor 505-X

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Agfa Sensor 505-X (53 Seiten) in der Kategorie Kamera. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/53

sensor 500-X, sensor 505-X,

sensor 510-X

User manual

Thank you for purchasing this AgfaPhoto digital camera. Please read these operating instructions

carefully in order to use the digital camera correctly. Keep the instructions in a safe place after

reading so that you can refer to them later.

Notice: this User's Manual has been written for the following camera models:

AgfaPhoto sensor 500-X, AgfaPhoto sensor 505-X and AgfaPhoto sensor 510-X.

Precautions

Before using the camera, please ensure that you read and understand the safety

precautions described below. Always ensure that the camera is operated correctly.

• Do not point the camera directly into the sun or other intense light sources which could

damage your eyesight.

• Do not try to open the case of the camera or attempt to modify this camera in any way.

High-voltage internal components create the risk of electric shock when exposed.

Maintenance and repairs should be carried out only by authorized service providers.

• Do not fire the flash too close to the eyes of animals or people, especially young children.

Eye damage may result. In particular, keep at least one meter away from infants when

using the flash.

• Keep the camera away from water and other liquids. Do not use the camera with wet

hands. Never use the camera in the rain or snow. Moisture creates the danger of electric

shock.

• Keep the camera and its accessories out of the reach of children and animals to prevent

accidents or damage to the camera.

• If you notice smoke or a strange odor coming from the camera, turn the power off

immediately. Take the camera to the nearest authorized service center for repair. Never

attempt to repair the camera on your own.

• Use only the recommended power accessories. Use of power sources not expressly

recommended for this equipment may lead to overheating, distortion of the equipment,

fire, electrical shock or other hazards.

Disclaimer

We assume no responsibility over and above the provisions of the Product Liability Law for

damages suffered by the user or third parties as a result of inappropriate handling of the

product or its accessories, or by their operational failure and by their use. We reserve the right

to make changes to this product and its accessories without prior notice.

Warning! Never open the camera or remove any parts of it. This will void all guarantee

claims.

Using your batteries

For best performance and prolonged battery life, we recommend the use of AAA-sized

rechargeable NiMH batteries.

Extending battery life

The following functions use up a great deal of battery power and should therefore only be

used occasionally:

• Excessive use of flash

• Editing images on the camera display

The battery life can be affected by soiling. Please clean the contacts with a clean, dry cloth

before putting the batteries in the camera. Battery performance drops at temperatures below

5° C (41° F). If you use the camera at low temperatures you should have replacement

batteries to hand and ensure they do not get too cold. Please note: you should not dispose of

cold and seemingly flat batteries because these batteries may work again at room

temperature.

