Acer XB273K Bedienungsanleitung

Acer Monitor XB273K

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Acer XB273K (3 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the DP (optional) and/or HDMI (optional)
input socket of the monitor, and the DP (optional) and/or HDMI
(optional) output socket of the graphics card on the computer. Then
tighten the thumbscrews on the signal cable connector.
3. Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Connect the power adapter and power cord to the monitor, then to a
properly grounded AC outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
USB
DP
PLEASE READ THIS BEFORE SETTING UP YOUR MONITOR.
To ensure that your PC can support this NVIDIA
®
G-SYNCTM
HDRmonitor,downloadandinstallthelatestgraphicsdriverandfirmwareforyourGEFORCE
® GTX 10 Series
graphics
card from this link:
http://www.nvidia.com/object/nv-uefi-update.html
For additional support, please contact Acer Customer Care at
http://www.acer.com/worldwide/support/
G-SYNC :
G-SYNC requires an NVIDIA GeForce GTX 1070 BOOST GPU or higher. For more information, visit the nVidia® website:
http://www.nvidia.com/page/home.html
1
2
3
4
5
English
External controls
1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving
mode.
2 Function key
/
a. Press to view Main page. Press again to enter hotkey1 function.
b. When the Function Menu is active, press this key to view the basic information
for your monitor and current input or reset the custom color settings to the factory
defaults.
3 Function key
/
a. Press to view Main page.Press again to enter hotkey2 function.
b. When the Function Menu is active, press this button to select scenario mode or
game mode .
4 Function key
/
X
a. Press to view Main page.Press again to enter Input select function.
b. When the Function Menu is active, this button will quit the OSD.
5 Function key
/
a. Press to view Main page.Press again to enter next function in the Function Menu.
b. The single toggle button on the backside of the Display bezel operates like a
joystick. To move the cursor, simply toggle the button in four directions. Press the
button to select desired option.Red indicates operable. Grey indicates inoperable.
Note: Acer monitor is purposed for video and visual display of information obtained from electronic
devices.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which
can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant
provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive
2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC
regulations.
Notice: Peripheral devices
Onlyperipherals(input/outputdevices,terminals,printers,etc.)certifiedtocomplywiththeClassBlimitsmaybeattached
tothisequipment.Operationwithnon-certifiedperipheralsislikelytoresultininterferencetoradioandTVreception.
Caution
Changesor modificationsnotexpressly approvedbythe manufacturercouldvoid theuserauthority,which isgrantedby
the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of
with your other household waste. Instead, it is your responsibility to dispose of your waste equipment
by handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal
will help to conserve natural resources and ensure that it is recycled in a manner that protects
human health and the environment. For more information about where you can drop off your waste
equipmentforrecycling,pleasecontactyourlocalcityoffice,yourhouseholdwastedisposalservice
or the shop where you purchased the product.
English
SPECIFICATION
LCD Panel
Driving system TFT Color LCD
Size 27"W (69cm)
Pixel pitch 0.15mm(H) x 0.15mm(V)
Brightness Native 350nits, HDR mode: peak 400nits
Contrast 1,000:1 (Native)
Viewable angle 178° (H) 178° (V) (CR 10) (Typical)
Response time 4ms (G to G,Typical)
Panel Type In-Plane Switching
Video Digital interface
H-Frequency 30KHz-140KHz(3840x2160@60Hz)
52kHz-322kHz(3840x2160@144Hz )
V-Frequency 24Hz-60Hz(3840x2160@60Hz)
24Hz-144Hz(3840x2160@144Hz)
Display Colors 1.07B Colors
Dot Clock 600MHz
Max. Resolution
3840x2160@120Hz
Normal mode:
HDMI: 3840x2160@60Hz, DP: 3840x2160@120Hz
Overclocking mode: DP: 3840x2160@144Hz
Plug & Play VESA DDCCI/DDC2B
EnergyEfficiencyClass D
*Annual Energy Consumption 96 (kWh) (for HDMI-input Model)
Power consumption
@200cd/m2
ON Mode 65W(typ.)
Sleep Mode 0.5W(typ.)
Off Mode 0.4W(typ.)
Input Connector
HDMI (Only HDMI Model)
DP (Only DP-Input Model)
USB Hub / USB3.0 x 4 (Only USB Hub Model)
Input Video Signal DP signal (Only DP Model)
HDMI signal (Only HDMI-Input Model)(Optional)
Speakers 4W x 2
Audio Audio-Output (Only Audio-Output Model)
Maximum Screen Size Horizontal:596.16mm
Vertical:335.34mm
Power Source 100-240V~, 50/60Hz
Environmental
Considerations
Operating Temp: 5° to 35°C
Storage Temp: -20° to 60°C
Operating Humidity: 20% to 80%
Dimensions 629.0(W) x 441~541(H) x 307.2(D)mm
Weight (N. W.) 7.19kg Unit (net)
Mechanism spec
Tilt: -5° to 25° (Only at the highest point can 25 degrees of recline be
offered for the angle of elevation)
Swivel: +/- 20°
Height adjustment: 100 mm
Pivot: No
Detachable foot stand: No
External
Controls: Functions
Peak/Ref. White
Contrast
Dark boost
Blue Light
Backlight Response
SDR Variable Backlight
Auto Brightness
Auto Black Level
Relative Gamma
SDR Colors sRGB
DP YCbCr sRGB
HDMI YCbCr sRGB
Color Temp.
Volume
Over Drive
Over Clock
Aim point
Language
OSD timeout
Transparency
Refresh rate num
OSD Lock
Input
Ambient Light
Hot Key Assignment
Wide Mode
Deep Sleep
Quick Start Mode
*Allspecificationsaresubjecttochangewithoutnotice.
FindmanualsandotherdocumentsforyourAcerproductontheofficialAcersupportwebsite.
*Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per year.


Produktspezifikationen

Marke: Acer
Kategorie: Monitor
Modell: XB273K

Brauchst du Hilfe?

Wenn Sie Hilfe mit Acer XB273K benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Monitor Acer

Bedienungsanleitung Monitor

Neueste Bedienungsanleitung für -Kategorien-