Acer KA270HD Bedienungsanleitung

Acer Monitor KA270HD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Acer KA270HD (3 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any

nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this

range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the VGA (optional) and/or DVI-D

(optional) and/or HDMI (optional) input socket of the monitor, and

the VGA (optional) and/or DVI-D (optional) and/or HDMI (optional)

output socket of the graphics card on the computer. Then tighten the

thumbscrews on the signal cable connector.

3. Optional: Connect the audio input socket (AUDIO IN) of the LCD

monitor and the line-out port on the computer with the audio cable.

4. Insert the monitor power cable into the power port at the back of the

monitor.

5. Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user manual for more instruction.

External controls

1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates standby/

power saving mode.

3&4 </> Minus / Plus If the OSD is active, press the or buttons to toggle between the OSD Minus Plus

options. If the OSD is inactive, press the or buttons to adjust the Minus Plus

volume. (Optional).

5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.

6 Auto Auto If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press

Auto and the monitor will automatically optimize the display position, focus, and

clock of your display.

7 Empowering Key Press this button to select scenario mode.

English

Note: Acer monitor is purposed for video and visual display of information obtained from electronic

devices.

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can

be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certied to comply with the Class B limits may be attached to

this equipment. Operation with non-certied peripherals is likely to result in interference to radio and TV reception.

Caution

Changes or modications not expressly approved by the manufacturer could void the user authority, which is granted by the

Federal Communications Commission, to operate this product.

In order to prevent damage to the monitor, do not lift the monitor by its base.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

Notice: Canadian users

CAN ICES-3(B)/NMB-3(B)

English

SPECIFICATION

LCD Panel

Driving system TFT Color LCD

Size 27"W (69cm)

Pixel pitch 0.3113mm(H) x 0.3113mm(V)

Brightness 300cd/m2(Typical)

Contrast 100,000,000:1Max. (ACM)

Viewable angle 170° (H) 160° (V) (CR=10) 176°(H),170°(V) (CR=5)

Response time 5ms (on/off)

Panel Type TN

H-Frequency 30-91KHz

V-Frequency 55-76Hz

Display Colors 16.7M Colors

Dot Clock DVI 170MHz, VGA/HDMI 180MHz

Max. Resolution 1920x1080@75Hz

Plug & Play VESA DDCCI/DDC2B

Power consumption

ON Mode 15.9W

Standby Mode 0.38W

Off Mode 0.28W

Input Connector

D-Sub

DVI-D 24pin (Only Dual-Input Model)

HDMI (Only HDMI Model)

Input Video Signal

Analog:0.7Vp-p(standard), 75 OHM, Positive

Digital signal (Only Dual-Input Model)

HDMI signal (Only HDMI-Input Model)

Speakers 2W x 2(Only Audio-Input Model)

Audio Audio-Input (Only Audio-Input Model)

Audio-Output (Only Audio-Output Model)

Maximum Screen Size Horizontal:598mm

Vertical:336mm

Power Source 100-240V~, 50/60Hz

Environmental

Considerations

Operating Temp: 0° to 40°C

Storage Temp: -20° to 60°C

Operating Humidity: 20% to 80%

Dimensions 614 (W) x 465 (H) x 200 (D)mm

Weight (N. W.) 6.09kg Unit (net)

Mechanism spec

Tilt: -5° to +15°

Swivel: No

Height adjustment: No

Pivot: No

Detachable foot stand: Yes

External

Controls:

Switch / Buttons

Power Button

Left(<) /Right(>)

MENU/ENTER

Auto/ Exit

E(Empowering) Key

Functions

Acer Color Management

Blue Light

Brightness

Contrast

Color Temp

6 axis Hue

6 axis Saturate

Auto Cong (only Analog input model)

H. Position (only Analog input model)

V. Position (only Analog input model)

Focus (only Analog input model)

Clock (only Analog input model)

Language

OSD Timeout

Wide Mode

DDC/CI

ACM

Input

Auto Source

Quick Start Mode

Reset

Gamma

*Specications may vary depending on model, sku and/or region.

Find manuals and other documents for your Acer product on the ofcial Acer support website.

Produktspezifikationen

Marke:	Acer
Kategorie:	Monitor
Modell:	KA270HD
Touchscreen:	Nein
Bildschirmdiagonale:	27 Zoll
Bildschirmtechnologie:	LED
Anzahl der Farben des Displays:	16,78 Millionen Farben
Eingebaute Lautsprecher:	Nein
Integrierte Kamera:	Nein
Produktfarbe:	Schwarz
Höhenverstellung:	Nein
Neigungsverstellung:	Ja
Display:	LED
Stromverbrauch (Standardbetrieb):	32 W
Warentarifnummer (HS):	85285210
Betriebsanleitung:	Ja
HD-Typ:	Full HD
Bildschirmform:	Flach
Natives Seitenverhältnis:	16:9
Reaktionszeit:	4 ms
Kontrastverhältnis:	3000:1
Bildwinkel, horizontal:	178 °
Bildwinkel, vertikal:	178 °
Anzahl HDMI-Anschlüsse:	1
Energieeffizienzklasse (SDR):	F
Energieverbrauch (SDR) pro 1.000 Stunden:	26 kWh
Energieverbrauch (HDR) pro 1.000 Stunden:	- kWh
Stromverbrauch (Standby):	- W
Energieeffizienzskala:	A bis G
Kontrastverhältnis (dynamisch):	100000000:1
HDCP:	Ja
Gewicht (ohne Ständer):	3740 g
Breite (ohne Standfuß):	567 mm
Tiefe (ohne Standfuß):	192 mm
Höhe (ohne Standfuß):	435 mm
VESA-Halterung:	Ja
Unterstützte Grafik-Auflösungen:	1920 x 1080 (HD 1080)
3D:	Nein
DVI Anschluss:	Ja
Panel-Montage-Schnittstelle:	100 x 100 mm
Ein-/Ausschalter:	Ja
Neigungswinkelbereich:	-5 - 35 °
Kabelsperre-Slot:	Nein
Maximale Bildwiederholrate:	60 Hz
Pixeldichte:	82 ppi
Anzahl VGA (D-Sub) Anschlüsse:	1
Seitenverhältnis:	16:9
Stromverbrauch (aus):	0.24 W
Panel-Typ:	VA
Helligkeit (typisch):	300 cd/m²
Pixel Abstand:	0.311 x 0.311 mm
Integrierter USB-Hub:	Nein
TV Tuner integriert:	Nein
Display-Oberfläche:	Matt
Fußfarbe:	Schwarz
Thin Client installiert:	Nein
Display-Auflösung:	1920 x 1080 Pixel