Contents

P RECAUTIONS I

D ISCLAIMER II

USING YOUR BATTERIES II

EXTENDING BATTERY LIFE II

CONTENTS ________________________ III

GETTING STARTED __________________ 1

U T MSING HIS ANUAL 1

PACKAGE CONTENTS 2

PARTS OF THE CAMERA 3

ATTACHING THE STRAP 5

I BNSERTING THE ATTERIES 5

L BOW ATTERY INDICATOR 6

INSERTING A MEMORY CARD 6

A CBOUT AMERA MEMORY 7

T P O & OURNING OWER N FF 7

P S FOWER AVING UNCTION 7

S DETTING THE ISPLAY LANGUAGE / D ATE &

TIME 8

S DETTING ISPLAY LANGUAGE 8

S D & TETTING ATE IME 9

U MSING THE LCD ONITOR 9

C MAPTURE ODE 10

V MIDEO ODE 11

PLAYBACK MODE 12

BASIC OPERATION _________________ 13

T P O & OURNING OWER N FF 13

C MHANGING THE ODE 13

S PWITCHING BETWEEN REC AND LAYBACK

MODE 13

S MELECTING THE REC ODE 14

U M MSING THE ENU IN REC ODE 15

C M LAPTURE ENU IST 16

V M LIDEO ENU IST 16

S METUP ENU 17

BASIC RECORDING_________________ 19

R S IECORDING TILL MAGES 19

S R QELECTING THE ESOLUTION AND UALITY

U Z FSING THE OOM UNCTION 21

U FSING THE LASH 22

U SSING THE ELFTIMER 23

U BSING THE URST-SNAPSHOT 24

R M CECORDING OVIE LIPS 25

S M SETTING THE OVIE IZE 25

RECORDING AUDIO 26

PLAYING BACK AUDIO 26

OTHER RECORDING FUNCTIONS _____ 27

S W BETTING THE HITE ALANCE 27

S C EETTING THE OLOR FFECT 28

S EETTING THE XPOSURE 28

S D SETTING ATE TAMP 29

PLAYBACK ________________________ 30

PLAYING B IACK MAGES 30

PLAYING B M CACK OVIE LIPS 30

U M PSING THE ENU IN LAYBACK MODE 31

V TIEWING HUMBNAILS 32

PLAYING A S SLIDE HOW 32

D FELETING ILES 33

DELETING A S FINGLE ILE 33

DELETING ALL FILES 34

FORMATTING THE SD CARD OR INTERNAL

MEMORY 34

P FROTECTING ILES 35

CHOOSING A S ITARTUP MAGE 36

S LETTING THE OGO 36

E IDITING MAGES 37

ROTATING STILL IMAGES 37

PRINTING 38

MAKING CONNECTIONS_____________ 39

C CONNECTING THE AMERA TO A TV 39

C CONNECTING THE AMERA TO A PC 40

USING A C R (ARD EADER NOT INCLUDED) 40

C CONNECTING THE AMERA TO A PC WITH

THE USB CABLE 40

SYSTEM REQUIREMENTS ___________ 41

APPENDIX_________________________ 42

A F & F NBOUT THE OLDER ILE AMES 42

F SOLDER TRUCTURE 42

N FAMING ILES 42

TROUBLESHOOTING 43

SPECIFICATIONS 44

CUSTOMER CARE 46

DISPOSAL OF WASTE EQUIPMENT BY USERS

IN PRIVATE HOUSEHOLDS IN THE EUROPEAN

UNION 47

FCC COMPLIANCE AND ADVISORY 47

Getting Started

Using This Manual

Getting Started

This section contains information you should know prior to using this camera.

Basic Operation

This section explains all recording features of the camera.

Basic Recording

This section explains how to record still images, movies and audio files.

Other Recording Functions

This section explains common operations when recording images.

Playback

This section explains playback, delete and edit functions of still images, movies and

audio ﬁles.

Making Connections

This section explains how to connect the camera to a computer or TV.

Appendix

This section provides troubleshooting and the camera specifications.

The meanings of the symbols used in this user's manual are explained below:

This indicates warnings that should be read before using these

functions.

This indicates useful information for the use of this camera.

This indicates the reference page.

Package Contents

AgfaPhoto sensor USB / AV cable 2 x AAA batteries

Pouch Strap Software Installation

CD-ROM

Quick guide

Parts of the Camera

1. Flash

2. Selftimer lamp

3. Lens

4. Operation lamp

5. LCD display

6. Playback button

Five-way control button

7. OK/Enter button

(vertically)

8. Right

9. Down

10. Up

11. Left

12. MENU button

13. Shutter button

14. Mode button

15. Power button

16. Microphone

17. Strap mount

18. Battery cover

19. USB jack

20. Tripod socket

Attaching the Strap

Attach the strap to your camera as shown

in the image.

y Do not swing the camera around by the strap

Inserting the Batteries

The camera is powered by two AAA-size alkaline batteries or rechargeable NiMH

batteries.

Open the battery cover.

Slide the battery cover in the

direction indicated by the arrows.

Insert the batteries.

Insert two AAA-size batteries

with the positive (+) and

negative (-) poles matching the

directions indicated inside the

battery compartment.

Close the battery cover.

CCaauuttiioonn

Low Battery Indicator

A low battery indicator appears on the LCD screen when the batteries are nearly

exhausted. Batteries should be replaced promptly when the low battery indicator

appears.

y There is a risk of explosion if the battery is replaced by an incorrect type.

