Adapt AD-300 Bedienungsanleitung

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Adapt AD-300 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Bluetooth GPS
Receiver
User’s Guide
June 12, 2004 V 1.0
Bluetooth GPS Button & Signals
Power
Button
LED1
LED2
External
Power
Socket
Bluetooth GPS Quick Tips
After acquiring your Bluethooth GPS Receiver, proceed with the following steps:
1. Install battery. Fully charge battery for at least eight hours before first
use.
Battery low When LED 1 flashes green light, it signals battery low. Connect Bluethooth GPS Receiver
to a power source for continue operation and recharge simultaneously.
Charging When battery is being charged, LED 1 turns to orange light; When the battery has been
fully charged, LED 1 turns to green light.
2.Turn on Bluethooth GPS Receiver
Press the power button for 2 second or until LED1 turns into red and green shifting light, and the
LED 2 turns to blue flashing light. This is to activate Bluetooth pairing, it’s required only once at
first use.
3. Activate Bluetooth function of your PDA / PC
Prior to activating the Bluetooth function of your PDA / PC, make sure the device is equipped with
Bluetooth function, and the driver software has been installed.
4. Activate Bluetooth Manager & Established New Connections
Illustrations using HP 2100 PDA as follows:
1. First, find the device with which you wish to establish connection.
2. Open “Bluetooth Manager” on your pocket pc.
3. Press “New”.
4. Press "Connect”.

Produktspezifikationen

Marke: Adapt
Kategorie: Nicht kategorisiert
Modell: AD-300

Brauchst du Hilfe?

Wenn Sie Hilfe mit Adapt AD-300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Adapt

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-