Dispose of used batteries according to instructions.

y Be sure to turn off the camera power before inserting or removing batteries.

y Use only Alkaline or NiMH batteries to power this camera. Use of any other type

of battery is not recommended.

y Replace all batteries at the same time. Never mix old and new batteries.

y Remove batteries if you will not be using the camera for a long time.

y The camera body may feel warm after extended use. This is normal.

Inserting a Memory Card

You can use an SD card card with this digital camera. The memory card slot is adjacent

to the battery compartment.

Open the battery cover.

Slide the battery cover in the

direction indicated by the arrows.

Insert the card.

Insert the card with the label facing

up and the arrow pointing inwards.

y To remove the card, gently press on the edge of the card to release it. Pull the

card out and close the battery cover.

Close the battery cover.

CCaauuttiioonn

TTiippss

y If you insert or remove the card while the camera is powered on, it may damage

the card or data.

y Do not touch the connection terminals on the back of the card.

About Camera Memory

This camera is equipped with an internal memory. If a memory card is not inserted in the

camera, all images and movie clips recorded by the camera will be stored in the internal

memory. If a memory card is inserted, images and movie clips will be stored on the

memory card.

Turning Power On & Off

Press the Power button (1) to turn on the

camera in the Capture mode. The power

turns on and the LED (2) lights red.

Press the Power button (1) again to turn the power off. The power turns off and

the LED turns off.

y You can turn on the camera without the startup and operating sound by setting

the function [Play Logo] and [Buzzer].

y Switch between Capture mode and Playback mode ( page 13).

Power Saving Function

To save battery power, the LCD monitor automatically turns off 30 seconds after the last

control accessed (factory-preset setting). Press any button other than the power button

to turn on the LCD monitor. After the power saving function has been active for the set

time, the power will turn off completely. Press the power button to power the camera

back on. You can change the power-off timeout by setting the function [auto power off

time] in the Setup menu.

TTiippss

The power saving feature will not activate in the following situations:

y When recording movie clips or audio files

y When playing movie clips or audio files

y When playing the slideshow

y When connecting the camera to a computer or printer with the USB cable

Setting the Display Language / Date & Time

When using the camera for the first time after purchasing it, be sure to choose a

language and set the date & time before using the camera.

Setting Display Language

Turn the power on, and set the camera

to the Setup Menu ( page 17).

Select [Language].

Press or to select [Language]

then press to launch the submenu.

Select a language.

Press or on the five-way control button to select a language and press

OK/Enter button to apply the setting.

Press the MENU button to close the menu.

Setting Date & Time

Turn the power on, and set the camera

to the Setup Menu ( page 17).

Select [Date/Time].

Press or on the five-way control

button to select [Date/Time] and then

press on the five-way control button to

launch the submenu.

Set date and time.

Press or on the five-way control button to change the highlighted value. Press

on the five-way control button to move the cursor between settings.

y Holding down or changes the values continuously. For date stamp setting

( page 29).

Apply the setting.

After adjusting the settings, press OK/Enter to apply the setting. Finally press the

MENU button to close the setup menu.

Using the LCD Monitor

The LCD monitor is used to compose images while recording, adjust settings and play

back images. The following indicators may appear on the LCD monitor while recording

or playing back images.

Empty

Half

Full

20 seconds

10 seconds

11 Digital zoom bar

Video Mode

1 Video mode 2 Resolution indicator:

640 x 480

320 x 240

3 White balance indicator:

Cloudy

Daylight

Fluorescent

Tungsten

Auto

4 Memory card inserted

5 Recording time 6 Battery level indicator:

Empty

Half

Full

7 Digital zoom bar

Playback Mode

1 Playback mode:

Audio file

Video file

Still image

2 Protect indicator

3 Number of current file/total number

of recorded files

4 Battery level indicator:

Empty

Half

Full

Basic Operation

Turning Power On & Off

Press the Power button (1) to turn on the

camera in the Capture mode. The power

turns on and the LED (2) lights red.

Press the Power button (1) again to turn the power off. The power turns off and

the LED turns off.

y You can turn on the camera without the startup and operating sound by setting

the function [Play Logo] and [Buzzer].

y Switch between Capture mode and Playback mode ( page 13).

Changing the Mode

You can record images and voices in the REC mode and use the Playback mode to

replay, delete or edit images on the LCD monitor.

Switching between REC and Playback Mode

In REC mode, press the Playback button

(2) to switch to the Playback mode.

In Playback mode, press the Playback

button (2) to switch to the REC mode.

TTiippss

Selecting the REC Mode

Press the Power button to enter the Capture mode.

If the camera is in Playback mode, press the Playback button to change to REC

mode.

Press the Mode button (1) to change the REC mode.

Each time the Mode button is pressed the REC mode icon changes. It includes

three modes in REC mode: Capture mode, Video mode and Audio mode.

• The Mode button will not work when the camera is in Playback mode.

Display Title Description

Capture mode For taking still photos.

Video mode For recording movie clips.

Audio mode For recording audio files.

Using the Menu in REC Mode

When a menu is displayed, the five-way control button is used to make the desired

settings. The Audio mode does not have a menu so the MENU button will not work in

Audio mode.

Capture menu.

Turn the power on, and set the camera to

the Capture mode ( page 13).

Open the Capture menu.

Press the MENU button (2) to display the

menu.

Select an item.

Press or on the ﬁve-way control button (1) to select an item.

Change the setting.

Press on the five-way control button (1) to launch the submenu. Press or

on the five-way control button (1) to change the setting.

Press OK/Enter on the ﬁve-way control button (1) to save the settings and ﬁnally

press the MENU button (2) to close the menu

Capture Menu List

Menu item Available settings

Resolution

/ / / /

Quality / /

White balance / / / /

Color effect Color / Sepia / Monochrome

Exposure -2.0EV-------------2.0EV

Date stamp

Enable / Disable

Selftimer

Disable / 10 sec. / 20 sec.

Burst-Snapshot Single/ Burst

Video Menu List

Set the camera in Video mode then press the MENU button to display the menu.

Menu item Available settings

Resolution 640 x 480/ 320 x 240

Frame rate 30 fps / 15 fps

White balance / / / /

Audio Enable / Disable

Menu item Function

Language

Select a language for the Display menu and other information from the

following languages: [English]: English, [Italiano]: Italian, [Français]: French,

[Nederlands]: Dutch, [ [Čestina]: Czech, Русский]: Russian, [Türk]: Turkish,

[Deutsch]: German, [Español]: Spanish, [Português]: Portuguese, [Magyar]:

Hungarian, [Polski]: Polish, [ ]Ελληνικά : Greek, [ ]

体中文

体中文体中文 : S. Chinese，

[日本語

日本語

日本語日本語] Japanese

Auto

power off

To save power, the camera is turned off automatically after a period of time.

There are three options: [Disable] / [60Sec] / [120Sec].

TV output

You can review images on a television with the supplied AV cable. TV Out

should be set to either NTSC or PAL depending on your region.

[NTSC]: America, Japan and others; [PAL]: Europe, Oceania and others.

Play logo Use this function to turn the startup image on or off. [Enable] / [Disable]

Light

frequency

Light Frequency should be set to either 60Hz or 50Hz depending on your

region. [50HZ] / [60HZ].

Date /

Time

To record the shooting date and time.

Buzzer Sets the operation sound on and off. [Enable] / [Disable]

Format

To erase all data stored on the memory card if you are using a memory card, or

all data stored in the internal memory if there is no card inserted. All data will

be deleted including protected files. Be sure to download important files to your

computer before formatting. [Yes] / [No].

Default

settings

To reset the entire menu and button operation settings to initial default.

The Date & Time settings do not change after reset all.

USB mode

You can use this camera as a PC camera or removable disk. [PC Camera]:

Use as a PC camera; [Mass storage]: Use as a removable disk.

Firmware This function will show the software version.

Basic Recording

Recording Still Images

Turn the power on, and set the

camera to the Capture mode.

( page 13).

Compose the subject on the

monitor.

Point the center area of the LCD

screen at the subject that you want to

take a photo of.

Take the picture.

Press the shutter button fully down to take the picture.

y Make sure that your ﬁngers or the wrist strap do not cover the lens.

y Do not take the memory card or battery out when the camera is saving the

image, otherwise the image will not be saved completely

Selecting the Resolution and Quality

You can select a lower image resolution and quality to decrease the image size in order

to capture more images. Choose a suitable setting according to the desired image

quality and purpose.

Image size

AgfaPhoto sensor 505-X

Picture size

2592 x 1944

2048 x 1536

1600 x 1200

1280 x 960

640 x 480

Printing larger than A4 size

Printing to postcard or attaching

to E-mail

Larger

Smaller

Image size

AgfaPhoto sensor 510-X

Picture size

3264 x 2448

2592 x 1944

2048 x 1536

1600 x 1200

640 x 480

Printing larger than A4 size

Printing to postcard or attaching

to E-mail

Larger

Smaller

Image size

AgfaPhoto sensor 500-X

Picture size

2592 x 1944

2048 x 1536

1600 x 1200

1280 x 960

640 x 480

Printing larger than A4 size

Printing to postcard or attaching

to E-mail

Larger

Smaller

y The digital zoom works by enlarging the center portion of an image through a

software interpolation process.

y The digital zoom is used to achieve magnification levels up to approx. 4 times.

y The higher the digital zoom, the lower the image quality.

Using the Flash

The flash is not only for taking pictures when there is insufficient light, but also for when

the subject is in shade or with backlight conditions. Pressing the flash button cycles your

camera through the various flash modes. The flash will not activate during continuous

shooting or movie recording.

Turn the power on and set the camera

to the Capture mode ( page 13).

Press on the five-way control

button (1) to change the flash mode.

y Each time the flash button is pressed,

the flash icon (2) changes.

Auto flash:

Flash fires automatically when

shooting conditions require extra

lighting.

Full Flash:

Flash fires every time you take a photo, regardless of lighting conditions.

Flash OFF:

The flash never fires even in dark conditions.

Press shutter button to take a picture.

TTiippss

y The flash charging time may increase when the battery is low.

y The screen is blank when the flash is charging. The next image can be shot only

when charging is completed.

y Shooting with a flash in a bright environment may cause incorrect exposure.

Using the Selftimer

Use the selftimer to set a delay from the time the shutter button is pressed to the time

the image is shot. Use Burst to record continuous still image shooting.

Turn the power on, and set the camera to the Capture mode ( page 13).

Open the REC menu ( page 15).

Change the setting.

Press Mode button to launch the submenu. Press or to select [Seftimer],

then press OK/Enter to conﬁrm the setting.

Disable: Do not use Selftimer.

10 sec.:

The shutter release will delay for 10 seconds.

20 sec.:

The shutter release will delay for 20 seconds.

Press the MENU button to close the menu list. Press the shutter button to

take a picture.

y When using the selftimer function, be sure to use a tripod or place the digital

camera on a level, stable surface.

y When using the selftimer function the selftimer lamp will blink and turn off after

the picture is taken.

CCaauuttiioonn

Recording Movie Clips

Turn the power on, and set the camera to the Video mode ( page 13).

Compose the subject on the monitor.

y Point the center area of the LCD screen at the subject that you want to take.

Start recording.

y Press the shutter button to start recording.

y The LCD monitor displays the recorded time.

y The white balance is set and locked to the settings of the first frame.

Finish recording.

y Press the shutter button again to stop recording.

y The camera will stop recording automatically when the memory capacity is

full.

y When the digital zoom function is used in Movie mode the zoom bar will not

display.

Setting the Movie Size

Movie size and frame rate

Resolution Frame rate

640 x 480 30 fps / 15 fps

320 x 240 30 fps / 15fps

Higher quality

Lower quality

CCaauuttiioonn

Recording Audio

Turn the power on, and set the

camera to the Audio mode

( page 13).

Press the shutter button (1) to

start recording.

The voices are recorded via the

microphone (2) of the camera. Be

careful to avoid touching the

microphone while recording.

Press the shutter button again to end recording.

The camera will stop recording automatically when the memory capacity is full.

y Please note that this camera has no built-in speaker. Sound is only available when

connecting with TV or PC to playback..

Playing Back Audio

Turn the power on, and set the camera to the Playback mode ( page

13).

Press or on the five-way control button to select the audio file (WAV).

Start playback.

y Press the shutter button to start playing the audio file. Press it again to stop

the audio ﬁle. Press OK/Enter to pause. When the audio playback is

paused, press OK/Enter to resume.

y Please note that this camera has no built-in speaker. Sound is only available when

connecting with TV or PC to playback.

Setting the Color Effect

Set the color eﬀect to add a color tone to the picture.

Option Description

Color Reflects the true color of the object.

Sepia Adds a sepia color tone to the picture

Monochrome The pictures only have two colors: white and black.

Setting the Exposure

Set the exposure value manually to compensate for unusual lighting conditions such as

indirect indoor lighting, dark backgrounds, and strong backlighting.

Turn the power on, and set the

camera to the Capture mode

( page 13).

Open the Capture menu.

Press the MENU button (2) to

display the menu.

Select Exposure.

Press or on the ﬁve-way control button (1) to select [Exposure].

Change the setting.

Press on the five-way control button (1) to launch the submenu. Press or

on the five-way control button (1) to change the setting.

Apply the setting.

Press OK/Enter on the five-way control button (1) to apply the setting. Press the

MENU button to close the menu.

Setting Date Stamp

The date stamp function can be used to add a date to your pictures as you take them.

Option Description

Enable

Add the recording date & time to printed images.

Disable

Do not add the recording date & time to printed images.

Using the Menu in Playback Mode

When a menu is displayed, the five-way control button is used to make the desired

settings.

Using the Menu in Playback Mode

Turn the power on and set the

camera to the Playback mode

( page 13).

Open the Playback menu.

Press the Menu button (2) to display

the menu.

Select an item.

Press or on the ﬁve-way control button (1) to select an item.

Change the setting.

Press on the five-way control button (1) to launch the submenu. Press or

on the five-way control button (1) to change the setting.

Press OK/Enter (1) to save the settings and finally press the Menu button (2) to

close the menu.

• If the item in the menu list is gray it means this item doesn’t work in this file format.

Deleting Files

Deleting a Single File

Turn the power on, and set the camera to the Playback mode ( page

13).

Select the file you want to delete.

When the file is shown in full screen, press or on the five-way control

button to select the ﬁle you want to delete.

Open the menu.

Press the MENU button, then press or on the five-way control button to

select [Delete current].

Delete the file.

Press on the five-way control button to delete the file.

To quickly delete the current image:

1: Set the file shown in thumbnail mode.

2: Press / / / on the five-way control button to select the file you want to

delete.

3: Press the MENU button to display the dialog “Confirm delete? Yes/ No”.

4: Press on the five-way control button to select “Yes” then press OK/Enter to

delete it.

Deleting All Files

Turn the power on, set the camera to Playback mode.

Open the menu

Press the MENU button. Then press or on the five-way control button to

select [Delete all].

Delete the files

Press on the five-way control button to delete the files.

• All the files can be deleted except the protected files.

Formatting the SD Card or Internal Memory

Turn the power on and set the camera to any mode except Audio mode.

Open the menu.

Press the MENU button, then press on the five-way control button to select

[Setup]. Now press or on the five-way control button to select [Format].

Formatting the SD card or internal memory.

Press on the five-way control button to launch the submenu.

Press or on the five-way control button to select [Yes] and then press

OK/Enter to format .

• Use this function to erase all data stored on the memory card if you are using a

card, or all data stored in the internal memory if there is no card inserted.

• Be sure to backup all important ﬁles before formatting.

TTiippss

Protecting Files

Turn the power on and set the

camera to the Playback mode

( page 13).

Select a file to be protected. If you want

to protect a single file select it before

operating the following steps. Press

or on the five-way control button to

select a recorded file

Open the menu.

Press the MENU button, then use the five-way control button to select [Lock].

Press on the five-way control button to launch the submenu:

y [Lock current]: Protects a single file

y [Lock all]: Protects all files

y [Unlock current]: Unprotects the selected protected file

y [Unlock all]: Unprotects all the protected files

Select an item.

Press or on the five-way control button to select an item.

Apply the setting.

Press OK/Enter to apply the setting.

Close the menu.

Press the MENU button to close the menu.

• An icon will be displayed on protected files.

• Protected files cannot be deleted; however if the SD card / MMC card or internal

memory are formatted, the protected files will also be erased.

• An icon will be displayed on protected files.

• Protected files cannot be deleted; however if the SD card or internal memory are

formatted, the protected files will also be erased.

Choosing a Startup Image

Setting the Logo

Turn the power on, and set the camera to the Playback mode.

Select a still image as startup image.

Press or on the five-way control button to select a still image.

Open the menu.

Press the MENU button, then use the five-way control button to select [Set Logo]

then press on the five-way control button to launch the submenu: [Yes]; [No].

Apply the setting.

Press or on the five-way control button to select [Yes] then press OK/Enter

to apply the setting.

Close the menu.

Press the MENU button to close the menu.

• The startup image will not be deleted even if the original image is deleted or the

memory is formatted.

TTiippss

Editing Images

Rotating Still Images

Turn the power on, and set the camera to the Play mode ( page 13).

Press or on the five-way control button to select the image you want to

rotate.

Open the menu.

Press the MENU button, then use the five-way control button to select [ Rotate]

and finally press on the five-way control button to launch the submenu:

[90°]: Rotates the image 90 degrees clockwise

[180°]: Rotates the image 180 degrees clockwise

[270°]: Rotates the image 270 degrees clockwise

Select an item.

Press or on the five-way control button to select the degrees.

Apply the setting.

Press OK/Enter to apply the setting.

Close the menu.

Press the MENU button to close the menu.

• If the picture size is 5 megapixel or more the rotating function will not work.

Making Connections

Connecting the Camera to a TV

You can display recorded images on a television with the supplied AV cable.

Set the TV-out to match the TV system that you are using.

Turn off the camera and the TV.

Use the supplied AV cable to connect the camera to the TV set.

Then turn on the camera and the TV.

Set the TV input signal to Video In.

y Refer to the documentation included with your TV for more information.

Display on TV.

y Everything that would normally appear on the camera's LCD screen, such

as photos and video clip playback, slide shows and image or video capture,

will appear on the TV. The camera’s LCD screen turns off.

Produktspezifikationen

Marke:	Agfa
Kategorie:	Kamera
Modell:	Sensor 505-X

Brauchst du Hilfe?

Wenn Sie Hilfe mit Agfa Sensor 505-X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Kamera Agfa

Agfa DC5200 Bedienungsanleitung

23 August 2024

Agfa DC-833m Bedienungsanleitung

14 August 2024

Agfa DC-733s Bedienungsanleitung

7 August 2024

Agfa Optima 103 Bedienungsanleitung

5 August 2024

Agfa Compact 100 Bedienungsanleitung

3 August 2024

Agfa Sensor 500-X Bedienungsanleitung

2 August 2024

Agfa Optima 1 Bedienungsanleitung

31 Juli 2024

Agfa DC-600uw Bedienungsanleitung

31 Juli 2024

Agfa Optima 1338mT Bedienungsanleitung

30 Juli 2024

Agfa AP Compact 100 Bedienungsanleitung

30 Juli 2024

Bedienungsanleitung Kamera

Neueste Bedienungsanleitung für -Kategorien-

Nikon Z 6II Bedienungsanleitung

3 Dezember 2024

Kogan KAKIDCIPPLA Bedienungsanleitung

3 Dezember 2024

Anker Prime Bedienungsanleitung

30 November 2024

Trust Powerc@m 820 Bedienungsanleitung

15 Oktober 2024

Bushnell Trophy Cam 119456 Bedienungsanleitung

13 Oktober 2024

Polaroid 600 Series Bedienungsanleitung

9 Oktober 2024

Fujifilm FinePix F500EXR Bedienungsanleitung

7 Oktober 2024

Rollei Giro 105 Bedienungsanleitung

6 Oktober 2024

Leica R3 Bedienungsanleitung

5 Oktober 2024

Rollei Compactline 52 Bedienungsanleitung

5 Oktober 2024